Enable Realtek ALC671 Codec
PATCH 1/1 Enable Realtek ALC671 Codec
Hi,
working on a new mainboard generation with ALC671 codecs the first tests showed that the generic codec parser is just configuring the rear mic in for audio input, line-in and front-mic are missing.
I tried to understand the code of patch_realtek.c and after compiling with CONFIG_SND_DEBUG I saw that this module is not used at all for the ALC671 codec because its device-ID was missing.
So what I did is:
- adding the device id and assigned the ALC662 patches for it.
- Added the device id so that it enables 4 ports in alc662_parse_auto_config
- changed the conditional in alc_subsystem_id because it looked so strange to me when I tried to understand what is happening. :-)
Here is the patch:
sound/pci/hda/patch_realtek.c +1 -1
@@ -1283,7 +1283,7 @@ static int alc_subsystem_id(struct hda_codec *codec, } ass = codec->subsystem_id &0xffff ; -if ((ass != codec->bus->pci->subsystem_device) && (ass &1 )) +if ((ass == codec->bus->pci->subsystem_device) && (ass &1 )) goto do_sku;/* invalid SSID, check the special NID pin defcfg instead */
@@ -6663,7 +6663,8 @@ static int alc662_parse_auto_config(struct hda_codec *codec)const hda_nid_t *ssids; if (codec->vendor_id == 0x10ec0272 || codec->vendor_id ==
0x10ec0663 ||
- codec->vendor_id == 0x10ec0665 || codec->vendor_id == 0x10ec0670)
+ codec->vendor_id == 0x10ec0665 || codec->vendor_id == 0x10ec0670 ||
+ codec->vendor_id == 0x10ec0671)
ssids = alc663_ssids;
else
ssids = alc662_ssids;
@@ -7115,6 +7116,7 @@ static const struct hda_codec_preset snd_hda_preset_realtek[] = {
{ .id = 0x10ec0665, .name = "ALC665", .patch = patch_alc662 },
{ .id = 0x10ec0668, .name = "ALC668", .patch = patch_alc662 },
{ .id = 0x10ec0670, .name = "ALC670", .patch = patch_alc662 },
+ { .id = 0x10ec0671, .name = "ALC671", .patch = patch_alc662 },
{ .id = 0x10ec0680, .name = "ALC680", .patch = patch_alc680 },
{ .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
{ .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },Signature · 15 lines
Dipl.-Inf. (FH) Rainer Koenig Project Manager Linux Clients Dept. PDG WPS R&D SW OSE Fujitsu Technology Solutions Bürgermeister-Ullrich-Str. 100 86199 Augsburg Germany Telephone: +49-821-804-3321 Telefax: +49-821-804-2131 Mail: mailto:[email protected] Internet ts.fujtsu.com Company Details ts.fujitsu.com/imprint.html
At Wed, 03 Apr 2013 13:29:29 +0200,
Quoted 7 lines · Rainer Koenig
Hi,
working on a new mainboard generation with ALC671 codecs the first tests showed that the generic codec parser is just configuring the rear mic in for audio input, line-in and front-mic are missing.
Quoted 8 lines
I tried to understand the code of
patch_realtek.cand after compiling withCONFIG_SND_DEBUGI saw that this module is not used at all for the ALC671 codec because its device-ID was missing.So what I did is:
- adding the device id and assigned the ALC662 patches for it.
- Added the device id so that it enables 4 ports inalc662_parse_auto_config
These are fine to take, but
Quoted 2 lines
- changed the conditional in
alc_subsystem_idbecause it looked so strange to me when I tried to understand what is happening. :-)
... this isn't. You should try to understand harder :)
Takashi
Quoted 37 lines
Here is the patch:
Signed-off-by Rainer Koenig <[email protected]>sound/pci/hda/patch_realtek.c +1
-1@@ -1283,7 +1283,7 @@ static int alc_subsystem_id(struct hda_codec *codec, } ass = codec->subsystem_id &0xffff ; -if ((ass != codec->bus->pci->subsystem_device) && (ass &1 )) +if ((ass == codec->bus->pci->subsystem_device) && (ass &1 )) goto do_sku;/* invalid SSID, check the special NID pin defcfg instead */ @@ -6663,7 +6663,8 @@ static int alc662_parse_auto_config(struct hda_codec *codec)const hda_nid_t *ssids; if (codec->vendor_id == 0x10ec0272 || codec->vendor_id ==
0x10ec0663||
-codec->vendor_id==0x10ec0665||codec->vendor_id==0x10ec0670)
+codec->vendor_id==0x10ec0665||codec->vendor_id==0x10ec0670||sound/pci/hda/patch_realtek.c +2
-0+ codec->vendor_id == 0x10ec0671) ssids = alc663_ssids; else ssids = alc662_ssids;@@ -7115,6 +7116,7 @@ static const struct hda_codec_preset snd_hda_preset_realtek[] = { { .id = 0x10ec0665, .name = "ALC665", .patch = patch_alc662 }, { .id = 0x10ec0668, .name = "ALC668", .patch = patch_alc662 }, { .id = 0x10ec0670, .name = "ALC670", .patch = patch_alc662 }, + { .id = 0x10ec0671, .name = "ALC671", .patch = patch_alc662 }, { .id = 0x10ec0680, .name = "ALC680", .patch = patch_alc680 }, { .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
Quoted 24 lines
{ .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },Signature · 19 lines
Dipl.-Inf. (FH) Rainer Koenig Project Manager Linux Clients Dept. PDG WPS R&D SW OSE Fujitsu Technology Solutions Bürgermeister-Ullrich-Str. 100 86199 Augsburg Germany Telephone: +49-821-804-3321 Telefax: +49-821-804-2131 Mail: mailto:[email protected] Internet ts.fujtsu.com Company Details ts.fujitsu.com/imprint.html _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
At Wed, 03 Apr 2013 14:25:19 +0200,
Quoted 19 lines · Takashi Iwai
At Wed, 03 Apr 2013 13:29:29 +0200,
Quoted 7 lines · Rainer Koenig
Hi,
working on a new mainboard generation with ALC671 codecs the first tests showed that the generic codec parser is just configuring the rear mic in for audio input, line-in and front-mic are missing.
