Skip to contentSkip to conversation

Beagle-XM: u-boot SPL fat support (was Re: [opensuse-arm] Beagleboard Xm CPU speed)

U-Boot Nishanth Menon 4 participants 8 messages Mar 19, 2013 – May 11, 2013 10 messages not in the archive

lore
Share & tools
lore
#10 lore raw
In reply to a message not in the archive

Change in subject.
Original thread start:
http://lists.opensuse.org/opensuse-arm/2013-03/msg00076.html

Quoted 19 lines · Guillaume Gardet

Le 19/03/2013 17:04, Nishanth Menon a ?crit :

Quoted 17 lines · gary
Quoted 16 lines

Just a FYI, here is the the boot text dumped to the serial port. It indicates a 1GHz max clock rate, but maybe that is just a "capability" of the board (as in a designation) and not a parameter that has been set.

I see in the boot text there is a way to interrupt the automatic boot, which I presume is a way to set parameters. Could someone give me what such a line would look like for forcing the mpurate?

---------------------------------------
Texas Instruments X-Loader 1.5.0 (Sep 8 2012 - 02:21:18) Beagle xM
Reading boot sector
Error: reading boot sector
fat load failed, trying ext2
Loading u-boot.bin from mmc

Quoted 4 lines
Quoted 2 lines

Why are we still using old x-loader - we should be using SPL MLO from u-boot master - it works straight on beagleXM.

Our last tests with SPL and latest u-boot were unsuccessful! And we have to port ext2 support to it because we have no FAT partition.

Quote from an internal query I just did:
"There shouldn't be a
case where xM has memory that X-Loader works for that SPL did not. There _may_ be a UART issue that needs work-arounding however. And of course if they used mainline they could pretty easily do RAW for SPL/U-Boot.img and then do everything else with ext2/3/4 and ignore FAT. "

I am ccying u-boot Mailing list to see how we can help.

Signature · 2 lines
Regards,
Nishanth Menon
#11 lore raw
Quoted 24 lines · Nishanth Menon

Change in subject.
Original thread start:
http://lists.opensuse.org/opensuse-arm/2013-03/msg00076.html

Quoted 19 lines · Guillaume Gardet

Le 19/03/2013 17:04, Nishanth Menon a ?crit :

Quoted 17 lines · gary
Quoted 16 lines

Just a FYI, here is the the boot text dumped to the serial port. It indicates a 1GHz max clock rate, but maybe that is just a "capability" of the board (as in a designation) and not a parameter that has been set.

I see in the boot text there is a way to interrupt the automatic boot, which I presume is a way to set parameters. Could someone give me what such a line would look like for forcing the mpurate?

---------------------------------------
Texas Instruments X-Loader 1.5.0 (Sep 8 2012 - 02:21:18) Beagle xM
Reading boot sector
Error: reading boot sector
fat load failed, trying ext2
Loading u-boot.bin from mmc

Quoted 7 lines
Quoted 4 lines
Quoted 2 lines

Why are we still using old x-loader - we should be using SPL MLO from u-boot master - it works straight on beagleXM.

Our last tests with SPL and latest u-boot were unsuccessful! And we have to port ext2 support to it because we have no FAT partition.

Quote from an internal query I just did:
"There shouldn't be a
case where xM has memory that X-Loader works for that SPL did not.

The issue was that with SPL and proper upstream u-boot from ~fall last year, my beagleboard xm was unstable. It constantly crashed. So I reverted back to the old x-loader booting, as that kept things stable.

Quoted 3 lines

There _may_ be a UART issue that needs work-arounding however. And of course if they used mainline they could pretty easily do RAW for SPL/U-Boot.img and then do everything else with ext2/3/4 and ignore FAT.

The "default" that we stuck with so far (though we can certainly change that) is to keep u-boot as a file in ext2, so that it can easily be updated. That maybe wasn't the most clever decision and going with raw is the way to go, but it's what we do today.

