net: sh_eth: fix incorrect RX length error if R8A7740
Subsystems (4)
PATCH v2 1/1 net: sh_eth: fix incorrect RX length error if R8A7740
This patch fixes an issue that the driver increments the "RX length error" on every buffer in sh_eth_rx() if the R8A7740.
This patch also adds a description about the Receive Frame Status bits.
---
About v2:
- This patch is based on the latest net.git.
- Fix the description.
drivers/net/ethernet/renesas/sh_eth.c | 15 +++++++++++---- 1 files changed, 11 insertions(+), 4 deletions(-)
drivers/net/ethernet/renesas/sh_eth.c +11 -4
@@ -1401,16 +1401,23 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status) desc_status =edmac_to_cpu (mdp, rxdesc->status); pkt_len = rxdesc->frame_length; -#if defined(CONFIG_ARCH_R8A7740 ) - desc_status >>=16 ; -#endif -if (--boguscnt <0 )break ;if (!(desc_status &RDFEND )) ndev->stats.rx_length_errors++; +#if defined(CONFIG_ARCH_R8A7740 ) +/* +* In case of almost all GETHER/ETHERs, the Receive Frame State +* (RFS) bits in the Receive Descriptor 0 are from bit 9 to +* bit 0. However, in case of the R8A7740's GETHER, the RFS +* bits are from bit 25 to bit 16. So, the driver needs right +* shifting by 16. +*/ + desc_status >>=16 ; +#endif +if (desc_status & (RD_RFS1 |RD_RFS2 |RD_RFS3 |RD_RFS4 |RD_RFS5 |RD_RFS6 |RD_RFS10 )) { ndev->stats.rx_errors++;
Signature · 1 line
1.7.1
From: "Shimoda, Yoshihiro" <[email protected]>
Date: Thu, 13 Jun 2013 10:15:45 +0900
Quoted 5 lines
This patch fixes an issue that the driver increments the "RX length error" on every buffer in
sh_eth_rx()if the R8A7740.
This patch also adds a description about the Receive Frame Status bits.Signed-off-by Yoshihiro Shimoda <[email protected]>
Applied, thanks.
Hello.
Quoted 7 lines · David Miller
Quoted 5 lines
This patch fixes an issue that the driver increments the "RX length error" on every buffer in
sh_eth_rx()if the R8A7740.
This patch also adds a description about the Receive Frame Status bits.Signed-off-by Yoshihiro Shimoda <[email protected]>Applied, thanks.
I've already asked to do this but will you queue this for stable now?
WBR, Sergei
From: Sergei Shtylyov <[email protected]>
Date: Thu, 13 Jun 2013 21:45:16 +0400
Quoted 10 lines
Hello.
Quoted 5 lines · David Miller
Quoted 5 lines
This patch fixes an issue that the driver increments the "RX length error"
on every buffer insh_eth_rx()if the R8A7740.
This patch also adds a description about the Receive Frame Status bits.
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
Signed-off-by Yoshihiro Shimoda <[email protected]>Applied, thanks.
I've already asked to do this but will you queue this for stable now?
Done.