Kernel Firmware Support
Looking for method to best support users firmware needs within the kernel.
Have a disk-image project that users kernel.org kernels, and have had users that require firmware that is not included in the kernel.org source. I've been able to find it in linux-firmware.git and then manually adding it to the kernel.org firmware directory and then modifying the Makefile.
Had seen something that was suppose to be working on getting firmware out of the kernel, but that process seems to have been dormant for some time.
+----------------------------------------------------------+ Michael D. Setzer II - Computer Science Instructor Guam Community College Computer Center mailto:[email protected]
mailto:[email protected]
http://www.guam.net/home/mikes
Guam - Where America's Day Begins
G4L Disk Imaging Project maintainer
http://sourceforge.net/projects/g4l/
+----------------------------------------------------------+
http://setiathome.berkeley.edu (Original)
Number of Seti Units Returned: 19,471 Processing time: 32 years, 290 days, 12 hours, 58 minutes
(Total Hours: 287,489)
BOINC@HOME CREDITS
SETI 14672667.574611 | EINSTEIN 11160884.209852 ROSETTA 7189167.439443 | ABC 15954188.106838
Quoted 8 lines · Michael D. Setzer II
Looking for method to best support users firmware needs within the kernel.
Have a disk-image project that users kernel.org kernels, and have had users that require firmware that is not included in the kernel.org source. I've been able to find it in linux-firmware.git and then manually adding it to the kernel.org firmware directory and then modifying the
Makefile.
Use the linux-firmware package, all of the distros package it up for you automatically, and install it in the correct place, so it should "just work".
What is failing for you when you use the firmware package?
thanks,
greg k-h
On 6 May 2013 at 19:47, Greg KH wrote:
Date sent: Mon, 6 May 2013 19:47:50 -0700 From: Greg KH <[email protected]> To: "Michael D. Setzer II" <[email protected]> Copies to: [email protected] Subject: Re: Kernel Firmware Support
Quoted 10 lines · Michael D. Setzer II
Quoted 8 lines
Looking for method to best support users firmware needs within the kernel.
Have a disk-image project that users kernel.org kernels, and have had users that require firmware that is not included in the kernel.org source. I've been able to find it in linux-firmware.git and then manually adding it to the kernel.org firmware directory and then modifying the
Makefile.
Quoted 6 lines
Use the linux-firmware package, all of the distros package it up for you automatically, and install it in the correct place, so it should "just work".
What is failing for you when you use the firmware package?
First, Thanks for the quick reply. The problem is this isn't using a distro build. My project (G4L) uses a number of kernels from kernel.org and I try to include as many of the nic and other devices in the kernel to make it support hardware that is outside my control. I've had users with bnx2x hardware that requires firmware that is not part of the kernel.org source code, and have manuaully added it by putting the .fw file in the subdirectory of firmware and modifying the Makefile. Then building the kernel includes that additional firmware in the about 8M kernel file that the user selects from the CD boot process.
The ideal is to be able to boot from the cd, or load the kernel with its filesystem to be able to do partition or disk image backups, but it must be able to use the hardware to access the disks and in most cases the nic. Without the firmware these bnx2x nics don't work.
For awhile I've been manually adding these two firmwares ./bnx2x/bnx2x-e2-7.2.51.0.fw ./bnx2/bnx2-mips-09-6.2.1b.fw
But yesterday, I got a message from a different user with screen captures that showed failure of loading the firmware below. Actually, one screen shot with the 7.0.23.0 and another with the 7.0.29.0. Wasn't sure, so I had added all three of th 7.0.x group to a test build of my kernels. Is only the latest needed?
./bnx2x/bnx2x-e1h-7.0.23.0.fw
./bnx2x/bnx2x-e1h-7.0.29.0.fw
./bnx2x/bnx2x-e1h-7.0.20.0.fw
I don't have access to any hardware with these bnx2? devices, so have to get feedback from users. The previous additions of firmware solved the problems, but just looking for the best way to solve it.
Thanks again.
Quoted 3 lines
thanks,
greg k-h
+----------------------------------------------------------+ Michael D. Setzer II - Computer Science Instructor Guam Community College Computer Center mailto:[email protected]
mailto:[email protected]
http://www.guam.net/home/mikes
Guam - Where America's Day Begins
G4L Disk Imaging Project maintainer
http://sourceforge.net/projects/g4l/
+----------------------------------------------------------+
http://setiathome.berkeley.edu (Original)
Number of Seti Units Returned: 19,471 Processing time: 32 years, 290 days, 12 hours, 58 minutes
(Total Hours: 287,489)
BOINC@HOME CREDITS
SETI 14672667.574611 | EINSTEIN 11160884.209852 ROSETTA 7189167.439443 | ABC 15954188.106838
Quoted 52 lines · Michael D. Setzer II
On 6 May 2013 at 19:47, Greg KH wrote:
Date sent: Mon, 6 May 2013 19:47:50 -0700 From: Greg KH <[email protected]> To: "Michael D. Setzer II" <[email protected]> Copies to: [email protected] Subject: Re: Kernel Firmware SupportQuoted 10 lines · Michael D. Setzer II
Quoted 8 lines
Looking for method to best support users firmware needs within the kernel.
