devel-samsung for v3.10

GIT PULL Kukjin Kim 4 participants 5 messages Apr 8, 2013 – Apr 9, 2013 Arm Samsung Exynos

lore

Share & tools

lore

Kukjin Kim

author

2013-04-08 18:20 UTC #0 lore raw

The following changes since commit 6dbe51c251a327e012439c4772097a13df43c5b8:

Linux 3.9-rc1 (2013-03-03 15:11:05 -0800)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/devel-samsung-for-v3.10

for you to fetch changes up to 298591f89fd0f3f779a77e589ce2f1c28e9788ed:

ARM: EXYNOS: replace cpumask by the corresponding macro (2013-04-09
00:44:35 +0900)

----------------------------------------------------------------
including various development for samsung for v3.10

----------------------------------------------------------------
Charles Keepax (2):
ARM: S3C64XX: Clear DMA flags on channel request
ARM: S3C64XX: Slow down mic detection rate for wm5102

Daniel Lezcano (3):
ARM: EXYNOS: factor out the idle states
ARM: EXYNOS: handle properly the return values
ARM: EXYNOS: replace cpumask by the corresponding macro

Inderpal Singh (2):
ARM: EXYNOS: Add support for rtc wakeup
ARM: SAMSUNG: check processor type before cache restoration in resume

Jonathan Kliegman (2):
ARM: EXYNOS: Remove hardcode wakeup unmask for EINT_0
ARM: EXYNOS: Clear ENABLE_WAKEUP_SW bit when entering suspend

Sylwester Nawrocki (2):
ARM: SAMSUNG: Export MIPI CSIS/DSIM PHY control functions
ARM: S3C24XX: Correct NR_IRQS definition for s3c2440

  arch/arm/mach-exynos/common.c                |  2 +
  arch/arm/mach-exynos/cpuidle.c               | 58 
+++++++++++++---------------
  arch/arm/mach-exynos/include/mach/pm-core.h  |  9 +----
  arch/arm/mach-s3c24xx/include/mach/irqs.h    |  4 +-
  arch/arm/mach-s3c64xx/dma.c                  |  1 +
  arch/arm/mach-s3c64xx/mach-crag6410-module.c |  1 +
  arch/arm/plat-samsung/s5p-sleep.S            |  9 +++++
  arch/arm/plat-samsung/setup-mipiphy.c        |  3 ++
  8 files changed, 45 insertions(+), 42 deletions(-)

Signature · 7 lines

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.

Sylwester Nawrocki

2013-04-08 20:10 UTC #1 lore raw

Quoted 32 lines · Kukjin Kim

The following changes since commit 6dbe51c251a327e012439c4772097a13df43c5b8:
Linux 3.9-rc1 (2013-03-03 15:11:05 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/devel-samsung-for-v3.10
for you to fetch changes up to 298591f89fd0f3f779a77e589ce2f1c28e9788ed:
ARM: EXYNOS: replace cpumask by the corresponding macro (2013-04-09 00:44:35 +0900)
----------------------------------------------------------------
including various development for samsung for v3.10
----------------------------------------------------------------
Charles Keepax (2):
ARM: S3C64XX: Clear DMA flags on channel request
ARM: S3C64XX: Slow down mic detection rate for wm5102
Daniel Lezcano (3):
ARM: EXYNOS: factor out the idle states
ARM: EXYNOS: handle properly the return values
ARM: EXYNOS: replace cpumask by the corresponding macro
Inderpal Singh (2):
ARM: EXYNOS: Add support for rtc wakeup
ARM: SAMSUNG: check processor type before cache restoration in resume

Quoted 6 lines

Jonathan Kliegman (2):
ARM: EXYNOS: Remove hardcode wakeup unmask for EINT_0
ARM: EXYNOS: Clear ENABLE_WAKEUP_SW bit when entering suspend
Sylwester Nawrocki (2):
ARM: SAMSUNG: Export MIPI CSIS/DSIM PHY control functions

This one was supposed to be a fix for 3.8-rc IIRC. But anyway the whole file this patch touches is going to be removed in 3.11.

Quoted 1 line

ARM: S3C24XX: Correct NR_IRQS definition for s3c2440

And this one is needed for 3.9, sorry for not mentioning it in the patch's description. Together with [1] it makes my s3c2440 SoC based test board booting again with 3.9-rc6.

[1] http://www.spinics.net/lists/arm-kernel/msg236643.html

Thanks,
Sylwester

Kukjin Kim

author

2013-04-09 11:20 UTC #2 lore raw

Sylwester Nawrocki wrote:

[...]