Alex

#12 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 30 lines · Alexander Graf
Quoted 27 lines · Nishanth Menon

Change in subject. Original thread start:
http://lists.opensuse.org/opensuse-arm/2013-03/msg00076.html

Quoted 23 lines · Guillaume Gardet

Le 19/03/2013 17:04, Nishanth Menon a ?crit :

Quoted 11 lines · gary
Quoted 10 lines

Just a FYI, here is the the boot text dumped to the serial port. It indicates a 1GHz max clock rate, but maybe that is just a "capability" of the board (as in a designation) and not a parameter that has been set.

I see in the boot text there is a way to interrupt the automatic boot, which I presume is a way to set parameters. Could someone give me what such a line would look like for forcing the mpurate?

Quoted 6 lines
Quoted 4 lines

--------------------------------------- Texas Instruments X-Loader 1.5.0 (Sep 8 2012 - 02:21:18) Beagle xM Reading boot sector Error: reading boot sector fat load failed, trying ext2 Loading u-boot.bin from mmc

Why are we still using old x-loader - we should be using SPL MLO from u-boot master - it works straight on beagleXM.

Our last tests with SPL and latest u-boot were unsuccessful! And we have to port ext2 support to it because we have no FAT partition.

Quoted 8 lines
Quoted 3 lines

Quote from an internal query I just did: "There shouldn't be a case where xM has memory that X-Loader works for that SPL did not.

The issue was that with SPL and proper upstream u-boot from ~fall last year, my beagleboard xm was unstable. It constantly crashed. So I reverted back to the old x-loader booting, as that kept things stable.

If you can try current U-Boot or provide more details about the instability I'd appreciate it.

Quoted 10 lines
Quoted 5 lines

There _may_ be a UART issue that needs work-arounding however. And of course if they used mainline they could pretty easily do RAW for SPL/U-Boot.img and then do everything else with ext2/3/4 and ignore FAT.

The "default" that we stuck with so far (though we can certainly change that) is to keep u-boot as a file in ext2, so that it can easily be updated. That maybe wasn't the most clever decision and going with raw is the way to go, but it's what we do today.

That's fine and a decent idea. I'd be happy to review patches to make this a clean option in SPL, even. A plus of moving to mainline would be that ext4 is supported now too.

- --
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/

iQIcBAEBAgAGBQJRSOK8AAoJENk4IS6UOR1WXc8QAJzBskxLej6HvMizXpG/g2ob YiYwGJnzoJ5lng1UReQKEMnVgwYIx1tLSzvq0Y0zxDIucgKkfnSJPajHgwEeAJAy mhVQTR2vPq6CZpqWSed/bY0uvr1z713gwlhDz6ep2pnPIHK0UTmNw6L0EuaKQ5tw CkFoEEhVBdfkqxtsheKVZmH33WgzSDad84ohdI6Lmgx3yMYshCRU2J5bZ8cwxu/6 rxQ45lS5TX3V6RfpyAHm20xk7NYNHewQagulZ4IOsFCN627+wYIDqAcNwplr4W3Z 97Izu0IILcH9i/ayiAKjbK6/TSO7GG4zvM5jXqRrfyHOBp5t9nle7HpT4AKaa07+ KwypNQdRKHmhlqCq3nqM7rz6S0ZeTku5rruTYo443B3Vk43saAplOBPpJgSfsRAO O6zsJe34fEMa1vy6IvZFul1cRC9n9yWrCANj3ip0pLcOE2s7DRjYWA+lrAKkwDNk tA2hEzdxd/jnlsm6PpAQ4liDmvTlSe8BzSuQhhalC+Mq5QnTvmQwmIPsRWooFjhs BjxCkfrtZkixNitxMB0Rax8ziGa3LWBpp2R70qoKhH1a9zQo2kVWzlS1GBB69aV+ DIQR/TmCfBH4IbXe+5itG70fCGUBx8amBHvzN4MXiuI3NY56hR2s2gUZLw5pA9HA 3yLW06fCHx93o54KLLRH
=HmdZ
-----END PGP SIGNATURE-----

