Skip to contentSkip to conversation

Problems building yocto for Xilinx ML507 (with some tentative fixes)

DISCUSSION Andrea Sterbini 2 participants 5 messages May 10, 2013 – May 11, 2013

lore
Share & tools
lore
#0 lore raw

Hi
I have just bought an old Xilinx ML507 and I am trying to build yocto, but I find some problems building the minimal image I am a yocto newbie ... thus I wonder if I am missing something important.

My setup: Linux Fedora 18 64 bits

I hope I am following the correct procedure:

Quoted 5 lines

git clone git://git.yoctoproject.org/poky
cd poky
git clone git://git.yoctoproject.org/meta-xilinx -b master-xilinx-ml507-gcc-4.7 meta-xilinx git clone git://git.openembedded.org/meta-openembedded
. oe-init-build-env

My bblayers contains

Quoted 9 lines

BBLAYERS ?= " \
/home/andrea/src/FPGA/poky/meta \
/home/andrea/src/FPGA/poky/meta-yocto \
/home/andrea/src/FPGA/poky/meta-yocto-bsp \
/home/andrea/src/FPGA/poky/meta-openembedded/toolchain-layer \
/home/andrea/src/FPGA/poky/meta-openembedded-contrib/toolchain-layer \
/home/andrea/src/FPGA/poky/meta-xilinx \
/home/andrea/src/FPGA/poky/meta-angstrom \
"

My local.conf contains

Quoted 35 lines

BB_NUMBER_THREADS = "4"
PARALLEL_MAKE = "-j 4"

XILINX_LOC ?= "/opt/Xilinx/13.3/ISE_DS"

MACHINE ?= "virtex-5-ml507-powerpc-440"

XILINX_BSP_PATH ?= "/home/andrea/src/FPGA/poky-ml507/xilinx-ml507-updated" XILINX_BOARD ?= "ml507"

INHERIT += "rm_work"

PREFERRED_VERSION_libffi = "3.0.13"
PREFERRED_VERSION_libffi-native = "3.0.13"

MACHINE ??= "qemux86"

DISTRO ?= "poky"

PACKAGE_CLASSES ?= "package_rpm"

EXTRA_IMAGE_FEATURES = "debug-tweaks"

USER_CLASSES ?= "buildstats image-mklibs image-prelink"

PATCHRESOLVE = "noop"

BB_DISKMON_DIRS = "\
    STOPTASKS,${TMPDIR},1G,100K \
    STOPTASKS,${DL_DIR},1G,100K \
    STOPTASKS,${SSTATE_DIR},1G,100K \
    ABORT,${TMPDIR},100M,1K \
    ABORT,${DL_DIR},100M,1K \
    ABORT,${SSTATE_DIR},100M,1K"
Quoted 1 line

CONF_VERSION = "1"

The problems I have found (and someway fixed) are:

1) when I do "bitbake meta-toolchain" I get an error complaining that the compiler is not able to build for powerpc with FPU
Fix: I have changed the ml507 rules to include just the soft FPU

Quoted 9 lines
conf/machine/virtex-5-ml507-powerpc-440.conf +0 -0
index d44fc87..d268919 100644
@@ -5,7 +5,8 @@
 #@DESCRIPTION: Machine configuration for the Xilinx ML507 FPGA 

development platform with a Virtex-5 PowerPC 440 processor (with APU FPU).

include conf/machine/include/virtex-5/virtex-5-base.inc

conf/machine/virtex-5-ml507-powerpc-440.conf

Quoted 6 lines
conf/machine/virtex-5-ml507-powerpc-440.conf +2 -1
-include conf/machine/include/tune-ppc440e.inc
+#AS include conf/machine/include/tune-ppc440e.inc
+include conf/machine/include/tune-ppc440.inc
 
 # Specify linux kernel devicetree
 KERNEL_DEVICETREE = "${S}/arch/powerpc/boot/dts/virtex440-ml507.dts"

2) the libffi library version "3.0.12" has a small bug (a misplaced #ifndef), which is fixed in version "3.0.13"
Fix: I have added to my local.conf

Quoted 2 lines

PREFERRED_VERSION_libffi = "3.0.13"
PREFERRED_VERSION_libffi-native = "3.0.13"

This way the toolchain compiles properly

When I try "bitbake core-image-minimal" I get 2 problems:

