Skip to contentSkip to conversation

Mounting issue

DISCUSSION tomy 2 participants 4 messages Jun 8, 2013 – Jun 10, 2013 1 message not in the archive

lore
Share & tools
lore

tomy

author
#1 lore raw
In reply to a message not in the archive

Hello,
Currently I am working on an embedded system which is having
512 MB NAND flash . The embedded system is having u-boot, kernel, root filesystem (JFFS2) and a backup file system all reside in NAND flash. I am now facing a booting issue randomly (/*reboot */command from linux console ) and the snapshot of the error is given below
/
//udevd-work[1092]: '/etc/udev/scripts/network.sh' unexpected exit with status 0x000b//
//udevd-work[1089]: '/etc/udev/scripts/network.sh' unexpected exit with status 0x000b//
//udevd-work[1032]: '/etc/udev/scripts/mount.sh' unexpected exit with status 0x000b//
//
//
//udevd-work[1112]: '/etc/udev/scripts/network.sh' unexpected exit with status 0x000b//
//
//
///etc/init.d/rc: line 45: 1760 Segmentation fault "$@"//
///etc/rcS.d/S37populate-volatile.sh: line 194: 1773 Segmentation
fault sh /etc/volatile.cache//
//ln: /var/run/ld.so.cache: No such file or directory//
///etc/init.d/rc: line 45: 1780 Segmentation fault "$@"//
///etc/rcS.d/S55bootmisc.sh: line 68: 1784 Segmentation fault /etc/init.d/hwclock.sh start//
//
//INIT: Entering runlevel: 5/

After this, the board is not pinging and not able to login through console and the only solution to recover from this is power reboot. But in the next reboot everything will be ok.

The problem is happening randomly may be in 30 or 40 software reboots. I am not sure whether the issue is happening because of mounting problem, but still why this is not happening in every reboots.

So can you people help me to find out the root cause of this problem.

Regards,
Tomy

"Disclaimer: This message is being sent from Kalki Communication Technologies Pvt Ltd (KALKITECH). and may contain information which is confidential or

privileged. If you are not the intended recipient, please advise the sender immediately by reply e-mail and delete this message and any attachments

without retaining a copy. Any unauthorized use of the content of this message can expose the responsible party to civil and/or criminal penalties,

and may constitute a more serious offense. Further the company does not accept liability for any errors, omissions, viruses or computer problems

experienced as a result of this transmission. If you have received this message in error, notice is hereby given that no representation, contract or

other binding obligation shall be created by this e-mail."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20130608/93cdcc9d/attachment.html

#2 lore raw
Quoted 4 lines · tomy

Hello,
Currently I am working on an embedded system which is having

512 MB NAND flash . The embedded system is having u-boot, kernel, root filesystem (JFFS2) and a backup file system all reside in NAND flash. I am now facing a booting issue randomly (reboot command from linux console ) and the snapshot of the error is given below

Quoted 1 line

Does this happen only when u give the reboot command? Could it be possible that some files on your flash partition have been corrupted?

What kernel and busybox version are you running?

What does this 0x000b exit status mean? Looks like your scripts may have been killed by the reboot cmd I've given.

HTH,
-mandeep

Quoted 1 line

udevd-work[1092]: '/etc/udev/scripts/network.sh' unexpected exit with

status 0x000b

Quoted 1 line

udevd-work[1089]: '/etc/udev/scripts/network.sh' unexpected exit with

status 0x000b

Quoted 1 line

udevd-work[1032]: '/etc/udev/scripts/mount.sh' unexpected exit with

status 0x000b

Quoted 3 lines

udevd-work[1112]: '/etc/udev/scripts/network.sh' unexpected exit with

status 0x000b

Quoted 4 lines

/etc/init.d/rc: line 45: 1760 Segmentation fault "$@"
/etc/rcS.d/S37populate-volatile.sh: line 194: 1773 Segmentation

fault sh /etc/volatile.cache

Quoted 3 lines

ln: /var/run/ld.so.cache: No such file or directory
/etc/init.d/rc: line 45: 1780 Segmentation fault "$@"
/etc/rcS.d/S55bootmisc.sh: line 68: 1784 Segmentation fault

/etc/init.d/hwclock.sh start

Quoted 4 lines

INIT: Entering runlevel: 5

After this, the board is not pinging and not able to login through

console and the only solution to recover from this is power reboot. But in the next reboot everything will be ok.

Quoted 2 lines

The problem is happening randomly may be in 30 or 40 software reboots. I

am not sure whether the issue is happening because of mounting problem, but still why this is not happening in every reboots.

