Skip to contentSkip to conversation

arm-soc: Xilinx zynq clock changes for v3.11

GIT PULL Michal Simek 3 participants 8 messages May 27, 2013 – Jun 8, 2013

lore
Share & tools
lore
#0 lore raw

Hi Arnd and Olof,

please pull the following changes to your arm-soc tree. We haven't got any response from audience or clk maintainer but we discussed these changes with him in several threads. The major change is to have easy to going DT clock description in one node and do not describe the whole clock tree in details which none uses.

Thanks,
Michal

The following changes since commit c7788792a5e7b0d5d7f96d0766b4cb6112d47d75:

Linux 3.10-rc2 (2013-05-20 14:37:38 -0700)

are available in the git repository at:

git://git.xilinx.com/linux-xlnx.git tags/zynq-clk-for-3.11

for you to fetch changes up to 83d6e5996a34267e4402e6365c528bddd042ddf3:

clk: zynq: Remove deprecated clock code (2013-05-27 09:21:49 +0200)

----------------------------------------------------------------
arm: Xilinx Zynq clock changes for v3.11

Change Xilinx Zynq DT clock description which reflects logical abstraction of Zynq's clock tree.

- Refactor PLL driver
- Use new clock controller driver
- Change timer and uart drivers

----------------------------------------------------------------
Soren Brinkmann (4):
clk: zynq: Factor out PLL driver
clk: zynq: Add clock controller driver
arm: zynq: Migrate platform to clock controller
clk: zynq: Remove deprecated clock code

 Documentation/devicetree/bindings/clock/zynq-7000.txt | 123 ++++++++++++++-------
 arch/arm/boot/dts/zynq-7000.dtsi                      |  71 ++++--------
 arch/arm/boot/dts/zynq-zc702.dts                      |   4 -
 arch/arm/mach-zynq/slcr.c                             |   2 +-
 drivers/clk/Makefile                                  |   2 +-
 drivers/clk/clk-zynq.c                                | 378 --------------------------------------------------------------
 drivers/clk/zynq/Makefile                             |   3 +
 drivers/clk/zynq/clkc.c                               | 533 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/zynq/pll.c                                | 235 +++++++++++++++++++++++++++++++++++++++
 drivers/clocksource/cadence_ttc_timer.c               |  23 +++-
 drivers/tty/serial/xilinx_uartps.c                    |  85 +++++++++++---
 include/linux/clk/zynq.h                              |   8 +-
 12 files changed, 972 insertions(+), 495 deletions(-)
 delete mode 100644 drivers/clk/clk-zynq.c
 create mode 100644 drivers/clk/zynq/Makefile
 create mode 100644 drivers/clk/zynq/clkc.c
 create mode 100644 drivers/clk/zynq/pll.c
Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130527/285c1f01/attachment.sig>
#1 lore raw

Hi guys,

can you please look at this?
The reason is that based on this we can start to send zynq driver for review because they depend on this.

Thanks,
Michal

Quoted 60 lines · Michal Simek

Hi Arnd and Olof,

please pull the following changes to your arm-soc tree. We haven't got any response from audience or clk maintainer but we discussed these changes with him in several threads. The major change is to have easy to going DT clock description in one node and do not describe the whole clock tree in details which none uses.

Thanks,
Michal

The following changes since commit c7788792a5e7b0d5d7f96d0766b4cb6112d47d75:

Linux 3.10-rc2 (2013-05-20 14:37:38 -0700)

are available in the git repository at:

git://git.xilinx.com/linux-xlnx.git tags/zynq-clk-for-3.11

for you to fetch changes up to 83d6e5996a34267e4402e6365c528bddd042ddf3:

clk: zynq: Remove deprecated clock code (2013-05-27 09:21:49 +0200)

----------------------------------------------------------------
arm: Xilinx Zynq clock changes for v3.11

Change Xilinx Zynq DT clock description which reflects logical abstraction of Zynq's clock tree.

- Refactor PLL driver
- Use new clock controller driver
- Change timer and uart drivers

----------------------------------------------------------------
Soren Brinkmann (4):
clk: zynq: Factor out PLL driver
clk: zynq: Add clock controller driver
arm: zynq: Migrate platform to clock controller
clk: zynq: Remove deprecated clock code

 Documentation/devicetree/bindings/clock/zynq-7000.txt | 123 ++++++++++++++-------
 arch/arm/boot/dts/zynq-7000.dtsi                      |  71 ++++--------
 arch/arm/boot/dts/zynq-zc702.dts                      |   4 -
 arch/arm/mach-zynq/slcr.c                             |   2 +-
 drivers/clk/Makefile                                  |   2 +-
 drivers/clk/clk-zynq.c                                | 378 --------------------------------------------------------------
 drivers/clk/zynq/Makefile                             |   3 +
 drivers/clk/zynq/clkc.c                               | 533 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/zynq/pll.c                                | 235 +++++++++++++++++++++++++++++++++++++++
 drivers/clocksource/cadence_ttc_timer.c               |  23 +++-
 drivers/tty/serial/xilinx_uartps.c                    |  85 +++++++++++---
 include/linux/clk/zynq.h                              |   8 +-
 12 files changed, 972 insertions(+), 495 deletions(-)
 delete mode 100644 drivers/clk/clk-zynq.c
 create mode 100644 drivers/clk/zynq/Makefile
 create mode 100644 drivers/clk/zynq/clkc.c
 create mode 100644 drivers/clk/zynq/pll.c
Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130530/58a3fa3e/attachment-0001.sig>
#3 lore raw
In reply to Michal Simek
Quoted 8 lines · Michal Simek

Hi Arnd and Olof,

please pull the following changes to your arm-soc tree. We haven't got any response from audience or clk maintainer but we discussed these changes with him in several threads. The major change is to have easy to going DT clock description in one node and do not describe the whole clock tree in details which none uses.

Hi,

I don't see any acks from Mike Turquette on any of these. Mike?

-Olof

#2 lore raw
In reply to Michal Simek
Quoted 6 lines · Michal Simek

Hi guys,

can you please look at this?
The reason is that based on this we can start to send zynq driver for review because they depend on this.

Sorry, haven't done many merges these week. See comment on the original request though.

-Olof

#4 lore raw
In reply to Olof Johansson

Quoting Olof Johansson (2013-05-31 22:19:13)

Quoted 10 lines · Michal Simek
Quoted 8 lines

Hi Arnd and Olof,

please pull the following changes to your arm-soc tree. We haven't got any response from audience or clk maintainer but we discussed these changes with him in several threads. The major change is to have easy to going DT clock description in one node and do not describe the whole clock tree in details which none uses.

Quoted 4 lines

Hi,

I don't see any acks from Mike Turquette on any of these. Mike?

I Acked it but they were never applied since my Ack came after the pull request had been sent:

http://article.gmane.org/gmane.linux.kernel/1499697

Regards,
Mike

Quoted 2 lines

-Olof

#5 lore raw
Quoted 13 lines · Mike Turquette

Quoting Olof Johansson (2013-05-31 22:19:13)

Quoted 12 lines · Michal Simek
Quoted 8 lines

Hi Arnd and Olof,

please pull the following changes to your arm-soc tree. We haven't got any response from audience or clk maintainer but we discussed these changes with him in several threads. The major change is to have easy to going DT clock description in one node and do not describe the whole clock tree in details which none uses.

Hi,

Quoted 7 lines
Quoted 2 lines

I don't see any acks from Mike Turquette on any of these. Mike?

I Acked it but they were never applied since my Ack came after the pull request had been sent:

http://article.gmane.org/gmane.linux.kernel/1499697

Yep. I can look how time went but I wait at least week for any reaction. Mike was probably out that's why I have added patches to the branch and sent pull request and then Mike sent his ACK.
If you like I can add Mike's ack to that patches and send you new pull request.

Thanks,
Michal

Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130603/fcc4a712/attachment-0001.sig>
#6 lore raw
In reply to Mike Turquette

Hi Arnd and Olof,

please pull the following changes to your arm-soc tree. This is the second pull request based on our discussion with Mike I have added Mike's ACK to all patches.

Thanks,
Michal

The following changes since commit c7788792a5e7b0d5d7f96d0766b4cb6112d47d75:

Linux 3.10-rc2 (2013-05-20 14:37:38 -0700)

are available in the git repository at:

git://git.xilinx.com/linux-xlnx.git tags/zynq-clk-for-3.11

for you to fetch changes up to 97c4e87d45498fb4d18c995721bba72345a7d257:

clk: zynq: Remove deprecated clock code (2013-05-27 09:21:49 +0200)

----------------------------------------------------------------
arm: Xilinx Zynq clock changes for v3.11

Change Xilinx Zynq DT clock description which reflects logical abstraction of Zynq's clock tree.

- Refactor PLL driver
- Use new clock controller driver
- Change timer and uart drivers

----------------------------------------------------------------
Soren Brinkmann (4):
clk: zynq: Factor out PLL driver
clk: zynq: Add clock controller driver
arm: zynq: Migrate platform to clock controller
clk: zynq: Remove deprecated clock code

 Documentation/devicetree/bindings/clock/zynq-7000.txt | 123 +++++++---
 arch/arm/boot/dts/zynq-7000.dtsi                      |  71 ++----
 arch/arm/boot/dts/zynq-zc702.dts                      |   4 -
 arch/arm/mach-zynq/slcr.c                             |   2 +-
 drivers/clk/Makefile                                  |   2 +-
 drivers/clk/clk-zynq.c                                | 378 -------------------------------
 drivers/clk/zynq/Makefile                             |   3 +
 drivers/clk/zynq/clkc.c                               | 533 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/zynq/pll.c                                | 235 +++++++++++++++++++
 drivers/clocksource/cadence_ttc_timer.c               |  23 +-
 drivers/tty/serial/xilinx_uartps.c                    |  85 +++++--
 include/linux/clk/zynq.h                              |   8 +-
 12 files changed, 972 insertions(+), 495 deletions(-)
 delete mode 100644 drivers/clk/clk-zynq.c
 create mode 100644 drivers/clk/zynq/Makefile
 create mode 100644 drivers/clk/zynq/clkc.c
 create mode 100644 drivers/clk/zynq/pll.c
Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130606/c31e185c/attachment.sig>
#7 lore raw
Quoted 9 lines · Michal Simek

Hi Arnd and Olof,

please pull the following changes to your arm-soc tree. This is the second pull request based on our discussion with Mike I have added Mike's ACK to all patches.

Thanks,
Michal

Quoted 7 lines

The following changes since commit c7788792a5e7b0d5d7f96d0766b4cb6112d47d75:

Linux 3.10-rc2 (2013-05-20 14:37:38 -0700)

are available in the git repository at:

git://git.xilinx.com/linux-xlnx.git tags/zynq-clk-for-3.11

Thanks, pulled into next/soc.

-Olof