1) the Xilinx git repository has moved from git.xilinx.com to github.com/Xilinx
Fix: I have changed the links in u-boot and linux-xilinx

Quoted 57 lines
recipes-bsp/u-boot/u-boot-xilinx_2012.10.bb +0 -1
@@ -12,7 +12,7 @@ PR = "r01"
 
 # U-Boot source location
 KBRANCH = "master"
-SRC_URI = 

"git://git.xilinx.com/u-boot-xlnx.git;branch=${KBRANCH};protocol=git" +SRC_URI = "git://github.com/Xilinx/u-boot-xlnx.git;branch=${KBRANCH};protocol=git"

S = "${WORKDIR}/git"

recipes-kernel/linux/linux-xilinx_3.3.bb +1 -1
index d803676..76c1edd 100644
@@ -18,7 +18,7 @@ SRCREV = "1e92da8e3a66b051766b1be57be67e2bff11e19d"
 PR = "r02"
 
 KBRANCH = "master"
-SRC_URI = 
 "git://git.xilinx.com/linux-xlnx.git;protocol=git;branch=${KBRANCH} \
+SRC_URI = 
 "git://github.com/Xilinx/linux-xlnx.git;protocol=git;branch=${KBRANCH} \
 file://0001-Xilinx-Update-IP-Core-support-for-Xilinx-ISE-14.1.patch \

file://0002-virtex440-ml507.dts-Update-device-tree-file-using-Xi.patch \
file://0003-xilinxfb-Fix-regression-in-call-to-XPS-TFT-controlle.patch \

recipes-kernel/linux/linux-xilinx_3.6.bb +1 -1
index 5d529a6..b7d2904 100644
@@ -17,7 +17,7 @@ SRCREV = "04d9378881401e71f83b8b4fea0abd71d33b4052"
 PR = "r02"
 
 KBRANCH = "master"
-SRC_URI = 
 "git://git.xilinx.com/linux-xlnx.git;protocol=git;branch=${KBRANCH} \
+SRC_URI = 
 "git://github.com/Xilinx/linux-xlnx.git;protocol=git;branch=${KBRANCH} \
            file://defconfig \
            "

# Apply machine specific patches.

recipes-kernel/linux/linux-xilinx_git.bb +1 -1
index 1800183..32351f7 100644
@@ -18,7 +18,7 @@ PV = "${LINUX_VERSION}+git-${SRCREV}"
 PR = "r18"
 
 KBRANCH = "master-next"
-SRC_URI = 
 "git://git.xilinx.com/linux-xlnx.git;protocol=git;branch=${KBRANCH} \
+SRC_URI = 
 "git://github.com/Xilinx/linux-xlnx.git;protocol=git;branch=${KBRANCH} \
            file://defconfig"
Quoted 2 lines

FILESPATH = "${@base_set_filespath([
'${FILE_DIRNAME}/${PN}/${SOC_FAMILY}' ], d)}"

2) bitbake complains about the license missing from the u-boot recipe
3) I have troubles also with the git.denx.de repository, which I can easily clone by hand but not by bitbake
Fix: I have added the required variables at the end (and fixed the git links)

Quoted 52 lines
recipes-bsp/u-boot/u-boot-xilinx_git.bb +1 -1
index 2ae1ec3..7a4a394 100644
@@ -4,6 +4,7 @@ require recipes-bsp/u-boot/u-boot.inc
 DEFAULT_PREFERENCE = "-1"
 
 PR = "r17"
+
 PV_virtex-5   = "v2012.04.01"
 PV_microblaze = "v2012.10"
 PV_zynq-7     = "v2012.10"
@@ -16,19 +17,27 @@ FILESPATH = "${@base_set_filespath([ 
 '${FILE_DIRNAME}/${PN}/${SOC_FAMILY}' ], d)
 
 # Virtex-5 src location
 KBRANCH_virtex-5 = "master"
-SRC_URI_virtex-5 = 

"git://git.denx.de/u-boot.git;branch=${KBRANCH};protocol=git"

recipes-bsp/u-boot/u-boot-xilinx_git.bb +1 -1
-SRCREV_virtex-5 = "415d386877df49eb051b85ef74fa59a16dc17c7d"
+#SRC_URI_virtex-5 = 