#13 lore raw
Quoted 35 lines · Tom Rini
Quoted 34 lines · Alexander Graf
Quoted 30 lines · Nishanth Menon

Change in subject. Original thread start:
http://lists.opensuse.org/opensuse-arm/2013-03/msg00076.html

Quoted 17 lines · Guillaume Gardet

Le 19/03/2013 17:04, Nishanth Menon a ?crit :

Quoted 15 lines · gary
Quoted 14 lines

Just a FYI, here is the the boot text dumped to the serial port. It indicates a 1GHz max clock rate, but maybe that is just a "capability" of the board (as in a designation) and not a parameter that has been set.

I see in the boot text there is a way to interrupt the automatic boot, which I presume is a way to set parameters. Could someone give me what such a line would look like for forcing the mpurate?

--------------------------------------- Texas Instruments X-Loader 1.5.0 (Sep 8 2012 - 02:21:18) Beagle xM Reading boot sector Error: reading boot sector fat load failed, trying ext2 Loading u-boot.bin from mmc

Quoted 6 lines
Quoted 2 lines

Why are we still using old x-loader - we should be using SPL MLO from u-boot master - it works straight on beagleXM.

Our last tests with SPL and latest u-boot were unsuccessful! And we have to port ext2 support to it because we have no FAT partition.

Quote from an internal query I just did: "There shouldn't be a case where xM has memory that X-Loader works for that SPL did not.

Quoted 7 lines
Quoted 4 lines

The issue was that with SPL and proper upstream u-boot from ~fall last year, my beagleboard xm was unstable. It constantly crashed. So I reverted back to the old x-loader booting, as that kept things stable.

If you can try current U-Boot or provide more details about the instability I'd appreciate it.

Alrighty, we switched all images to upstream SPL now. Let's see what happens :).

Quoted 7 lines
Quoted 7 lines
Quoted 6 lines

There _may_ be a UART issue that needs work-arounding however. And of course if they used mainline they could pretty easily do RAW for SPL/U-Boot.img and then do everything else with ext2/3/4 and ignore FAT.

Quoted 8 lines
Quoted 4 lines

The "default" that we stuck with so far (though we can certainly change that) is to keep u-boot as a file in ext2, so that it can easily be updated. That maybe wasn't the most clever decision and going with raw is the way to go, but it's what we do today.

That's fine and a decent idea. I'd be happy to review patches to make this a clean option in SPL, even. A plus of moving to mainline would be that ext4 is supported now too.

Oh, with recent u-boot and the SPL approach for OMAP this already is a pretty clean option. You only need to enable the CMD defines and change the default bootcmd :).

Alex

#14 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 45 lines · Alexander Graf
Quoted 42 lines · Tom Rini
Quoted 40 lines · Alexander Graf
Quoted 26 lines · Nishanth Menon

Change in subject. Original thread start:
http://lists.opensuse.org/opensuse-arm/2013-03/msg00076.html

Quoted 22 lines · Guillaume Gardet

Le 19/03/2013 17:04, Nishanth Menon a ?crit :

Quoted 19 lines · gary
Quoted 10 lines

Just a FYI, here is the the boot text dumped to the serial port. It indicates a 1GHz max clock rate, but maybe that is just a "capability" of the board (as in a designation) and not a parameter that has been set.

I see in the boot text there is a way to interrupt the
automatic boot, which I presume is a way to set
parameters. Could someone give me what such a line would look like for forcing the mpurate?

Quoted 5 lines

--------------------------------------- Texas Instruments X-Loader 1.5.0 (Sep 8 2012 - 02:21:18) Beagle xM Reading boot sector Error: reading boot sector fat load failed, trying ext2 Loading u-boot.bin from mmc

Why are we still using old x-loader - we should be using SPL MLO from u-boot master - it works straight on beagleXM.

Quoted 6 lines
Quoted 3 lines

Our last tests with SPL and latest u-boot were unsuccessful! And we have to port ext2 support to it because we have no FAT partition.

