Skip to contentSkip to conversation

How can I change the install path of the rootfs?

DISCUSSION Sebastian Süsens 2 participants 3 messages May 29, 2013

lore
Share & tools
lore
#0 lore raw

Hello,

I want to install scripts in a folder names can. My bitbake file looks following:

DESCRIPTION = "Test scripts for testing xxsq701 interfaces" SECTION = "test_applications"
PR = "r0"
PN = "test-scripts"
LICENSE = "${MYC_LICENSE}"
LIC_FILES_CHKSUM = "file://${MYC_LICENSFILE};md5=${MYCMD5_LICENSFILE}"

S="${TOPDIR}/../applications/meta-testapps/test-scripts/src"

do_install() {
    echo "DO_INSTALL: install test-scripts to ${D}/can"
    install -d ${D}/can
    install -m 0777 ${S}/can/init_can.sh ${D}/can
}

When I run bitbake I get following error:
WARNING: QA Issue: test-scripts: Files/directories were installed but not shipped
/can
/can/init_can.sh

And bitbakes break off with this message:
Unable to resolve package test-scripts

When I replace can with ${bindir} it works.

How can I change the install path of the rootfs?

Signature · 14 lines
------------------------------------------------------------------------
   Sebastian Süsens               Tel.   +49 4321 559 56-27
   mycable GmbH                   Fax    +49 4321 559 56-10
   Gartenstrasse 10
   24534 Neumuenster, Germany     Email  [email protected]
------------------------------------------------------------------------
   mycable GmbH, Managing Director: Michael Carstens-Behrens
   USt-IdNr: DE 214 231 199, Amtsgericht Kiel, HRB 1797 NM
------------------------------------------------------------------------
   This e-mail and any files transmitted with it are confidential and
   intended solely for the use of the individual or entity to whom
   they are addressed. If you have received this e-mail in error,
   please notify the sender and delete all copies from your system.
------------------------------------------------------------------------ 
#1 lore raw
Quoted 25 lines · Sebastian Süsens

I want to install scripts in a folder names can. My bitbake file looks following:

DESCRIPTION = "Test scripts for testing xxsq701 interfaces" SECTION = "test_applications"
PR = "r0"
PN = "test-scripts"
LICENSE = "${MYC_LICENSE}"
LIC_FILES_CHKSUM = "file://${MYC_LICENSFILE};md5=${MYCMD5_LICENSFILE}"

S="${TOPDIR}/../applications/meta-testapps/test-scripts/src"

do_install() {
    echo "DO_INSTALL: install test-scripts to ${D}/can"
    install -d ${D}/can
    install -m 0777 ${S}/can/init_can.sh ${D}/can
}

When I run bitbake I get following error:
WARNING: QA Issue: test-scripts: Files/directories were installed but not shipped
/can
/can/init_can.sh

Quoted 7 lines

And bitbakes break off with this message:
Unable to resolve package test-scripts

When I replace can with ${bindir} it works.

How can I change the install path of the rootfs?

If you want to install stuff into a non-standard path then you'll need to redefine the FILES_ variables (which defaults to $bindir and so on, for convenience). In this case, FILES_${PN} = "/can" will be sufficient.

http://www.yoctoproject.org/docs/1.4/ref-manual/ref-manual.html#var-FILES
is the relevant section in the reference documentation.

Ross

#2 lore raw
Quoted 38 lines · Ross
Quoted 25 lines · Sebastian Süsens

I want to install scripts in a folder names can. My bitbake file looks following:

DESCRIPTION = "Test scripts for testing xxsq701 interfaces" SECTION = "test_applications"
PR = "r0"
PN = "test-scripts"
LICENSE = "${MYC_LICENSE}"
LIC_FILES_CHKSUM = "file://${MYC_LICENSFILE};md5=${MYCMD5_LICENSFILE}"

S="${TOPDIR}/../applications/meta-testapps/test-scripts/src"

do_install() {
    echo "DO_INSTALL: install test-scripts to ${D}/can"
    install -d ${D}/can
    install -m 0777 ${S}/can/init_can.sh ${D}/can
}

When I run bitbake I get following error:
WARNING: QA Issue: test-scripts: Files/directories were installed but not shipped
/can
/can/init_can.sh

Quoted 7 lines

And bitbakes break off with this message:
Unable to resolve package test-scripts

When I replace can with ${bindir} it works.

How can I change the install path of the rootfs?

If you want to install stuff into a non-standard path then you'll need to redefine the FILES_ variables (which defaults to $bindir and so on, for convenience). In this case, FILES_${PN} = "/can" will be sufficient.

Quoted 4 lines

http://www.yoctoproject.org/docs/1.4/ref-manual/ref-manual.html#var-FILES
is the relevant section in the reference documentation.

Ross

Thank you.

Signature · 14 lines
------------------------------------------------------------------------
   Sebastian Süsens               Tel.   +49 4321 559 56-27
   mycable GmbH                   Fax    +49 4321 559 56-10
   Gartenstrasse 10
   24534 Neumuenster, Germany     Email  [email protected]
------------------------------------------------------------------------
   mycable GmbH, Managing Director: Michael Carstens-Behrens
   USt-IdNr: DE 214 231 199, Amtsgericht Kiel, HRB 1797 NM
------------------------------------------------------------------------
   This e-mail and any files transmitted with it are confidential and
   intended solely for the use of the individual or entity to whom
   they are addressed. If you have received this e-mail in error,
   please notify the sender and delete all copies from your system.
------------------------------------------------------------------------