Quoted 12 lines

So can you people help me to find out the root cause of this problem.

Regards,
Tomy

Quoted 1 line

"Disclaimer: This message is being sent from Kalki Communication

Technologies

Quoted 6 lines

Pvt Ltd (KALKITECH). and may contain information which is confidential or

privileged. If you are not the intended recipient, please advise the

sender

Quoted 6 lines

immediately by reply e-mail and delete this message and any attachments

without retaining a copy. Any unauthorized use of the content of this

message

Quoted 6 lines

can expose the responsible party to civil and/or criminal penalties,

and may constitute a more serious offense. Further the company does not

accept

Quoted 8 lines

liability for any errors, omissions, viruses or computer problems

experienced as a result of this transmission. If you have received this

message in error, notice is hereby given that no representation, contract

or

Quoted 12 lines

other binding obligation shall be created by this e-mail."

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20130609/c36b103e/attachment-0001.html

author
#3 lore raw

Hello,
This is happening when we give reboot command from Linux
console. But if the files got corrupted then every time this issue should occur rt?. This is happening very randomly. Every running scripts will be closed as part of reboot

Regards,
Tomy

Quoted 91 lines · Mandeep Sandhu
Quoted 4 lines · On Jun 8, 2013 12:56 PM, "tomy" <[email protected] <mailto:[email protected]>>…

Hello,
Currently I am working on an embedded system which is

having 512 MB NAND flash . The embedded system is having u-boot, kernel, root filesystem (JFFS2) and a backup file system all reside in NAND flash. I am now facing a booting issue randomly (reboot command from linux console ) and the snapshot of the error is given below

Quoted 1 line

Does this happen only when u give the reboot command? Could it be possible that some files on your flash partition have been corrupted?

What kernel and busybox version are you running?

What does this 0x000b exit status mean? Looks like your scripts may have been killed by the reboot cmd I've given.

HTH,
-mandeep

Quoted 1 line

udevd-work[1092]: '/etc/udev/scripts/network.sh' unexpected exit

with status 0x000b

Quoted 1 line

udevd-work[1089]: '/etc/udev/scripts/network.sh' unexpected exit

with status 0x000b

Quoted 1 line

udevd-work[1032]: '/etc/udev/scripts/mount.sh' unexpected exit with

status 0x000b

Quoted 3 lines

udevd-work[1112]: '/etc/udev/scripts/network.sh' unexpected exit

with status 0x000b

Quoted 4 lines

/etc/init.d/rc: line 45: 1760 Segmentation fault "$@"
/etc/rcS.d/S37populate-volatile.sh: line 194: 1773 Segmentation

fault sh /etc/volatile.cache

Quoted 3 lines

ln: /var/run/ld.so.cache: No such file or directory
/etc/init.d/rc: line 45: 1780 Segmentation fault "$@"
/etc/rcS.d/S55bootmisc.sh: line 68: 1784 Segmentation fault

/etc/init.d/hwclock.sh start

Quoted 4 lines

INIT: Entering runlevel: 5

After this, the board is not pinging and not able to login through

console and the only solution to recover from this is power reboot. But in the next reboot everything will be ok.

Quoted 2 lines

The problem is happening randomly may be in 30 or 40 software

reboots. I am not sure whether the issue is happening because of mounting problem, but still why this is not happening in every reboots.

Quoted 12 lines

So can you people help me to find out the root cause of this problem.

Regards,
Tomy

Quoted 1 line

"Disclaimer: This message is being sent from Kalki Communication

Technologies

Quoted 2 lines

Pvt Ltd (KALKITECH). and may contain information which is

confidential or

Quoted 4 lines

privileged. If you are not the intended recipient, please advise the

sender

Quoted 6 lines

immediately by reply e-mail and delete this message and any attachments

without retaining a copy. Any unauthorized use of the content of

this message

Quoted 6 lines

can expose the responsible party to civil and/or criminal penalties,

and may constitute a more serious offense. Further the company does

not accept

Quoted 1 line
Quoted 21 lines
Quoted 7 lines

liability for any errors, omissions, viruses or computer problems

experienced as a result of this transmission. If you have received this

message in error, notice is hereby given that no representation,

contract or

Quoted 12 lines

other binding obligation shall be created by this e-mail."

