Skip to contentSkip to conversation

ata1.00: failed to enable AA (error_mask=0x1)

DISCUSSION Milen Kidane 1 participant 1 message May 24, 2013

lore
Share & tools
lore
#0 lore raw

Hello,

Please advise if you can help me with bellow problem. I receive the following messages on boot:

May 25 01:52:37 Leny kernel: ata1.00: failed to enable AA (error_mask=0x1)
May 25 01:52:37 Leny kernel: ata1.00: ATA-8: ST500LM012 HN-M500MBB,
2AR10001, max UDMA/100
May 25 01:52:37 Leny kernel: ata1.00: 976773168 sectors, multi 0: LBA48
NCQ (depth 31/32)
May 25 01:52:37 Leny kernel: ata1.00: failed to enable AA (error_mask=0x1)
May 25 01:52:37 Leny kernel: ata1.00: configured for UDMA/100
May 25 01:52:37 Leny kernel: scsi 0:0:0:0: Direct-Access     ATA     

ST500LM012 HN-M5 2AR1 PQ: 0 ANSI: 5

lspci shows the following:

00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
Subsystem: Lenovo Device 3975
Kernel driver in use: ahci
Kernel modules: ahci

I have read topics varying from "it's nothing" to "your HDD will fail soon", so I really do not know what is this.

Please cc me in the reply if you can. Thank you very much.