Quoted 8 lines
I tried to understand the code of
patch_realtek.cand after compiling withCONFIG_SND_DEBUGI saw that this module is not used at all for the ALC671 codec because its device-ID was missing.So what I did is:
- adding the device id and assigned the ALC662 patches for it.
- Added the device id so that it enables 4 ports inalc662_parse_auto_config
Quoted 6 lines
These are fine to take, but
Quoted 2 lines
- changed the conditional in
alc_subsystem_idbecause it looked so strange to me when I tried to understand what is happening. :-)... this isn't. You should try to understand harder :)
A hint to understand better is that Realtek tries to get its own config bits given by BIOS. The first place to check is the lower 16bit of codec SSID, and if this is different from the PCI SSID, it's supposed to be such a value and taken to retrieve some information. If it's same as PCI SSID, the pin config of some special pin is referred as an alternative configuration.
In anyway, could you resend your patch only with the addition of ALC671? Also, run scripts/checkpatch.pl and fix the issues before submission.
thanks,
Takashi
Quoted 58 lines
Takashi
Quoted 54 lines
Here is the patch:
Signed-off-by Rainer Koenig <[email protected]>sound/pci/hda/patch_realtek.c +1
-1@@ -1283,7 +1283,7 @@ static int alc_subsystem_id(struct hda_codec *codec, } ass = codec->subsystem_id &0xffff ; -if ((ass != codec->bus->pci->subsystem_device) && (ass &1 )) +if ((ass == codec->bus->pci->subsystem_device) && (ass &1 )) goto do_sku;/* invalid SSID, check the special NID pin defcfg instead */ @@ -6663,7 +6663,8 @@ static int alc662_parse_auto_config(struct hda_codec *codec)const hda_nid_t *ssids; if (codec->vendor_id == 0x10ec0272 || codec->vendor_id ==
0x10ec0663||
-codec->vendor_id==0x10ec0665||codec->vendor_id==0x10ec0670)
+codec->vendor_id==0x10ec0665||codec->vendor_id==0x10ec0670||sound/pci/hda/patch_realtek.c +2
-0+ codec->vendor_id == 0x10ec0671) ssids = alc663_ssids; else ssids = alc662_ssids;@@ -7115,6 +7116,7 @@ static const struct hda_codec_preset snd_hda_preset_realtek[] = { { .id = 0x10ec0665, .name = "ALC665", .patch = patch_alc662 }, { .id = 0x10ec0668, .name = "ALC668", .patch = patch_alc662 }, { .id = 0x10ec0670, .name = "ALC670", .patch = patch_alc662 }, + { .id = 0x10ec0671, .name = "ALC671", .patch = patch_alc662 }, { .id = 0x10ec0680, .name = "ALC680", .patch = patch_alc680 }, { .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },{ .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },Signature · 12 lines
Dipl.-Inf. (FH) Rainer Koenig Project Manager Linux Clients Dept. PDG WPS R&D SW OSE Fujitsu Technology Solutions Bürgermeister-Ullrich-Str. 100 86199 Augsburg Germany Telephone: +49-821-804-3321 Telefax: +49-821-804-2131 Mail: mailto:[email protected]
Quoted 7 lines
Quoted 7 lines
Internet ts.fujtsu.com
Company Details ts.fujitsu.com/imprint.html
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 4 lines · Takashi Iwai
Quoted 2 lines
- changed the conditional in
alc_subsystem_idbecause it looked so strange to me when I tried to understand what is happening. :-)... this isn't. You should try to understand harder :)
I'm really trying hard to understand. The original source says that
ass = codec->subsystem_id & 0xffff;
Masking out the lower 16bit of codecs subsytem-id in my case ass would be 11eb
if ((ass != codec->bus->pci->subsystem_device) && (ass & 1))
comparing ((11eb != 11eb) would fail so the whole if-construct fails and we don't do the next line that is
goto do_sku;
Instead we complain about an invalid subsystem-id...?