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org <mailto:[email protected]>
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

"Disclaimer: This message is being sent from Kalki Communication Technologies Pvt Ltd (KALKITECH). and may contain information which is confidential or

privileged. If you are not the intended recipient, please advise the sender immediately by reply e-mail and delete this message and any attachments

without retaining a copy. Any unauthorized use of the content of this message can expose the responsible party to civil and/or criminal penalties,

and may constitute a more serious offense. Further the company does not accept liability for any errors, omissions, viruses or computer problems

experienced as a result of this transmission. If you have received this message in error, notice is hereby given that no representation, contract or

other binding obligation shall be created by this e-mail."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20130609/6e69c120/attachment.html

#4 lore raw
Quoted 5 lines · tomy

Hello,
This is happening when we give reboot command from Linux
console. But if the files got corrupted then every time this issue should occur rt?. This is happening very randomly.

Is your root FS mounted read-only? I'm not sure if this can happen, but it could be that the cached version of these files (which reside in RAM) could have got corrupted? I haven't played around with JFFS2 much (mostly used YAFFS2) so maybe somebody experienced with JFFS2 can throw some light on this.

Can you reformat your flash and put the root FS again on it? While formatting see if bad blocks are reported.

-mandeep

Quoted 128 lines

Every running scripts will be closed as part of reboot

Regards,
Tomy

On 09-Jun-2013 12:16 PM, Mandeep Sandhu wrote:

Quoted 4 lines · tomy

Hello,
Currently I am working on an embedded system which is having

512 MB NAND flash . The embedded system is having u-boot, kernel, root filesystem (JFFS2) and a backup file system all reside in NAND flash. I am now facing a booting issue randomly (reboot command from linux console ) and the snapshot of the error is given below

Quoted 1 line

Does this happen only when u give the reboot command? Could it be possible that some files on your flash partition have been corrupted?

What kernel and busybox version are you running?

What does this 0x000b exit status mean? Looks like your scripts may have been killed by the reboot cmd I've given.

HTH,
-mandeep

Quoted 1 line

udevd-work[1092]: '/etc/udev/scripts/network.sh' unexpected exit with

status 0x000b

Quoted 1 line

udevd-work[1089]: '/etc/udev/scripts/network.sh' unexpected exit with

status 0x000b

Quoted 1 line

udevd-work[1032]: '/etc/udev/scripts/mount.sh' unexpected exit with

status 0x000b

Quoted 3 lines

udevd-work[1112]: '/etc/udev/scripts/network.sh' unexpected exit with

status 0x000b

Quoted 4 lines

/etc/init.d/rc: line 45: 1760 Segmentation fault "$@"
/etc/rcS.d/S37populate-volatile.sh: line 194: 1773 Segmentation

fault sh /etc/volatile.cache

Quoted 3 lines

ln: /var/run/ld.so.cache: No such file or directory
/etc/init.d/rc: line 45: 1780 Segmentation fault "$@"
/etc/rcS.d/S55bootmisc.sh: line 68: 1784 Segmentation fault

/etc/init.d/hwclock.sh start

Quoted 4 lines

INIT: Entering runlevel: 5

After this, the board is not pinging and not able to login through

console and the only solution to recover from this is power reboot. But in the next reboot everything will be ok.

Quoted 2 lines

The problem is happening randomly may be in 30 or 40 software reboots. I

am not sure whether the issue is happening because of mounting problem, but still why this is not happening in every reboots.

Quoted 12 lines

So can you people help me to find out the root cause of this problem.

Regards,
Tomy

Quoted 1 line

"Disclaimer: This message is being sent from Kalki Communication

Technologies

Quoted 2 lines

Pvt Ltd (KALKITECH). and may contain information which is confidential

or

Quoted 4 lines

privileged. If you are not the intended recipient, please advise the

sender

Quoted 6 lines

immediately by reply e-mail and delete this message and any attachments

without retaining a copy. Any unauthorized use of the content of this

message

Quoted 6 lines

can expose the responsible party to civil and/or criminal penalties,

and may constitute a more serious offense. Further the company does not

accept

Quoted 8 lines

liability for any errors, omissions, viruses or computer problems

experienced as a result of this transmission. If you have received this

message in error, notice is hereby given that no representation,

contract or

Quoted 12 lines

other binding obligation shall be created by this e-mail."

_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

"Disclaimer: This message is being sent from Kalki Communication Technologies Pvt Ltd (KALKITECH). and may contain information which is confidential or

privileged. If you are not the intended recipient, please advise the sender immediately by reply e-mail and delete this message and any attachments

without retaining a copy. Any unauthorized use of the content of this message can expose the responsible party to civil and/or criminal penalties,

Quoted 10 lines

and may constitute a more serious offense. Further the company does not accept liability for any errors, omissions, viruses or computer problems

experienced as a result of this transmission. If you have received this message in error, notice is hereby given that no representation, contract or

other binding obligation shall be created by this e-mail."

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20130610/0c2e90e1/attachment-0001.html