U-Boot Recipes
Today I was building an image for the beaglebone with oe-core + meta-beagleboard. meta-beagleboard pretty much provides the machine definition and the kernel. In order to build the correct u-boot (2013.01+) I had to add u-boot 2013.01 to oe-core. Whilst during this I noticed the mess that the u-boot directory had become, I think we need to have a show of hands who uses what u-boot recipes and can they migrate to newer (common) versions.
When I submit a patch to get 2013.01 supported, that would make 4 different releases of u-boot; which seems a bit excessive.
Thoughts?
Signature · 5 lines
Jack Mitchell ([email protected]) Embedded Systems Engineer http://www.embed.me.uk --
Quoted 7 lines · Jack Mitchell
Today I was building an image for the beaglebone with oe-core + meta-beagleboard. meta-beagleboard pretty much provides the machine definition and the kernel. In order to build the correct u-boot (2013.01+) I had to add u-boot 2013.01 to oe-core. Whilst during this I noticed the mess that the u-boot directory had become, I think we need to have a show of hands who uses what u-boot recipes and can they migrate to newer (common) versions.
The mpc8315e-rdb reference uses v2012.04, and a quick survey didn't turn up any other explicit preferred versions in the layers that I have around my development machine.
So for now v2012.04 needs to stay, but as we bump that board to the 3.8 kernel, we can give another bootloader a test run.
Quoted 3 lines
When I submit a patch to get 2013.01 supported, that would make 4 different releases of u-boot; which seems a bit excessive.
Most releases that I've ever used have kept compatibility fairly well, so I'm all for keeping the number of active versions to a minimum. I'd say three is a good number, since that matches the number of active kernel versions in oe-core as well.
Cheers,
Bruce
Quoted 9 lines
Thoughts?
--
Jack Mitchell ([email protected])
Embedded Systems Engineer
http://www.embed.me.uk
Quoted 7 lines
--
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
--
"Thou shalt not follow the NULL pointer, for chaos and madness await thee at its end"
Quoted 17 lines · Bruce Ashfield
Quoted 7 lines · Jack Mitchell
Today I was building an image for the beaglebone with oe-core + meta-beagleboard. meta-beagleboard pretty much provides the machine definition and the kernel. In order to build the correct u-boot (2013.01+) I had to add u-boot 2013.01 to oe-core. Whilst during this I noticed the mess that the u-boot directory had become, I think we need to have a show of hands who uses what u-boot recipes and can they migrate to newer (common) versions.
The mpc8315e-rdb reference uses v2012.04, and a quick survey didn't turn up any other explicit preferred versions in the layers that I have around my development machine.
So for now v2012.04 needs to stay, but as we bump that board to the 3.8 kernel, we can give another bootloader a test run.
Quoted 1 line
Quoted 7 lines
Quoted 2 lines
When I submit a patch to get 2013.01 supported, that would make 4 different releases of u-boot; which seems a bit excessive.
Most releases that I've ever used have kept compatibility fairly well, so I'm all for keeping the number of active versions to a minimum. I'd say three is a good number, since that matches the number of active kernel versions in oe-core as well.
I think one u-boot would be nice. Lets see if we can bump up the mpc8315e-rdb version...
Cheers,
Richard
Quoted 21 lines · Richard Purdie
Quoted 20 lines · Bruce Ashfield
Quoted 7 lines · Jack Mitchell
Today I was building an image for the beaglebone with oe-core + meta-beagleboard. meta-beagleboard pretty much provides the machine definition and the kernel. In order to build the correct u-boot (2013.01+) I had to add u-boot 2013.01 to oe-core. Whilst during this I noticed the mess that the u-boot directory had become, I think we need to have a show of hands who uses what u-boot recipes and can they migrate to newer (common) versions.
The mpc8315e-rdb reference uses v2012.04, and a quick survey didn't turn up any other explicit preferred versions in the layers that I have around my development machine.
So for now v2012.04 needs to stay, but as we bump that board to the 3.8 kernel, we can give another bootloader a test run.
Quoted 3 lines
When I submit a patch to get 2013.01 supported, that would make 4 different releases of u-boot; which seems a bit excessive.
Quoted 7 lines
Quoted 4 lines
Most releases that I've ever used have kept compatibility fairly well, so I'm all for keeping the number of active versions to a minimum. I'd say three is a good number, since that matches the number of active kernel versions in oe-core as well.
I think one u-boot would be nice. Lets see if we can bump up the mpc8315e-rdb version...
That's always the goal, but time and effort comes into play .. I've got my hands full with my current items and won't commit to a bump, since I won't commit .. and then miss.
If someone else does the bump, that's an option .. but I have no idea who that someone else would be.
One random thought (for no real reson is that this is one particular area that commercial and upstream differ .. we almost never bump our u-boot versions once they work, since there's no benefit and only risk to updating the firmware and reflashing the board (heck, even *building* uboot) when it is older and doesn't have any missing functionality.
That being said, I'll see what I can do, but no promises. In the mean time, the version called out in the reference board should stay around.
Cheers,
Bruce
Quoted 5 lines
Cheers,
Richard
Signature · 2 lines
"Thou shalt not follow the NULL pointer, for chaos and madness await thee at its end"