3.8.4: ohci question
Hello,
When my dmesg gives me a growing number of lines like the one below, what is going on?
ohci_hcd 0000:00:12.0: urb ffff88023025c500 path 2 ep1in 6c160000 cc 6
--> status -71
Please let me know!
Kind regards,
Udo
[+cc linux-usb]
Quoted 17 lines · Udo van den Heuvel
Hello,
When my dmesg gives me a growing number of lines like the one below, what is going on?
ohci_hcd0000:00:12.0: urbffff88023025c500path 2 ep1in6c160000cc 6
--> status -71Please let me know!
Kind regards,
Udo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 12 lines · Bjorn Helgaas
[+cc linux-usb]
Quoted 9 lines · Udo van den Heuvel
Hello,
When my dmesg gives me a growing number of lines like the one below, what is going on?
ohci_hcd0000:00:12.0: urbffff88023025c500path 2 ep1in6c160000cc 6
--> status -71Please let me know!
-71 errors indicate a low-level problem on the USB bus. Generally it means that the device isn't sending any packets. Maybe the device's firmware has crashed or maybe it has been disconnected.
Alan Stern
Quoted 11 lines · Alan Stern
Quoted 7 lines
Quoted 7 lines
When my dmesg gives me a growing number of lines like the one below, what is going on?
ohci_hcd0000:00:12.0: urbffff88023025c500path 2 ep1in6c160000cc 6
--> status -71Please let me know!
-71 errors indicate a low-level problem on the USB bus. Generally it means that the device isn't sending any packets. Maybe the device's firmware has crashed or maybe it has been disconnected.
Could it be due to a defect in the mainboard?
Or the device connected to that port?
Kind regards,
Udo
Quoted 7 lines · Udo van den Heuvel
Quoted 6 lines · Alan Stern
Quoted 6 lines
Quoted 6 lines
When my dmesg gives me a growing number of lines like the one below, what is going on?
ohci_hcd0000:00:12.0: urbffff88023025c500path 2 ep1in6c160000cc 6
--> status -71
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
Quoted 1 line
Please let me know!
-71 errors indicate a low-level problem on the USB bus. Generally it means that the device isn't sending any packets. Maybe the device's firmware has crashed or maybe it has been disconnected.
Could it be due to a defect in the mainboard?
Or the device connected to that port?
Yes. Or it could be due to any number of other things. Do you want to post a complete dmesg log?
Alan Stern