Have a disk-image project that users kernel.org kernels, and have had users that require firmware that is not included in the kernel.org source. I've been able to find it in linux-firmware.git and then manually adding it to the kernel.org firmware directory and then modifying the
Makefile.Quoted 6 lines
Use the linux-firmware package, all of the distros package it up for you automatically, and install it in the correct place, so it should "just work".
What is failing for you when you use the firmware package?
First, Thanks for the quick reply. The problem is this isn't using a distro build. My project (G4L) uses a number of kernels from kernel.org and I try to include as many of the nic and other devices in the kernel to make it support hardware that is outside my control. I've had users with bnx2x hardware that requires firmware that is not part of the kernel.org source code, and have manuaully added it by putting the .fw file in the subdirectory of firmware and modifying the
Makefile. Then building the kernel includes that additional firmware in the about 8M kernel file that the user selects from the CD boot process.The ideal is to be able to boot from the cd, or load the kernel with its filesystem to be able to do partition or disk image backups, but it must be able to use the hardware to access the disks and in most cases the nic. Without the firmware these bnx2x nics don't work.
For awhile I've been manually adding these two firmwares ./bnx2x/bnx2x-e2-7.2.51.0.fw ./bnx2/bnx2-mips-09-6.2.1b.fw
But yesterday, I got a message from a different user with screen captures that showed failure of loading the firmware below. Actually, one screen shot with the 7.0.23.0 and another with the 7.0.29.0. Wasn't sure, so I had added all three of th 7.0.x group to a test build of my kernels. Is only the latest needed?
Quoted 3 lines
./bnx2x/bnx2x-e1h-7.0.23.0.fw
./bnx2x/bnx2x-e1h-7.0.29.0.fw
./bnx2x/bnx2x-e1h-7.0.20.0.fw
If you are supporting multiple versions of the kernel, that need different versions of the firmware package, then you need to include all of these to handle that properly.
Best of luck,
greg k-h
On 7 May 2013 at 10:20, Greg KH wrote:
Date sent: Tue, 7 May 2013 10:20:10 -0700 From: Greg KH <[email protected]> To: "Michael D. Setzer II" <[email protected]> Copies to: [email protected] Subject: Re: Kernel Firmware Support
Quoted 57 lines · Michael D. Setzer II
Quoted 52 lines · Greg KH
Date sent: Mon, 6 May 2013 19:47:50 -0700 From: Greg KH <[email protected]> To: "Michael D. Setzer II" <[email protected]> Copies to: [email protected] Subject: Re: Kernel Firmware SupportQuoted 10 lines · Michael D. Setzer II
Quoted 8 lines
Looking for method to best support users firmware needs within the kernel.
Have a disk-image project that users kernel.org kernels, and have had users that require firmware that is not included in the kernel.org source. I've been able to find it in linux-firmware.git and then manually adding it to the kernel.org firmware directory and then modifying the
Makefile.Quoted 6 lines
Use the linux-firmware package, all of the distros package it up for you automatically, and install it in the correct place, so it should "just work".
What is failing for you when you use the firmware package?
First, Thanks for the quick reply. The problem is this isn't using a distro build. My project (G4L) uses a number of kernels from kernel.org and I try to include as many of the nic and other devices in the kernel to make it support hardware that is outside my control. I've had users with bnx2x hardware that requires firmware that is not part of the kernel.org source code, and have manuaully added it by putting the .fw file in the subdirectory of firmware and modifying the
Makefile. Then building the kernel includes that additional firmware in the about 8M kernel file that the user selects from the CD boot process.The ideal is to be able to boot from the cd, or load the kernel with its filesystem to be able to do partition or disk image backups, but it must be able to use the hardware to access the disks and in most cases the nic. Without the firmware these bnx2x nics don't work.
For awhile I've been manually adding these two firmwares ./bnx2x/bnx2x-e2-7.2.51.0.fw ./bnx2/bnx2-mips-09-6.2.1b.fw
But yesterday, I got a message from a different user with screen captures that showed failure of loading the firmware below. Actually, one screen shot with the 7.0.23.0 and another with the 7.0.29.0. Wasn't sure, so I had added all three of th 7.0.x group to a test build of my kernels. Is only the latest needed?
