Skip to contentSkip to conversation

OMAP5: I2C: Set I2C_BUS_MAX to 5 to enable I2C4 and I2C5

PATCH New Lubomir Popov 1 participant 1 message Apr 9, 2013 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH v4 3/3 OMAP5: I2C: Set I2C_BUS_MAX to 5 to enable I2C4 and I2C5

I2C4 and I2C5 are utilized on all known OMAP5 hardware platforms. In order to be able to select one of these buses however, I2C_BUS_MAX has to be set to 5; do this here.

Please note that for working bus selection, a fix to the i2c driver is required as well (subject of a separate patch).

---
Changes since V3:
Added detailed commit messages.

Changes since V2:
Separate patches consolidated into a series.

Changes since V1:
Fixed line wrap issues.

 arch/arm/include/asm/arch-omap5/i2c.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/include/asm/arch-omap5/i2c.h +1 -1
index 68be03b..ec39a53 100644
@@ -23,7 +23,7 @@
 #ifndef _OMAP5_I2C_H_
 #define _OMAP5_I2C_H_
 
-#define I2C_BUS_MAX	3
+#define I2C_BUS_MAX	5
 #define I2C_DEFAULT_BASE	I2C_BASE1
 
 struct i2c {
Signature · 1 line
1.7.9.5