GPS driver for Linux - kernel or user-space driver?
I've been approached by a developer at Sony who wants to publish an open source driver for a Sony GPS receiver module.
I've looked in the kernel source, and only see one standalone GPS driver, for Garmin. It appears that most GPS support in Linux is done via user-space drivers. Many GPS hardware modules appear to be accessed via a serial line, or USB/serial port. The Sony module is pretty much the same, accepting commands and delivering data via a uart from the chip.
I planning to recommend writing a user-space driver (based on gpsd and/or the Android GPS HAL specification). But I'm worried I'm missing something. Is this the correct approach, or is there an established kernel API for GPS modules - such that I should recommend that this developer writes a kernel module instead of, or in addition to, the user-space support for the hardware?
Thanks,
-- Tim
=============================
Tim Bird
Architecture Group Chair, CE Workgroup of the Linux Foundation Senior Staff Engineer, Sony Network Entertainment
=============================
Quoted 2 lines · Tim Bird
I've been approached by a developer at Sony who wants to publish an open source driver for a Sony GPS receiver module.
What does the device look like? USB device? UART? Something else?
Quoted 7 lines
I've looked in the kernel source, and only see one standalone GPS driver, for Garmin. It appears that most GPS support in Linux is done via user-space drivers. Many GPS hardware modules appear to be accessed via a serial line, or USB/serial port. The Sony module is pretty much the same, accepting commands and delivering data via a uart from the chip.
Quoted 6 lines
I planning to recommend writing a user-space driver (based on gpsd and/or the Android GPS HAL specification). But I'm worried I'm missing something. Is this the correct approach, or is there an established kernel API for GPS modules - such that I should recommend that this developer writes a kernel module instead of, or in addition to, the user-space support for the hardware?
If it's just a uart-like device, just write a serial driver and drive it from gpsd. That way seems to be the simplest and then the kernel just becomes a dumb-pipe, which is fine.
thanks,
greg k-h
Hi Greg,
Quoted 19 lines
Quoted 2 lines
I've been approached by a developer at Sony who wants to publish an open source driver for a Sony GPS receiver module.
What does the device look like? USB device? UART? Something else?
Quoted 7 lines
I've looked in the kernel source, and only see one standalone GPS driver, for Garmin. It appears that most GPS support in Linux is done via user-space drivers. Many GPS hardware modules appear to be accessed via a serial line, or USB/serial port. The Sony module is pretty much the same, accepting commands and delivering data via a uart from the chip.
Quoted 6 lines
I planning to recommend writing a user-space driver (based on gpsd and/or the Android GPS HAL specification). But I'm worried I'm missing something. Is this the correct approach, or is there an established kernel API for GPS modules - such that I should recommend that this developer writes a kernel module instead of, or in addition to, the user-space support for the hardware?
Quoted 3 lines
If it's just a uart-like device, just write a serial driver and drive it from gpsd. That way seems to be the simplest and then the kernel just becomes a dumb-pipe, which is fine.
the one thing that still bugs me is that detecting an UART with GPS functionality behind it is extremely bad experience. If we could get something like DEVTYPE=gps support for the TTY layer, that would be helpful.
Regards
Marcel
Quoted 21 lines · Marcel Holtmann
Hi Greg,
Quoted 19 lines
Quoted 2 lines
I've been approached by a developer at Sony who wants to publish an open source driver for a Sony GPS receiver module.
What does the device look like? USB device? UART? Something else?
Quoted 13 lines
I've looked in the kernel source, and only see one standalone GPS driver, for Garmin. It appears that most GPS support in Linux is done via user-space drivers. Many GPS hardware modules appear to be accessed via a serial line, or USB/serial port. The Sony module is pretty much the same, accepting commands and delivering data via a uart from the chip.
I planning to recommend writing a user-space driver (based on gpsd and/or the Android GPS HAL specification). But I'm worried I'm missing something. Is this the correct approach, or is there an established kernel API for GPS modules - such that I should recommend that this developer writes a kernel module instead of, or in addition to, the user-space support for the hardware?
Quoted 8 lines
Quoted 3 lines
If it's just a uart-like device, just write a serial driver and drive it from gpsd. That way seems to be the simplest and then the kernel just becomes a dumb-pipe, which is fine.
the one thing that still bugs me is that detecting an UART with GPS functionality behind it is extremely bad experience. If we could get something like DEVTYPE=gps support for the TTY layer, that would be helpful.
I would love that, but there's tons of USB gps devices that we don't know if they are a USB serial device, or a GPS device as the device id is the same (companies just embed a usb to serial chip in their devices.)
So, someone has to guess, right now it's userspace.
Unless you have a better idea?
thanks,
greg k-h
Hi Greg,
Quoted 28 lines
Quoted 19 lines
Quoted 19 lines
Quoted 2 lines
I've been approached by a developer at Sony who wants to publish an open source driver for a Sony GPS receiver module.
What does the device look like? USB device? UART? Something else?
Quoted 13 lines
I've looked in the kernel source, and only see one standalone GPS driver, for Garmin. It appears that most GPS support in Linux is done via user-space drivers. Many GPS hardware modules appear to be accessed via a serial line, or USB/serial port. The Sony module is pretty much the same, accepting commands and delivering data via a uart from the chip.