Quote from an internal query I just did: "There shouldn't be a case where xM has memory that X-Loader works for that SPL did not.

The issue was that with SPL and proper upstream u-boot from ~fall last year, my beagleboard xm was unstable. It constantly crashed. So I reverted back to the old x-loader booting, as that kept things stable.

Quoted 5 lines
Quoted 2 lines

If you can try current U-Boot or provide more details about the instability I'd appreciate it.

Alrighty, we switched all images to upstream SPL now. Let's see what happens :).

Yay!

Quoted 11 lines
Quoted 11 lines
Quoted 10 lines
Quoted 4 lines

There _may_ be a UART issue that needs work-arounding however. And of course if they used mainline they could pretty easily do RAW for SPL/U-Boot.img and then do everything else with ext2/3/4 and ignore FAT.

The "default" that we stuck with so far (though we can certainly change that) is to keep u-boot as a file in ext2, so that it can easily be updated. That maybe wasn't the most clever decision and going with raw is the way to go, but it's what we do today.

Quoted 7 lines
Quoted 3 lines

That's fine and a decent idea. I'd be happy to review patches to make this a clean option in SPL, even. A plus of moving to mainline would be that ext4 is supported now too.

Oh, with recent u-boot and the SPL approach for OMAP this already is a pretty clean option. You only need to enable the CMD defines and change the default bootcmd :).

You should just be able to provide a uEnv.txt with your custom actual-boot command as uenvcmd. What CMD defines do you need? I'm quite open to enabling more as needed for real world cases.

- --
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/

iQIcBAEBAgAGBQJRjUGdAAoJENk4IS6UOR1W8nYP+gPArBP31donUe0TZfPsC0ef aHwe7shOJp6ZGWMeRii9wzkByYXo2MlFvNyYALEm7cl9PYmngCILuLpQDerhKTFZ G6CQbUSyYhENj5eWQJWZJwFfO58nfVdDTXYT6yFjLGMeZI7bE+khGFsAtounR5Ag XtNUfVbRh9KxS0SJ+kE2uYjfi/BmW2eru8L+Z4Em0jb+Od1HsOVqIlNUOKkb/XEo ZLNuAqRr20ysu3EwF9j0VLBjFNNuR+cGceWJZGRY8u+Xkd/3eCzIRs8m4Gge/ePn XqDEmQZpCeFxosYCfSvmLvp26rTUVZm8oCBTMfCWXOn1Mx9AMmbbg1jnPNENY3Xk ck8+Wy8AmZ+JVAi33v8otdmHeeXoTW4QGpL2ZnG45rOkGoRAxEgL75ARCAYFSEax nk+nvIu6+xnPm8af0UzW1FkO3qkYuId0Wr+WGIPkkGQJu2PthEFgTIY4+aIv+/x8 31pvXFXgVIFubCue47OzR6vBkqvoeK9ZSU0XmGgsEPgOksZ1xI4xs4/5pmDW94yF rmNlhG3mFRv1kiNkUCObXfNuhvSFQNhe/E56cquoHRzuE61rRtWn0dL5rBhKmruB e5QQG8PDuLcUuUqfrFA009qW0cqDFw38Aqobrm+R6LygPeWSpIBQarhCrpkkjKxO AyXKj8GUHAHJH0Kqu/HY
=GpkC
-----END PGP SIGNATURE-----

#15 lore raw

Am 10.05.2013 um 20:51 schrieb Tom Rini <[email protected]>:

Quoted 72 lines

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 45 lines · Alexander Graf
Quoted 42 lines · Tom Rini
Quoted 40 lines · Alexander Graf
Quoted 26 lines · Nishanth Menon

Change in subject. Original thread start:
http://lists.opensuse.org/opensuse-arm/2013-03/msg00076.html

Quoted 22 lines · Guillaume Gardet

Le 19/03/2013 17:04, Nishanth Menon a ?crit :

Quoted 19 lines · gary
Quoted 10 lines

Just a FYI, here is the the boot text dumped to the serial port. It indicates a 1GHz max clock rate, but maybe that is just a "capability" of the board (as in a designation) and not a parameter that has been set.