Quoted 4 lines

Quoted 2 lines
Sylwester Nawrocki (2):
ARM: SAMSUNG: Export MIPI CSIS/DSIM PHY control functions
This one was supposed to be a fix for 3.8-rc IIRC. But anyway the whole

If so, this should be sent to stable 3.8 tree, but I'm not sure this is really bug fix.

Quoted 2 lines

file this patch touches is going to be removed in 3.11.

It means it is still needed for v3.10 :-)

Quoted 8 lines

Quoted 1 line
ARM: S3C24XX: Correct NR_IRQS definition for s3c2440
And this one is needed for 3.9, sorry for not mentioning it in the patch's description. Together with [1] it makes my s3c2440 SoC based test board booting again with 3.9-rc6.
[1] http://www.spinics.net/lists/arm-kernel/msg236643.html

OK, let me drop it in this branch.

Arnd and Olof, please hold on pulling for this branch. I will sort out soon.

Thanks.

- Kukjin

Sylwester Nawrocki

2013-04-09 12:09 UTC #3 lore raw

Quoted 11 lines · Kukjin Kim

Sylwester Nawrocki wrote:
[...]
Quoted 4 lines
Quoted 2 lines
Sylwester Nawrocki (2):
ARM: SAMSUNG: Export MIPI CSIS/DSIM PHY control functions
This one was supposed to be a fix for 3.8-rc IIRC. But anyway the whole
If so, this should be sent to stable 3.8 tree, but I'm not sure this is really bug fix.

It prevents build error when MIPI-CSIS driver is build as a loadable module. That means with some valid kernel configuration the kernel cannot be build. Hence IMHO it is a bug fix, and sending it to 3.8+ stable indeed seems a good idea.

Quoted 3 lines

Quoted 2 lines
file this patch touches is going to be removed in 3.11.
It means it is still needed for v3.10 :-)

Yeah, true. :) Just wanted to note that I have already some RFC patches for the MIPI CSI-2/DSI DPHY driver using the generic PHY framework. However this framework is not settled yet, I assume it would be completed for 3.11.

Quoted 9 lines

Quoted 8 lines
Quoted 1 line
ARM: S3C24XX: Correct NR_IRQS definition for s3c2440
And this one is needed for 3.9, sorry for not mentioning it in the patch's description. Together with [1] it makes my s3c2440 SoC based test board booting again with 3.9-rc6.
[1] http://www.spinics.net/lists/arm-kernel/msg236643.html
OK, let me drop it in this branch.

Thanks!

Quoted 5 lines

Arnd and Olof, please hold on pulling for this branch. I will sort out soon.
Thanks.
- Kukjin

Regards,
Sylwester

Kukjin Kim

2013-04-09 15:32 UTC #4 lore raw

Quoted 10 lines · Sylwester Nawrocki

Quoted 9 lines · Kukjin Kim
Sylwester Nawrocki wrote:
[...]
Quoted 4 lines
Quoted 2 lines
Sylwester Nawrocki (2):
ARM: SAMSUNG: Export MIPI CSIS/DSIM PHY control functions
This one was supposed to be a fix for 3.8-rc IIRC. But anyway the whole

Quoted 8 lines

Quoted 2 lines
If so, this should be sent to stable 3.8 tree, but I'm not sure this is really bug fix.
It prevents build error when MIPI-CSIS driver is build as a loadable module. That means with some valid kernel configuration the kernel cannot be build. Hence IMHO it is a bug fix, and sending it to 3.8+ stable indeed seems a good idea.

OK.

Quoted 9 lines

Quoted 3 lines
Quoted 2 lines
file this patch touches is going to be removed in 3.11.
It means it is still needed for v3.10 :-)
Yeah, true. :) Just wanted to note that I have already some RFC patches for the MIPI CSI-2/DSI DPHY driver using the generic PHY framework. However this framework is not settled yet, I assume it would be completed for 3.11.

I see.

Quoted 6 lines

Quoted 6 lines
Quoted 6 lines
Quoted 1 line
ARM: S3C24XX: Correct NR_IRQS definition for s3c2440
And this one is needed for 3.9, sorry for not mentioning it in the patch's description. Together with [1] it makes my s3c2440 SoC based test board booting again with 3.9-rc6.

Quoted 6 lines

Quoted 3 lines
Quoted 2 lines
[1] http://www.spinics.net/lists/arm-kernel/msg236643.html
OK, let me drop it in this branch.
Thanks!

You're welcome :-)

Quoted 2 lines

Quoted 2 lines
Arnd and Olof, please hold on pulling for this branch. I will sort out soon.

I re-sent pull-request instead of this.

Thanks.

- Kukjin