"git://git.denx.de/u-boot.git;branch=${KBRANCH};protocol=git"

recipes-bsp/u-boot/u-boot-xilinx_git.bb +2 -0
+#SRCREV_virtex-5 = "415d386877df49eb051b85ef74fa59a16dc17c7d"
+SRC_URI_virtex-5 = 

"git://github.com/Xilinx/u-boot-xlnx.git;branch=${KBRANCH};protocol=git"

recipes-bsp/u-boot/u-boot-xilinx_git.bb +1 -1
+SRCREV_virtex-5 = "26786228acfdc0a02190a8d9ca9fcca51a5dcf28"
 
 # Spartan-6 src location
 KBRANCH_spartan-6 = "master"
-SRC_URI_spartan-6 = 

"git://git.xilinx.com/u-boot-xlnx.git;branch=${KBRANCH};protocol=git" +SRC_URI_spartan-6 = "git://github.com/Xilinx/u-boot-xlnx.git;branch=${KBRANCH};protocol=git"
SRCREV_spartan-6 = "26786228acfdc0a02190a8d9ca9fcca51a5dcf28"

# Zynq-7 src location
KBRANCH_zynq-7 = "master"
-SRC_URI_zynq-7 = "git://git.xilinx.com/u-boot-xlnx.git;branch=${KBRANCH};protocol=git" +SRC_URI_zynq-7 = "git://github.com/Xilinx/u-boot-xlnx.git;branch=${KBRANCH};protocol=git"
SRCREV_zynq-7 = "26786228acfdc0a02190a8d9ca9fcca51a5dcf28"

recipes-bsp/u-boot/u-boot-xilinx_git.bb +6 -0
+PV                = "${PV_${SOC_FAMILY}}"
+LIC_FILES_CHKSUM  = "${LIC_FILES_CHKSUM_${SOC_FAMILY}}"
+KBRANCH           = "${KBRANCH_${SOC_FAMILY}}"
+SRC_URI           = "${SRC_URI_${SOC_FAMILY}}"
+SRCREV            = "${SRCREV_${SOC_FAMILY}}"
+
 XILINX_BOARD ?= "${@find_board(bb.data.getVar('XILINX_BSP_PATH', d, 

1), d)}"

Quoted 1 line

S = "${WORKDIR}/git"

There still some problems which stop my build ...
I will get them to you in a following email

All the best
AndreaS

#1 lore raw

Hi Andrea,

Quoted 4 lines · Andrea Sterbini

The problems I have found (and someway fixed) are:

1) when I do "bitbake meta-toolchain" I get an error complaining that the compiler is not able to build for powerpc with FPU
Fix: I have changed the ml507 rules to include just the soft FPU

I never did get soft-float to work properly with gcc-4.6 or gcc-4.7. I got soft-float to work with gcc-4.5.4.

hard float fpu support worked with gcc-4.7.

Were you able to boot and login to the command prompt with the generated images ?

Best regards,

Elvis Dowson

#2 lore raw

Not yet.
I haven't been able to complete the complete run

bitbake core-image-minimal

I moved to the meta-xilinx master branch
I am able to complete almost 1600 tasks of 1666 by doing (after the git.xilinx.com -> github.com/Xilinx fixes)

bitbake core-image-minimal -k

The error I get is

Quoted 17 lines

Build Configuration:

BB_VERSION        = "1.19.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Fedora-18"
TARGET_SYS        = "powerpc-poky-linux"
MACHINE           = "virtex-5-ml507-powerpc-440"
DISTRO            = "poky"
DISTRO_VERSION    = "1.3+snapshot-20130510"
TUNE_FEATURES     = "m32 ppc440 fpu-soft"
TARGET_FPU        = "soft"
meta
meta-yocto
meta-yocto-bsp    = "master:88a7b041fbf2583472aa9408a33dd8881223a0c1"
toolchain-layer   = "master:cc0067dc0c7ea469057238db6422864d1bce311c"
toolchain-layer   = "master:cd5f284730a6430d563443786c409aa6783d4b04"
meta-xilinx       = "master:4f1a74f86c402e0810e84ab0588b5de2ca9ccfff"
meta-angstrom     = "master:fe82cbd08eef51cd5d5a38c1cd0ed6ce7e57fb18"