I see in the boot text there is a way to interrupt the automatic boot, which I presume is a way to set parameters. Could someone give me what such a line would look like for forcing the mpurate?

Quoted 5 lines

--------------------------------------- Texas Instruments X-Loader 1.5.0 (Sep 8 2012 - 02:21:18) Beagle xM Reading boot sector Error: reading boot sector fat load failed, trying ext2 Loading u-boot.bin from mmc

Why are we still using old x-loader - we should be using SPL MLO from u-boot master - it works straight on beagleXM.

Quoted 6 lines
Quoted 3 lines

Our last tests with SPL and latest u-boot were unsuccessful! And we have to port ext2 support to it because we have no FAT partition.

Quote from an internal query I just did: "There shouldn't be a case where xM has memory that X-Loader works for that SPL did not.

The issue was that with SPL and proper upstream u-boot from ~fall last year, my beagleboard xm was unstable. It constantly crashed. So I reverted back to the old x-loader booting, as that kept things stable.

Quoted 5 lines
Quoted 2 lines

If you can try current U-Boot or provide more details about the instability I'd appreciate it.

Alrighty, we switched all images to upstream SPL now. Let's see what happens :).

Yay!

Quoted 15 lines
Quoted 14 lines
Quoted 10 lines
Quoted 4 lines

There _may_ be a UART issue that needs work-arounding however. And of course if they used mainline they could pretty easily do RAW for SPL/U-Boot.img and then do everything else with ext2/3/4 and ignore FAT.

The "default" that we stuck with so far (though we can certainly change that) is to keep u-boot as a file in ext2, so that it can easily be updated. That maybe wasn't the most clever decision and going with raw is the way to go, but it's what we do today.

That's fine and a decent idea. I'd be happy to review patches to make this a clean option in SPL, even. A plus of moving to mainline would be that ext4 is supported now too.

Quoted 7 lines
Quoted 3 lines

Oh, with recent u-boot and the SPL approach for OMAP this already is a pretty clean option. You only need to enable the CMD defines and change the default bootcmd :).

You should just be able to provide a uEnv.txt with your custom actual-boot command as uenvcmd. What CMD defines do you need? I'm quite open to enabling more as needed for real world cases.

Well, that would make the situation on OMAP slightly better, but wouldn't help on other SoCs. I think we should rather try and get a reasonably unified boot environment up across the board first :).

Worst case I would only have to s/fat/ext2/g at a single spot then. Or enable dynamic fs detection and use the respective helpers at that one spot.

Alex

#16 lore raw

Dear Alexander,

Quoted 4 lines · In message <[email protected]> you wrote:

Well, that would make the situation on OMAP slightly better, but wouldn't help on other SoCs. I think we should rather try and get a reasonably unified boot environment up across the board first :).

Well, this all depends on which resources are available on the SoC in question. If all you have is 4 kB on chip memory, then you will not be able to load the file system code at all.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Always try to do things in chronological order; it's  less  confusing
that way.
#17 lore raw

Am 11.05.2013 um 02:08 schrieb Wolfgang Denk <[email protected]>:

Quoted 11 lines

Dear Alexander,

Quoted 4 lines · In message <[email protected]> you wrote:

Well, that would make the situation on OMAP slightly better, but wouldn't help on other SoCs. I think we should rather try and get a reasonably unified boot environment up across the board first :).

Well, this all depends on which resources are available on the SoC in question. If all you have is 4 kB on chip memory, then you will not be able to load the file system code at all.

Sure, and different boards also have different IO channels. But couldn't we define at least some tiers, with capable enough boards to run standard distros at least getting unified?

If you need to tailor the OS you want to execute there's little point in unifying the boot method for it. It's very valuable to have defaults across the board once you can run the same kernel and user space though.

Alex