Skip to contentSkip to conversation

ALSA: problems setting up usb devices using kernel 3.9.0-rc4+

DISCUSSION Florian Scholz 1 participant 1 message Apr 2, 2013

lore
Share & tools
lore
#0 lore raw

Sorry for the first message being HTML, I'm using the webmailer and the default setting is HTML and not TEXT

[florian@localhost ~]$ diff diff1.txt diff2.txt 476c476
< Bus 001 Device 005: ID 041e:30d7 Creative Technology, Ltd
---

Quoted 1 line

Bus 001 Device 007: ID 041e:30d7 Creative Technology, Ltd

I had problems to reproduce the error:

reboot -> it worked
shutdown and boot -> my old, beloved error (usb_set_interface_failed ...)

Quoted 1 line
Quoted 1 line
Quoted 1 line

Takashi Iwai 02.04.13 11.32 Uhr >>>

At Mon, 25 Mar 2013 22:53:02 +0100,

Quoted 20 lines · Florian Scholz

Hi Jarsolav and Takashi,

I'm experiencing some ALSA problems during the set up of my Creative X-Fi HD USB sound card and the device isn't in the device list. The kernel is 3.9.0-rc4+ (GIT)

...

[   39.949914] ALSA sound/usb/pcm.c:346 5:4:1: usb_set_interface failed (-32)
[   39.950291] ALSA sound/usb/pcm.c:346 5:4:1: usb_set_interface failed (-32)
[   39.950918] ALSA sound/usb/pcm.c:346 5:4:1: usb_set_interface failed (-32)
[   39.951292] ALSA sound/usb/pcm.c:346 5:4:1: usb_set_interface failed (-32)
[   39.951665] ALSA sound/usb/pcm.c:346 5:4:1: usb_set_interface failed (-32)
[   39.952056] ALSA sound/usb/pcm.c:346 5:4:1: usb_set_interface failed (-32)
[   39.952542] ALSA sound/usb/pcm.c:346 5:4:1: usb_set_interface failed (-32)
[   39.953294] ALSA sound/usb/pcm.c:346 5:4:1: usb_set_interface failed (-32)
[   39.953665] ALSA sound/usb/pcm.c:346 5:4:1: usb_set_interface failed (-32)
[   39.954047] ALSA sound/usb/pcm.c:346 5:4:1: usb_set_interface failed (-32)

...

But after a replug, the sound card works until the next reboot

Quoted 11 lines
[  274.487794] usb 1-1.5: USB disconnect, device number 5
[  275.432461] usb 1-1.5: new full-speed USB device number 6 using ehci-pci
[  275.520713] usb 1-1.5: New USB device found, idVendor=041e, idProduct=30d7
[  275.520718] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  275.520721] usb 1-1.5: Product: USB Sound Blaster HD
[  275.520724] usb 1-1.5: Manufacturer: Creative Technology
[  275.520726] usb 1-1.5: SerialNumber: 00000AFE
[  275.542566] ALSA sound/usb/mixer.c:932 2:0: cannot get min/max values for control 2 (id 2)
[  275.545621] input: Creative Technology USB Sound Blaster HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.5/input/input7
[  275.546064] hid-generic 0003:041E:30D7.0006: input,hidraw4: USB HID v1.11 Device [Creative Technology USB Sound Blaster HD] on usb-0000:00:1a.0-1.5/input5
[  277.909789] ALSA sound/usb/mixer.c:2263 status interrupt: c0 02

Do you see any difference in "lsusb -v" output before and after replug?

Takashi