I planning to recommend writing a user-space driver (based on gpsd and/or the Android GPS HAL specification). But I'm worried I'm missing something. Is this the correct approach, or is there an established kernel API for GPS modules - such that I should recommend that this developer writes a kernel module instead of, or in addition to, the user-space support for the hardware?
Quoted 8 lines
Quoted 3 lines
If it's just a uart-like device, just write a serial driver and drive it from gpsd. That way seems to be the simplest and then the kernel just becomes a dumb-pipe, which is fine.
the one thing that still bugs me is that detecting an UART with GPS functionality behind it is extremely bad experience. If we could get something like DEVTYPE=gps support for the TTY layer, that would be helpful.
Quoted 8 lines
I would love that, but there's tons of USB gps devices that we don't know if they are a USB serial device, or a GPS device as the device id is the same (companies just embed a usb to serial chip in their devices.)
So, someone has to guess, right now it's userspace.
Unless you have a better idea?
we could at least try to fix the good ones where we have proper vendor and product IDs dedicated for these devices. Or where things can be labeled through device tree or some similar methods. The less guess work userspace has to do, the smooth the experience will be.
Regards
Marcel
Quoted 35 lines · Marcel Holtmann
Hi Greg,
Quoted 33 lines
Quoted 19 lines
Quoted 19 lines
Quoted 2 lines
I've been approached by a developer at Sony who wants to publish an open source driver for a Sony GPS receiver module.
What does the device look like? USB device? UART? Something else?
Quoted 13 lines
I've looked in the kernel source, and only see one standalone GPS driver, for Garmin. It appears that most GPS support in Linux is done via user-space drivers. Many GPS hardware modules appear to be accessed via a serial line, or USB/serial port. The Sony module is pretty much the same, accepting commands and delivering data via a uart from the chip.
I planning to recommend writing a user-space driver (based on gpsd and/or the Android GPS HAL specification). But I'm worried I'm missing something. Is this the correct approach, or is there an established kernel API for GPS modules - such that I should recommend that this developer writes a kernel module instead of, or in addition to, the user-space support for the hardware?
Quoted 8 lines
Quoted 3 lines
If it's just a uart-like device, just write a serial driver and drive it from gpsd. That way seems to be the simplest and then the kernel just becomes a dumb-pipe, which is fine.
the one thing that still bugs me is that detecting an UART with GPS functionality behind it is extremely bad experience. If we could get something like DEVTYPE=gps support for the TTY layer, that would be helpful.
I would love that, but there's tons of USB gps devices that we don't know if they are a USB serial device, or a GPS device as the device id is the same (companies just embed a usb to serial chip in their devices.)
Quoted 8 lines
Quoted 3 lines
So, someone has to guess, right now it's userspace.
Unless you have a better idea?
we could at least try to fix the good ones where we have proper vendor and product IDs dedicated for these devices. Or where things can be labeled through device tree or some similar methods. The less guess work userspace has to do, the smooth the experience will be.
Sure, but right now, that list is already in userspace, right? Moving it to the kernel wouldn't help much as the tools would have to handle both looking at what the kernel says, and their old userspace table.
Anyway, if someone wants to send me a patch adding this to the kernel, I will not object...
thanks,
greg k-h
(Adding Lv, he has been working on this).
Quoted 35 lines · Marcel Holtmann
Hi Greg,
Quoted 33 lines
Quoted 19 lines
Quoted 19 lines
Quoted 2 lines
I've been approached by a developer at Sony who wants to publish an open source driver for a Sony GPS receiver module.
What does the device look like? USB device? UART? Something else?
Quoted 13 lines
I've looked in the kernel source, and only see one standalone GPS driver, for Garmin. It appears that most GPS support in Linux is done via user-space drivers. Many GPS hardware modules appear to be accessed via a serial line, or USB/serial port. The Sony module is pretty much the same, accepting commands and delivering data via a uart from the chip.
I planning to recommend writing a user-space driver (based on gpsd and/or the Android GPS HAL specification). But I'm worried I'm missing something. Is this the correct approach, or is there an established kernel API for GPS modules - such that I should recommend that this developer writes a kernel module instead of, or in addition to, the user-space support for the hardware?
Quoted 8 lines
Quoted 3 lines
If it's just a uart-like device, just write a serial driver and drive it from gpsd. That way seems to be the simplest and then the kernel just becomes a dumb-pipe, which is fine.
the one thing that still bugs me is that detecting an UART with GPS functionality behind it is extremely bad experience. If we could get something like DEVTYPE=gps support for the TTY layer, that would be helpful.
I would love that, but there's tons of USB gps devices that we don't know if they are a USB serial device, or a GPS device as the device id is the same (companies just embed a usb to serial chip in their devices.)
Quoted 8 lines
Quoted 3 lines
So, someone has to guess, right now it's userspace.
Unless you have a better idea?
we could at least try to fix the good ones where we have proper vendor and product IDs dedicated for these devices. Or where things can be labeled through device tree or some similar methods. The less guess work userspace has to do, the smooth the experience will be.
There is one attempt to do this in case of ACPI here:
http://www.spinics.net/lists/linux-acpi/msg42951.html
Basically it adds a new sysfs attribute "peripheral_type" which then has the ACPI modalias for the device behind UART. That should help userspace to find out which device it is. The same attribute should work with DeviceTree as well.