Really, that is somewhat difficult to understand. Why is the subsystem ID that I find in /proc/asound/card0/codec#2 and that matches the subsystem device that I can see with 'lspci -vn' invalid???
What stuff do I need to take to understand this? ;-)
Regards
Rainer
Signature · 19 lines
Dipl.-Inf. (FH) Rainer Koenig Project Manager Linux Clients Dept. PDG WPS R&D SW OSE Fujitsu Technology Solutions Bürgermeister-Ullrich-Str. 100 86199 Augsburg Germany Telephone: +49-821-804-3321 Telefax: +49-821-804-2131 Mail: mailto:[email protected] Internet ts.fujtsu.com Company Details ts.fujitsu.com/imprint.html _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Resend of the patch (as asked by Takashi Iwai):
sound/pci/hda/patch_realtek.c +3 -1
@@ -6663,7 +6663,8 @@ static int alc662_parse_auto_config(struct hda_codec *codec)const hda_nid_t *ssids;if (codec->vendor_id ==0x10ec0272 || codec->vendor_id ==0x10ec0663 || - codec->vendor_id ==0x10ec0665 || codec->vendor_id ==0x10ec0670 ) + codec->vendor_id ==0x10ec0665 || codec->vendor_id ==0x10ec0670 || + codec->vendor_id ==0x10ec0671 ) ssids = alc663_ssids;else ssids = alc662_ssids;
@@ -7115,6 +7116,7 @@ static const struct hda_codec_preset snd_hda_preset_realtek[] = { { .id = 0x10ec0665, .name = "ALC665", .patch = patch_alc662 }, { .id = 0x10ec0668, .name = "ALC668", .patch = patch_alc662 }, { .id = 0x10ec0670, .name = "ALC670", .patch = patch_alc662 }, + { .id = 0x10ec0671, .name = "ALC671", .patch = patch_alc662 }, { .id = 0x10ec0680, .name = "ALC680", .patch = patch_alc680 }, { .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 }, { .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },
Signature · 19 lines
Dipl.-Inf. (FH) Rainer Koenig Project Manager Linux Clients Dept. PDG WPS R&D SW OSE Fujitsu Technology Solutions Bürgermeister-Ullrich-Str. 100 86199 Augsburg Germany Telephone: +49-821-804-3321 Telefax: +49-821-804-2131 Mail: mailto:[email protected] Internet ts.fujtsu.com Company Details ts.fujitsu.com/imprint.html _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
At Wed, 03 Apr 2013 15:25:25 +0200,
Quoted 2 lines · Rainer Koenig
Resend of the patch (as asked by Takashi Iwai):
Keep the patch description. Resending a patch means to send a comprehensive patch that can be applied directly.
Also, check how other patches look like. Usually there are specific pattern of the subject line depending on the path.
And, last but not least, always give maintainers (in this case, me) to Cc when you submit a patch. Maintainers may overlook if it's sent only to ML.
thanks,
Takashi
Quoted 25 lines
Signed-off-by Rainer Koenig <[email protected]>sound/pci/hda/patch_realtek.c +2
-1@@ -6663,7 +6663,8 @@ static int alc662_parse_auto_config(struct hda_codec *codec)const hda_nid_t *ssids;if (codec->vendor_id ==0x10ec0272 || codec->vendor_id ==0x10ec0663 || - codec->vendor_id ==0x10ec0665 || codec->vendor_id ==0x10ec0670 ) + codec->vendor_id ==0x10ec0665 || codec->vendor_id ==0x10ec0670 || + codec->vendor_id ==0x10ec0671 ) ssids = alc663_ssids;else ssids = alc662_ssids;sound/pci/hda/patch_realtek.c +1
-0@@ -7115,6 +7116,7 @@ static const struct hda_codec_preset snd_hda_preset_realtek[] = { { .id = 0x10ec0665, .name = "ALC665", .patch = patch_alc662 }, { .id = 0x10ec0668, .name = "ALC668", .patch = patch_alc662 }, { .id = 0x10ec0670, .name = "ALC670", .patch = patch_alc662 }, + { .id = 0x10ec0671, .name = "ALC671", .patch = patch_alc662 }, { .id = 0x10ec0680, .name = "ALC680", .patch = patch_alc680 }, { .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
Quoted 24 lines
{ .id =
0x10ec0882, .name = "ALC882", .patch =patch_alc882},Signature · 19 lines
Dipl.-Inf. (FH) Rainer Koenig Project Manager Linux Clients Dept. PDG WPS R&D SW OSE Fujitsu Technology Solutions Bürgermeister-Ullrich-Str. 100 86199 Augsburg Germany Telephone: +49-821-804-3321 Telefax: +49-821-804-2131 Mail: mailto:[email protected] Internet ts.fujtsu.com Company Details ts.fujitsu.com/imprint.html _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel