budget.c SAA7146 / BSRU6 additional SAT CARD support

Committer: Peter Wiese <[email protected]>

modified: drivers/media/pci/ttpci/budget.c

added support for Philips Semiconductor (now NXP) SAA7146 reference design DVB Sat card, using ALPS BSRU6 tuner 3 changes in budget.c driver to enable proper detection of the card and load the tuner driver

---

By making a contribution to this project, I certify that:

(a) The contribution was created in whole or in part by me and I have the right to submit it under the open source license indicated in the file; or

(b) The contribution is based upon previous work that, to the best of my knowledge, is covered under an appropriate open source license and I have the right under that license to submit that work with modifications, whether created in whole or in part by me, under the same open source license (unless I am permitted to submit under a different license), as indicated in the file; or

(c) The contribution was provided directly to me by some other person who certified (a), (b) or (c) and I have not modified it.

(d) I understand and agree that this project and the contribution are public and that a record of the contribution (including all personal information I submit with it, including my sign-off) is maintained indefinitely and may be redistributed consistent with this project or the open source license(s) involved.

---

index 7e6e43a..2a03bf0 100644
@@ -13,6 +13,9 @@
  *           Oliver Endriss <[email protected]> and
  *           Andreas 'randy' Weinberger
  *
+ * 02mar2013 Support for Philips Semiconductors Sylt SAA7146 cards (Alps tuner)
+ *           Peter Wiese <[email protected]>
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2

@@ -537,6 +540,16 @@ static void frontend_init(struct budget *budget)
         }
         break;
 
+    case 0x4f52: /* Cards based on Philips Semi Sylt PCI ref. design */
+        budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap);
+        if (budget->dvb_frontend) {
+            printk(KERN_INFO "budget: tuner ALPS BSRU6 in Philips Semi. Sylt detected\n");
+            budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
+            budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
+            break;
+        }
+        break;
+
     case 0x4f60: /* Fujitsu Siemens Activy Budget-S PCI rev AL 

(stv0299/tsa5059) */

     {
         int subtype = i2c_readreg(&budget->i2c_adap, 0x50, 0x67);

@@ -818,6 +831,7 @@ MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps front
MAKE_BUDGET_INFO(fsact, "Fujitsu Siemens Activy Budget-T PCI (rev
GR/Grundig frontend)", BUDGET_FS_ACTIVY);
MAKE_BUDGET_INFO(fsact1, "Fujitsu Siemens Activy Budget-T PCI (rev
AL/ALPS TDHD1-204A)", BUDGET_FS_ACTIVY);
MAKE_BUDGET_INFO(omicom, "Omicom S2 PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(sylt, "Philips Semi Sylt PCI", BUDGET_TT_HW_DISEQC);

 static struct pci_device_id pci_tbl[] = {
     MAKE_EXTENSION_PCI(ttbs,  0x13c2, 0x1003),
@@ -832,6 +846,7 @@ static struct pci_device_id pci_tbl[] = {
     MAKE_EXTENSION_PCI(fsact1, 0x1131, 0x5f60),
     MAKE_EXTENSION_PCI(fsact, 0x1131, 0x5f61),
     MAKE_EXTENSION_PCI(omicom, 0x14c4, 0x1020),
+    MAKE_EXTENSION_PCI(sylt, 0x1131, 0x4f52),
     {
         .vendor    = 0,
     }