--- a lot of diagnostic messages later

Quoted 28 lines

ERROR: Function failed: do_configure (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130 for further information)
ERROR: Logfile of failure stored in: /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130 Log data follows:

| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: Executing shell function do_configure
| NOTE: Replacing xparameters header to match hardware model
| /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/run.do_configure.10130: line 157: /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/git/board/xilinx/ml507/xparameters.h: Not a directory
| ERROR: Function failed: do_configure (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130 for further information)

ERROR: Task 79 (/home/andrea/src/FPGA/poky/meta-xilinx/recipes-bsp/u-boot/u-boot-xilinx_git.bb, do_configure) failed with exit code '1'
ERROR: Function failed: do_compile (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129 for further information)
ERROR: Logfile of failure stored in: /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129 Log data follows:

| DEBUG: Executing shell function do_compile
| NOTE: make -j 4 uImage CC=powerpc-poky-linux-gcc LD=powerpc-poky-linux-ld.bfd
| scripts/kconfig/conf --silentoldconfig Kconfig
| ***
| *** Configuration file ".config" not found!
| ***
| *** Please run some configurator (e.g. "make oldconfig" or
| *** "make menuconfig" or "make xconfig").
| ***
| make[2]: *** [silentoldconfig] Error 1
| make[1]: *** [silentoldconfig] Error 2
| make: *** No rule to make target `include/config/auto.conf', needed by `include/config/kernel.release'.  Stop.
| make: *** Waiting for unfinished jobs....
| ERROR: oe_runmake failed
| ERROR: Function failed: do_compile (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129 for further information)
Quoted 8 lines

ERROR: Task 811 (/home/andrea/src/FPGA/poky/meta-xilinx/recipes-kernel/linux/linux-xilinx_3.3.bb, do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1662 tasks of which 1660 didn't need to be rerun and 2 failed.
Waiting for 0 running tasks to finish:

Summary: 2 tasks failed:
/home/andrea/src/FPGA/poky/meta-xilinx/recipes-bsp/u-boot/u-boot-xilinx_git.bb, do_configure /home/andrea/src/FPGA/poky/meta-xilinx/recipes-kernel/linux/linux-xilinx_3.3.bb, do_compile
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.

All the best
Andrea

Quoted 21 lines · Elvis Dowson

Hi Andrea,

Quoted 5 lines · Andrea Sterbini

The problems I have found (and someway fixed) are:

1) when I do "bitbake meta-toolchain" I get an error complaining that the compiler is not able to build for powerpc with FPU
Fix: I have changed the ml507 rules to include just the soft FPU

I never did get soft-float to work properly with gcc-4.6 or gcc-4.7. I got soft-float to work with gcc-4.5.4.

hard float fpu support worked with gcc-4.7.

Were you able to boot and login to the command prompt with the generated images ?

Best regards,

Elvis Dowson

#3 lore raw

Found why that error
| /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/run.do_configure.10130: line 157: /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/git/board/xilinx/ml507/xparameters.h: Not a directory

The u-boot downloaded from github.com/Xilinx has no board/xilinx/ml507/ directory but only a board/xilinx/ppc440-generic Now I will try the original from git://git.denx.de/u-boot.git
(but bitbake seems to have problems fetching it)

A

Quoted 126 lines · Andrea Sterbini

Not yet.
I haven't been able to complete the complete run

bitbake core-image-minimal

I moved to the meta-xilinx master branch
I am able to complete almost 1600 tasks of 1666 by doing (after the git.xilinx.com -> github.com/Xilinx fixes)

bitbake core-image-minimal -k

The error I get is

Quoted 17 lines

Build Configuration:

BB_VERSION        = "1.19.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Fedora-18"
TARGET_SYS        = "powerpc-poky-linux"
MACHINE           = "virtex-5-ml507-powerpc-440"
DISTRO            = "poky"
DISTRO_VERSION    = "1.3+snapshot-20130510"
TUNE_FEATURES     = "m32 ppc440 fpu-soft"
TARGET_FPU        = "soft"
meta
meta-yocto
meta-yocto-bsp    = "master:88a7b041fbf2583472aa9408a33dd8881223a0c1"
toolchain-layer   = "master:cc0067dc0c7ea469057238db6422864d1bce311c"
toolchain-layer   = "master:cd5f284730a6430d563443786c409aa6783d4b04"
meta-xilinx       = "master:4f1a74f86c402e0810e84ab0588b5de2ca9ccfff"
meta-angstrom     = "master:fe82cbd08eef51cd5d5a38c1cd0ed6ce7e57fb18"