Quoted 3 lines
./bnx2x/bnx2x-e1h-7.0.23.0.fw
./bnx2x/bnx2x-e1h-7.0.29.0.fw
./bnx2x/bnx2x-e1h-7.0.20.0.fw
Quoted 5 lines
If you are supporting multiple versions of the kernel, that need different versions of the firmware package, then you need to include all of these to handle that properly.
Best of luck,
Unfortuantely, that didn't fix the problem. For some reason, when this user booted the system, it came up with a different firmware listing. This time it was a 7.8 version.
So, I went thru the trouble of adding all of the firmware from the bnx2x to the 3.8.12 kernel, but it increases the kernel size from about 8.7M to 12.5M.
So added all of these, and this then worked.
bnx2x-e1-6.0.34.0.fw
bnx2x-e1-6.2.5.0.fw
bnx2x-e1-6.2.9.0.fw
bnx2x-e1-7.0.20.0.fw
bnx2x-e1-7.0.23.0.fw
bnx2x-e1-7.0.29.0.fw
bnx2x-e1-7.2.16.0.fw
bnx2x-e1-7.2.51.0.fw
bnx2x-e1-7.8.17.0.fw
bnx2x-e1-7.8.2.0.fw
bnx2x-e1h-6.0.34.0.fw
bnx2x-e1h-6.2.5.0.fw
bnx2x-e1h-6.2.9.0.fw
bnx2x-e1h-7.0.20.0.fw
bnx2x-e1h-7.0.23.0.fw
bnx2x-e1h-7.0.29.0.fw
bnx2x-e1h-7.2.16.0.fw
bnx2x-e1h-7.2.51.0.fw
bnx2x-e1h-7.8.17.0.fw
bnx2x-e1h-7.8.2.0.fw
bnx2x-e2-6.0.34.0.fw
bnx2x-e2-6.2.5.0.fw
bnx2x-e2-6.2.9.0.fw
bnx2x-e2-7.0.20.0.fw
bnx2x-e2-7.0.23.0.fw
bnx2x-e2-7.0.29.0.fw
bnx2x-e2-7.2.16.0.fw
bnx2x-e2-7.2.51.0.fw
bnx2x-e2-7.8.17.0.fw
bnx2x-e2-7.8.2.0.fw
But since I include about 8 kernels on the cd image, add all these to all the kernels would add about 32M.
In the past, I had tried to add one set to the filesystem all the kernels load, but it then didn't find the firmware at all, so went back to build the 3 firmwares into the kernels.
Know of any documentation on setup firmware that might have the info on how to do it.
Thanks again.
Quoted 2 lines
greg k-h
+----------------------------------------------------------+ Michael D. Setzer II - Computer Science Instructor Guam Community College Computer Center mailto:[email protected]
mailto:[email protected]
http://www.guam.net/home/mikes
Guam - Where America's Day Begins
G4L Disk Imaging Project maintainer
http://sourceforge.net/projects/g4l/
+----------------------------------------------------------+
http://setiathome.berkeley.edu (Original)
Number of Seti Units Returned: 19,471 Processing time: 32 years, 290 days, 12 hours, 58 minutes
(Total Hours: 287,489)
BOINC@HOME CREDITS
SETI 14715813.284302 | EINSTEIN 11214099.389852 ROSETTA 7221087.578604 | ABC 15958460.564726
Quoted 6 lines · Greg KH
Quoted 6 lines
But yesterday, I got a message from a different user with screen captures that showed failure of loading the firmware below. Actually, one screen shot with the 7.0.23.0 and another with the 7.0.29.0. Wasn't sure, so I had added all three of th 7.0.x group to a test build of my kernels. Is only the latest needed?
Quoted 7 lines
Quoted 3 lines
./bnx2x/bnx2x-e1h-7.0.23.0.fw
./bnx2x/bnx2x-e1h-7.0.29.0.fw
./bnx2x/bnx2x-e1h-7.0.20.0.fwIf you are supporting multiple versions of the kernel, that need different versions of the firmware package, then you need to include all of these to handle that properly.
The linux-firmware tree should include them all, hopefully. We don't intentionally *remove* old stuff, since that would break old kernels.
Eventually we'll want a way for people to filter out firmware which is only used by old kernels, when they install or package linux-firmware. But for now you just get everything.
Signature · 2 lines
David Woodhouse Open Source Technology Centre [email protected] Intel Corporation