keystone2 board hangs with smp kernel
Hello Cyril,
I have got one TI keystone2 board, and tried different tags of tree: git://arago-project.org/git/projects/linux-keystone.git,
but seems the kernel always hangs as follows, and kernel runs ok if add "nosmp" flag.
[ 0.028386] CPU: Testing write buffer coherency: ok [ 0.032493] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.037108] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 0.043763] Setting up static identity map for 0x80464628 - 0x8046465c
The uboot version which I used is from git://arago-project.org/git/projects/u-boot-keystone.git
with tag DEV.MCSDK-2013-01.10, I also tried other tags, but seems no different effect.
Could you give some advice about smp problem? Thanks in advance!
Regards,
Xiao
Quoted 2 lines · On 06/03/2013 10:18 AM, [email protected] wrote:
Hello Cyril,
Oops seems Cyril has left TI since I got below infos.
Delivery to the following recipient failed permanently:
Technical details of permanent failure:
Google tried to deliver your message, but it was rejected by the server for the recipient domain ti.com by cluster5.us.messagelabs.com. [216.82.253.147].
The error that the other server returned was:
550 Invalid recipient<[email protected]> (#5.1.1)
Could someone else can help about that? Thanks.
Regards,
Xiao
Quoted 15 lines
I have got one TI keystone2 board, and tried different tags of tree:
git://arago-project.org/git/projects/linux-keystone.git,
but seems the kernel always hangs as follows, and kernel runs ok if add "nosmp" flag.[ 0.028386] CPU: Testing write buffer coherency: ok [ 0.032493] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.037108] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 0.043763] Setting up static identity map for 0x80464628 - 0x8046465cThe uboot version which I used is from
git://arago-project.org/git/projects/u-boot-keystone.git
with tag DEV.MCSDK-2013-01.10, I also tried other tags, but seems no different effect.Could you give some advice about smp problem? Thanks in advance!
Regards,
Xiao
Oops, I forgot to load boot monitor code before run smp kernel.
Regards,
Xiao
Quoted 17 lines · On 06/03/2013 10:18 AM, [email protected] wrote:
Hello Cyril,
I have got one TI keystone2 board, and tried different tags of tree:
git://arago-project.org/git/projects/linux-keystone.git,
but seems the kernel always hangs as follows, and kernel runs ok if add "nosmp" flag.[ 0.028386] CPU: Testing write buffer coherency: ok [ 0.032493] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.037108] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 0.043763] Setting up static identity map for 0x80464628 - 0x8046465cThe uboot version which I used is from
git://arago-project.org/git/projects/u-boot-keystone.git
with tag DEV.MCSDK-2013-01.10, I also tried other tags, but seems no different effect.Could you give some advice about smp problem? Thanks in advance!
Regards,
Xiao