ath9k_htc - please test new images
AP mode with kernel-3.0.66 and TL-WN821N,
htc_7010.fw works but data speed is very low ~100kb/s (version from 20121128 works fine here).
Am 24.02.2013 06:57, schrieb Roman Elshin:
Quoted 3 lines
AP mode with kernel-3.0.66 and TL-WN821N,
htc_7010.fw works but data speed is very low ~100kb/s (version from 20121128 works fine here).
Uff i forgot speed test ;)
Netgera wnda3200 (AR7010 + AR9280), old (20121128) firmware ~10 MB/s (client mode) if close to AP. New firmware ~1 MB/s if close (1 meter) and ~5MB/s if not so close (3 meter) to ap.
Signature · 2 lines
Regards, Oleksij
Quoted 7 lines · Oleksij Rempel
Am 24.02.2013 06:57, schrieb Roman Elshin:
Quoted 3 lines
AP mode with kernel-3.0.66 and TL-WN821N,
htc_7010.fw works but data speed is very low ~100kb/s (version from 20121128 works fine here).
Quoted 5 lines
Uff i forgot speed test ;)
Netgera wnda3200 (AR7010 + AR9280), old (20121128) firmware ~10 MB/s (client mode) if close to AP. New firmware ~1 MB/s if close (1 meter) and ~5MB/s if not so close (3 meter) to ap.
Hi,
That's good to know. It's possible there's more hidden gotchas in the code as we move from the proprietary tensilica compiler to the open source version.
I'll update the internal list with this information and see if others can reproduce and diagnose this.
Thanks!
Adrian
Quoted 3 lines · Roman Elshin
AP mode with kernel-3.0.66 and TL-WN821N,
htc_7010.fw works but data speed is very low ~100kb/s (version from 20121128 works fine here).
Hi!
Please try this:
http://developer.atheros.com/~adrian/htc/20130225/
* I've left the version number at 1.3, so you don't need to modify your firmware version in ath9k_htc;
* Felix and I have fixed up the rate table handling again so it should be using the correct rate configuration (and thus performance should be back to normal)
Please let me know if this works better.
Thanks!
Adrian
Am 25.02.2013 23:17, schrieb Adrian Chadd:
Quoted 17 lines · Roman Elshin
Quoted 3 lines
AP mode with kernel-3.0.66 and TL-WN821N,
htc_7010.fw works but data speed is very low ~100kb/s (version from 20121128 works fine here).Hi!
Please try this:
http://developer.atheros.com/~adrian/htc/20130225/
* I've left the version number at 1.3, so you don't need to modify your firmware version in
ath9k_htc;
* Felix and I have fixed up the rate table handling again so it should be using the correct rate configuration (and thus performance should be back to normal)
Quoted 3 lines
Please let me know if this works better.
Thanks!
AR9271 and AR7010+AR9280 works fine for me. No problems with authentication and both have good speed, in my network about 8-10MB/s.
Signature · 2 lines
Regards, Oleksij
Quoted 2 lines · Oleksij Rempel
AR9271 and AR7010+AR9280 works fine for me. No problems with authentication and both have good speed, in my network about 8-10MB/s.
Sweet, thanks!
Adrian
Quoted 8 lines
Please let me know if this works better.
Thanks!
Adrian
htc_7010.fw - now it works better. It looks like speed is higher than with 20121128, but this may be luck , will see further.