pl2303 works at 500kbps
Subsystems (2)
PATCH 1/1 pl2303 works at 500kbps
My PL2303HX works at 500kbps after applying this patch.
I suppose that it could work at other non standard speeds since this fix
"correctly handle baudrates above 115200"
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/usb/serial/pl2303.c?id=8d48fdf689fed2c73c493e5146d1463689246442
came after this one
"fix baud rate handling in case of unsupported values"
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/usb/serial/pl2303.c?id=25b8286805e856c8c7fda127018e31032c918015
but I only can test it with 500000.
Patch made against mainline but tested with 3.4.45
Please CC me since I'm not subscribed
Signed-off-by Luca Olivetti <[email protected]>
---
drivers/usb/serial/pl2303.c +1 -1
@@ -275,7 +275,7 @@ static void pl2303_set_termios(struct tty_struct *tty,u8 control;const int baud_sup[] = {75 ,150 ,300 ,600 ,1200 ,1800 ,2400 ,3600 ,4800 ,7200 ,9600 ,14400 ,19200 ,28800 ,38400 , -57600 ,115200 ,230400 ,460800 ,614400 , +57600 ,115200 ,230400 ,460800 ,500000 ,614400 ,921600 ,1228800 ,2457600 ,3000000 ,6000000 };int baud_floor, baud_ceil;int k;