Skip to contentSkip to conversation

HPPA support for IGNITE-UX install discs

DISCUSSION Helge Deller 1 participant 1 message Nov 16, 2020 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): 519529904.604445.1605544518496.JavaMail.administrator@n7.nabble.com

#1 lore raw
Quoted 11 lines · On 11/16/20 5:35 PM, [email protected] wrote:

In qemu the B160L emulation isn't complete yet.
The SCSI disc is emulated by a "virtual built-in" PCI SCSI card, while the original B160L has a NCR 53C710 SCSI chip internal in the LASI controller.
Additionally the LASI emulation isn't complete either.
My assumption is, that your Install CD for the analyzer will only detect real LASI/53C710 chips and ignore the virtual PCI card. That's why it doesn't
detect any discs.
_________________________________________________________

Quoted 5 lines

Many years ago I had to install HP-UX 10.20 on a 712/9000 machine.
At first I tried with a third-party SCSI hard disk, unsuccessfully.
Then I replaced it with an HP hard disk and could install the os successfully.
So I would confirm that the 10.20 installation process looks for HP physical drives and don't accept anything else. Any chance to deceive it?

The IGNITE-UX install disc doesn't detect any *SCSI controllers*, so I can not say if you need real HP hard discs in this case.

Quoted 1 line

It seems it's not so for the 11.11 installation: I'm just installing it on Qemu.

Yes, there the emulated LSI 53c895 SCSI controller is supported & detected.

Helge