cpufreq: ondemand: Fix typos in comments

index 09b27ae..f3eb26c 100644
@@ -26,7 +26,7 @@
 
 #include "cpufreq_governor.h"
 
-/* On-demand governor macors */
+/* On-demand governor macros */
 #define DEF_FREQUENCY_DOWN_DIFFERENTIAL		(10)
 #define DEF_FREQUENCY_UP_THRESHOLD		(80)
 #define DEF_SAMPLING_DOWN_FACTOR		(1)

@@ -66,7 +66,7 @@ static void ondemand_powersave_bias_init_cpu(int cpu)
  * efficient idling at a higher frequency/voltage is.
  * Pavel Machek says this is not so for various generations of AMD and old
  * Intel systems.
- * Mike Chan (androidlcom) calis this is also not true for ARM.
+ * Mike Chan (android.com) claims this is also not true for ARM.
  * Because of this, whitelist specific known (series) of CPUs by default, and
  * leave all others up to the user.
  */

@@ -74,7 +74,7 @@ static int should_io_be_busy(void)
 {
 #if defined(CONFIG_X86)
 	/*
-	 * For Intel, Core 2 (model 15) andl later have an efficient idle.
+	 * For Intel, Core 2 (model 15) and later have an efficient idle.
 	 */
 	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
 			boot_cpu_data.x86 == 6 &&

@@ -159,8 +159,8 @@ static void dbs_freq_increase(struct cpufreq_policy *p, unsigned int freq)
 
 /*
  * Every sampling_rate, we check, if current idle time is less than 20%
- * (default), then we try to increase frequency Every sampling_rate, we look for
- * a the lowest frequency which can sustain the load while keeping idle time
+ * (default), then we try to increase frequency. Every sampling_rate, we look
+ * for the lowest frequency which can sustain the load while keeping idle time
  * over 30%. If such a frequency exist, we try to decrease to this frequency.
  *
  * Any frequency increase takes it to the maximum frequency. Frequency reduction

@@ -267,7 +267,7 @@ static ssize_t show_sampling_rate_min(struct kobject *kobj,
  * update_sampling_rate - update sampling rate effective immediately if needed.
  * @new_rate: new sampling rate
  *
- * If new rate is smaller than the old, simply updaing
+ * If new rate is smaller than the old, simply updating
  * dbs_tuners_int.sampling_rate might not be appropriate. For example, if the
  * original sampling_rate was 1 second and the requested new sampling rate is 10
  * ms because the user needs immediate reaction from ondemand governor, but not