--- a lot of diagnostic messages later

Quoted 55 lines

ERROR: Function failed: do_configure (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130 for further information)
ERROR: Logfile of failure stored in:
/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130

Log data follows:

| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: Executing shell function do_configure
| NOTE: Replacing xparameters header to match hardware model
|

/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/run.do_configure.10130:
line 157:
/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/git/board/xilinx/ml507/xparameters.h:
Not a directory
| ERROR: Function failed: do_configure (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130 for further information)
ERROR: Task 79
(/home/andrea/src/FPGA/poky/meta-xilinx/recipes-bsp/u-boot/u-boot-xilinx_git.bb,
do_configure) failed with exit code '1'
ERROR: Function failed: do_compile (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129 for further information)
ERROR: Logfile of failure stored in:
/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129

Log data follows:
| DEBUG: Executing shell function do_compile | NOTE: make -j 4 uImage CC=powerpc-poky-linux-gcc LD=powerpc-poky-linux-ld.bfd

| scripts/kconfig/conf --silentoldconfig Kconfig
| ***
| *** Configuration file ".config" not found!
| ***
| *** Please run some configurator (e.g. "make oldconfig" or
| *** "make menuconfig" or "make xconfig").
| ***
| make[2]: *** [silentoldconfig] Error 1
| make[1]: *** [silentoldconfig] Error 2
| make: *** No rule to make target `include/config/auto.conf', needed
by `include/config/kernel.release'.  Stop.
| make: *** Waiting for unfinished jobs....
| ERROR: oe_runmake failed
| ERROR: Function failed: do_compile (see

/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129 for further information)
ERROR: Task 811
(/home/andrea/src/FPGA/poky/meta-xilinx/recipes-kernel/linux/linux-xilinx_3.3.bb,
do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1662 tasks of which 1660 didn't need
to be rerun and 2 failed.
Waiting for 0 running tasks to finish:

Quoted 7 lines

Summary: 2 tasks failed:
/home/andrea/src/FPGA/poky/meta-xilinx/recipes-bsp/u-boot/u-boot-xilinx_git.bb, do_configure /home/andrea/src/FPGA/poky/meta-xilinx/recipes-kernel/linux/linux-xilinx_3.3.bb, do_compile
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.

All the best
Andrea

Quoted 25 lines · Elvis Dowson

Hi Andrea,

Quoted 6 lines · Andrea Sterbini

The problems I have found (and someway fixed) are:

1) when I do "bitbake meta-toolchain" I get an error complaining that the compiler is not able to build for powerpc with FPU
Fix: I have changed the ml507 rules to include just the soft FPU

I never did get soft-float to work properly with gcc-4.6 or gcc-4.7. I got soft-float to work with gcc-4.5.4.

hard float fpu support worked with gcc-4.7.

Were you able to boot and login to the command prompt with the generated images ?

Best regards,

Elvis Dowson

#4 lore raw

Updates

1) I was wrong with git.xilinx.com and git.denx.de not working ... it's just a HUGE download that took forever ... I have reverted my changes
2) I have been able to compile u-boot-xilinx (after some trial-error to generate the proper xparameters.h with XPS/XSDK, e.g. the FLASH memory is required)

A small fix was needed to complete u-boot-xilinx compilation ... I had to add #include "xparameters.h"
to the file
board/xilinx/ppc440-generic/xilinx_ppc440_generic.c

3) I have been able to compile linux-xilinx,
but first I had to copy the file defconfig as linux-xilinx/3.3-r02/git/.config

Now core-image-minimal is done and I am going to try it (as soon I find how to build the ace)

All the best
AndreaS

Quoted 155 lines · Andrea Sterbini

Found why that error
| /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/run.do_configure.10130:
line 157:
/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/git/board/xilinx/ml507/xparameters.h:
Not a directory

The u-boot downloaded from github.com/Xilinx has no board/xilinx/ml507/ directory but only a board/xilinx/ppc440-generic Now I will try the original from git://git.denx.de/u-boot.git
(but bitbake seems to have problems fetching it)

A

Quoted 138 lines · Andrea Sterbini

Not yet.
I haven't been able to complete the complete run

bitbake core-image-minimal

I moved to the meta-xilinx master branch
I am able to complete almost 1600 tasks of 1666 by doing (after the git.xilinx.com -> github.com/Xilinx fixes)

bitbake core-image-minimal -k

The error I get is

Quoted 17 lines

Build Configuration:

BB_VERSION        = "1.19.0"
BUILD_SYS         = "x86_64-linux"
NATIVELSBSTRING   = "Fedora-18"
TARGET_SYS        = "powerpc-poky-linux"
MACHINE           = "virtex-5-ml507-powerpc-440"
DISTRO            = "poky"
DISTRO_VERSION    = "1.3+snapshot-20130510"
TUNE_FEATURES     = "m32 ppc440 fpu-soft"
TARGET_FPU        = "soft"
meta
meta-yocto
meta-yocto-bsp    = "master:88a7b041fbf2583472aa9408a33dd8881223a0c1"
toolchain-layer   = "master:cc0067dc0c7ea469057238db6422864d1bce311c"
toolchain-layer   = "master:cd5f284730a6430d563443786c409aa6783d4b04"
meta-xilinx       = "master:4f1a74f86c402e0810e84ab0588b5de2ca9ccfff"
meta-angstrom     = "master:fe82cbd08eef51cd5d5a38c1cd0ed6ce7e57fb18"

--- a lot of diagnostic messages later

Quoted 68 lines

ERROR: Function failed: do_configure (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130

for further information)
ERROR: Logfile of failure stored in:
/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130

Log data follows:

| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: Executing shell function do_configure
| NOTE: Replacing xparameters header to match hardware model
|

/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/run.do_configure.10130:

line 157:
/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/git/board/xilinx/ml507/xparameters.h:

Not a directory
| ERROR: Function failed: do_configure (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/u-boot-xilinx/v2012.04.01-r17/temp/log.do_configure.10130

for further information)
ERROR: Task 79 (/home/andrea/src/FPGA/poky/meta-xilinx/recipes-bsp/u-boot/u-boot-xilinx_git.bb,

do_configure) failed with exit code '1'
ERROR: Function failed: do_compile (see /home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129

for further information)
ERROR: Logfile of failure stored in:
/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129

Log data follows:
| DEBUG: Executing shell function do_compile | NOTE: make -j 4 uImage CC=powerpc-poky-linux-gcc LD=powerpc-poky-linux-ld.bfd

| scripts/kconfig/conf --silentoldconfig Kconfig
| ***
| *** Configuration file ".config" not found!
| ***
| *** Please run some configurator (e.g. "make oldconfig" or
| *** "make menuconfig" or "make xconfig").
| ***
| make[2]: *** [silentoldconfig] Error 1
| make[1]: *** [silentoldconfig] Error 2
| make: *** No rule to make target `include/config/auto.conf', needed
by `include/config/kernel.release'.  Stop.
| make: *** Waiting for unfinished jobs....
| ERROR: oe_runmake failed
| ERROR: Function failed: do_compile (see

/home/andrea/src/FPGA/poky/build/tmp/work/virtex_5_ml507_powerpc_440-poky-linux/linux-xilinx/3.3-r02/temp/log.do_compile.10129

for further information)
ERROR: Task 811 (/home/andrea/src/FPGA/poky/meta-xilinx/recipes-kernel/linux/linux-xilinx_3.3.bb,

do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1662 tasks of which 1660 didn't need to be rerun and 2 failed.
Waiting for 0 running tasks to finish:

Summary: 2 tasks failed:
/home/andrea/src/FPGA/poky/meta-xilinx/recipes-bsp/u-boot/u-boot-xilinx_git.bb,

Quoted 6 lines

do_configure /home/andrea/src/FPGA/poky/meta-xilinx/recipes-kernel/linux/linux-xilinx_3.3.bb,

do_compile
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.

All the best
Andrea

Quoted 25 lines · Elvis Dowson

Hi Andrea,

Quoted 6 lines · Andrea Sterbini

The problems I have found (and someway fixed) are:

1) when I do "bitbake meta-toolchain" I get an error complaining that the compiler is not able to build for powerpc with FPU
Fix: I have changed the ml507 rules to include just the soft FPU

I never did get soft-float to work properly with gcc-4.6 or gcc-4.7. I got soft-float to work with gcc-4.5.4.

hard float fpu support worked with gcc-4.7.

Were you able to boot and login to the command prompt with the generated images ?

Best regards,

Elvis Dowson