Skip to contentSkip to conversation

How could I record the information when kernel panic.

DISCUSSION disnoir 2 participants 3 messages Apr 24, 2013 – Apr 27, 2013

lore
Share & tools
lore

disnoir

author
#0 lore raw

There is a random probability that cause the kernel panic (debian with kernel 3.2.41), when I execute:
"sudo umount /media/data /media/big".

Things are like this:

I use "udisks --mount /dev/sda3" to mount "data" which is a ntfs filesystem. similarly, I use "udisks --mount /dev/wd5000bpvt/big" to mount "big" which is a ext4 filesystem.

After finish using these filesystems, I use "sudo umount /media/data /media/big" to umount the filesystems, and the hole system just suddenly halt (mouse is not moving).

using alt-sysrq-b to reboot the system. nothing record in the /var/log/messages.

So, How could I record the kernel error/info, when system was halt ?

Thanks a lot!

--
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#1 lore raw
Quoted 1 line · disnoir

So, How could I record the kernel error/info, when system was halt ?

Your best bet is to use one of the following:
0) Use sysrq to investigate a bit:
https://www.kernel.org/doc/Documentation/sysrq.txt
1) Hook a serial console up if your system has one to another system with a null modem cable and console=ttyS0,<baud> passed in to the kernel at boot
2) Try netconsole if you don't have a serial console:
https://www.kernel.org/doc/Documentation/networking/netconsole.txt

I would recommend trying a newer kernel and see if your bug is fixed. If it is you could bisect down to the commit that fixes it and let the debian kernel maintainers know.

Good luck,

Brandon
--
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

author
#2 lore raw
Quoted 11 lines · Brandon Philips
Quoted 1 line · disnoir

So, How could I record the kernel error/info, when system was halt ?

Your best bet is to use one of the following:
0) Use sysrq to investigate a bit:
https://www.kernel.org/doc/Documentation/sysrq.txt
1) Hook a serial console up if your system has one to another system with a null modem cable and console=ttyS0,<baud> passed in to the kernel at boot
2) Try netconsole if you don't have a serial console:
https://www.kernel.org/doc/Documentation/networking/netconsole.txt

Quoted 7 lines

I would recommend trying a newer kernel and see if your bug is fixed. If it is you could bisect down to the commit that fixes it and let the debian kernel maintainers know.

Good luck,

Brandon

Thank you for your reply.
I use ttyUSB0 to record the dmesg, cause this is a notebook (asus-k42je), which has no serial port, so I use a serial-port-to-USB-convertor. I found that if I add console=ttyUSB0,115200n8 to kernel parameter, the kernel will fail to boot, and also without any information. so I get into system on normal configuration (without console=...), and modify rsyslog.conf to log kernel info to /dev/ttyUSB0. That works, use another pc to watch that serial port, all the information in dmesg will show in that serial port either. But, when I test that if will also work during the kernel-panic ( I try "echo c > /proc/sysrq-trigger" ), nothing record into serial. I guess kernel crash will cause rsyslogd no working.
So I use kdump-tools, kexec-tools to record a kernel dump, and this could work even on kernel-panic.
Now, I just need to wait the problem happen again.

:-)

disnoir
--
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs