Skip to contentSkip to conversation

please pull u-boot-samsung master

U-Boot Minkyu Kang 3 participants 10 messages Jun 17, 2013 – Jun 19, 2013

lore
Share & tools
lore
#0 lore raw

Dear Albert,

The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:

at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)

are available in the git repository at:

git://git.denx.de/u-boot-samsung master

for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:

MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)

----------------------------------------------------------------
Akshay Saraswat (2):
Exynos5: clock: Update the equation to calculate PLL output frequency
Exynos: uart: s5p: enabling the uart tx/rx fifo

Amar (9):
FDT: Add compatible string for DWMMC
EXYNOS5: FDT: Add DWMMC device node data
DWMMC: Initialise dwmci and resolve EMMC read write issues
EXYNOS5: DWMMC: Added FDT support for DWMMC
EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results.
SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
MMC: APIs to support resize of EMMC boot partition
SMDK5250: Enable EMMC booting
COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition

Arkadiusz Wlodarczyk (1):
arm:trats: change auto-booting to boot kernel with separate device tree blob

Inderpal Singh (3):
exynos: move tzpc_init to armv7/exynos
exynos: update tzpc to make it common for exynos4 and exynos5
exynos: Update origen and smdkv310 to use common tzpc_init

Naveen Krishna Chatradhi (2):
power: exynos-tmu: fix warnings and clean up code
power: exynos-tmu: use the mux_addr bit fields in tmu_control register

Rajeshwari Shinde (3):
SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
SMDK5250: Enable SPI Gigabyte device.
MMC: DWMMC: Fix FIFO_DEPTH calculation

 arch/arm/cpu/armv7/exynos/Makefile                 |    2 +-
 arch/arm/cpu/armv7/exynos/clock.c                  |   10 +-
 .../arm/cpu/armv7/exynos/tzpc.c                    |   25 +-
 arch/arm/cpu/armv7/s5p-common/Makefile             |    2 +
 arch/arm/dts/exynos5250.dtsi                       |   33 ++
 arch/arm/include/asm/arch-exynos/cpu.h             |    4 +
 arch/arm/include/asm/arch-exynos/dwmmc.h           |   11 +-
 arch/arm/include/asm/arch-exynos/tmu.h             |   58 ++-
 arch/arm/include/asm/arch-exynos/tzpc.h            |   20 +
 board/samsung/dts/exynos5250-smdk5250.dts          |   24 ++
 board/samsung/origen/lowlevel_init.S               |   44 +-
 board/samsung/origen/origen_setup.h                |   25 --
 board/samsung/smdk5250/Makefile                    |    5 +-
 board/samsung/smdk5250/clock_init.c                |   18 +
 board/samsung/smdk5250/clock_init.h                |    5 +
 board/samsung/smdk5250/exynos5-dt.c                |  423 ++++++++++++++++++++
 board/samsung/smdk5250/lowlevel_init.S             |    2 +
 board/samsung/smdk5250/setup.h                     |   25 --
 board/samsung/smdk5250/smdk5250.c                  |  223 +++--------
 board/samsung/smdk5250/spl_boot.c                  |   64 ++-
 board/samsung/smdkv310/lowlevel_init.S             |   60 +--
 common/cmd_mmc.c                                   |  109 ++++-
 doc/device-tree-bindings/exynos/dwmmc.txt          |   54 +++
 drivers/mmc/dw_mmc.c                               |   27 +-
 drivers/mmc/exynos_dw_mmc.c                        |  127 +++++-
 drivers/mmc/mmc.c                                  |  134 +++++++
 drivers/mtd/spi/Makefile                           |    1 +
 drivers/mtd/spi/gigadevice.c                       |   81 ++++
 drivers/mtd/spi/spi_flash.c                        |    3 +
 drivers/mtd/spi/spi_flash_internal.h               |    1 +
 drivers/power/exynos-tmu.c                         |  123 +++---
 drivers/serial/serial_s5p.c                        |   13 +-
 drivers/video/exynos_fb.c                          |    4 +-
 include/configs/exynos5250-dt.h                    |   11 +-
 include/configs/origen.h                           |    2 +
 include/configs/smdkv310.h                         |    2 +
 include/configs/trats.h                            |   17 +-
 include/dwmmc.h                                    |    3 +
 include/fdtdec.h                                   |    1 +
 include/mmc.h                                      |   26 ++
 lib/fdtdec.c                                       |    1 +
 spl/Makefile                                       |    4 +
 42 files changed, 1356 insertions(+), 471 deletions(-)
 rename board/samsung/smdk5250/tzpc_init.c => arch/arm/cpu/armv7/exynos/tzpc.c (69%)
 create mode 100644 board/samsung/smdk5250/exynos5-dt.c
 create mode 100644 doc/device-tree-bindings/exynos/dwmmc.txt
 create mode 100644 drivers/mtd/spi/gigadevice.c
Signature · 2 lines
Thanks,
Minkyu Kang.
#1 lore raw
Quoted 38 lines · Minkyu Kang

Dear Albert,

The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:

at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)

are available in the git repository at:

git://git.denx.de/u-boot-samsung master

for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:

MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)

----------------------------------------------------------------
Akshay Saraswat (2):
Exynos5: clock: Update the equation to calculate PLL output frequency
Exynos: uart: s5p: enabling the uart tx/rx fifo

Amar (9):
FDT: Add compatible string for DWMMC
EXYNOS5: FDT: Add DWMMC device node data
DWMMC: Initialise dwmci and resolve EMMC read write issues
EXYNOS5: DWMMC: Added FDT support for DWMMC
EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results.
SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
MMC: APIs to support resize of EMMC boot partition
SMDK5250: Enable EMMC booting
COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition

Arkadiusz Wlodarczyk (1):
arm:trats: change auto-booting to boot kernel with separate device tree blob

Inderpal Singh (3):
exynos: move tzpc_init to armv7/exynos
exynos: update tzpc to make it common for exynos4 and exynos5
exynos: Update origen and smdkv310 to use common tzpc_init

Quoted 7 lines

Naveen Krishna Chatradhi (2):
power: exynos-tmu: fix warnings and clean up code
power: exynos-tmu: use the mux_addr bit fields in tmu_control register

Rajeshwari Shinde (3):
SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
SMDK5250: Enable SPI Gigabyte device.

SPI gigabyte flash driver is not available in drivers/mtd/spi/ Am i missing anything here, please help.

--
Thanks,
Jagan.

Quoted 56 lines

MMC: DWMMC: Fix FIFO_DEPTH calculation

 arch/arm/cpu/armv7/exynos/Makefile                 |    2 +-
 arch/arm/cpu/armv7/exynos/clock.c                  |   10 +-
 .../arm/cpu/armv7/exynos/tzpc.c                    |   25 +-
 arch/arm/cpu/armv7/s5p-common/Makefile             |    2 +
 arch/arm/dts/exynos5250.dtsi                       |   33 ++
 arch/arm/include/asm/arch-exynos/cpu.h             |    4 +
 arch/arm/include/asm/arch-exynos/dwmmc.h           |   11 +-
 arch/arm/include/asm/arch-exynos/tmu.h             |   58 ++-
 arch/arm/include/asm/arch-exynos/tzpc.h            |   20 +
 board/samsung/dts/exynos5250-smdk5250.dts          |   24 ++
 board/samsung/origen/lowlevel_init.S               |   44 +-
 board/samsung/origen/origen_setup.h                |   25 --
 board/samsung/smdk5250/Makefile                    |    5 +-
 board/samsung/smdk5250/clock_init.c                |   18 +
 board/samsung/smdk5250/clock_init.h                |    5 +
 board/samsung/smdk5250/exynos5-dt.c                |  423 ++++++++++++++++++++
 board/samsung/smdk5250/lowlevel_init.S             |    2 +
 board/samsung/smdk5250/setup.h                     |   25 --
 board/samsung/smdk5250/smdk5250.c                  |  223 +++--------
 board/samsung/smdk5250/spl_boot.c                  |   64 ++-
 board/samsung/smdkv310/lowlevel_init.S             |   60 +--
 common/cmd_mmc.c                                   |  109 ++++-
 doc/device-tree-bindings/exynos/dwmmc.txt          |   54 +++
 drivers/mmc/dw_mmc.c                               |   27 +-
 drivers/mmc/exynos_dw_mmc.c                        |  127 +++++-
 drivers/mmc/mmc.c                                  |  134 +++++++
 drivers/mtd/spi/Makefile                           |    1 +
 drivers/mtd/spi/gigadevice.c                       |   81 ++++
 drivers/mtd/spi/spi_flash.c                        |    3 +
 drivers/mtd/spi/spi_flash_internal.h               |    1 +
 drivers/power/exynos-tmu.c                         |  123 +++---
 drivers/serial/serial_s5p.c                        |   13 +-
 drivers/video/exynos_fb.c                          |    4 +-
 include/configs/exynos5250-dt.h                    |   11 +-
 include/configs/origen.h                           |    2 +
 include/configs/smdkv310.h                         |    2 +
 include/configs/trats.h                            |   17 +-
 include/dwmmc.h                                    |    3 +
 include/fdtdec.h                                   |    1 +
 include/mmc.h                                      |   26 ++
 lib/fdtdec.c                                       |    1 +
 spl/Makefile                                       |    4 +
 42 files changed, 1356 insertions(+), 471 deletions(-)
 rename board/samsung/smdk5250/tzpc_init.c => arch/arm/cpu/armv7/exynos/tzpc.c (69%)
 create mode 100644 board/samsung/smdk5250/exynos5-dt.c
 create mode 100644 doc/device-tree-bindings/exynos/dwmmc.txt
 create mode 100644 drivers/mtd/spi/gigadevice.c

--
Thanks,
Minkyu Kang.
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

#2 lore raw

Hi Minkyu,

Quoted 43 lines · Jagan Teki
Quoted 42 lines · Minkyu Kang

Dear Albert,

The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:

at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)

are available in the git repository at:

git://git.denx.de/u-boot-samsung master

for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:

MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)

----------------------------------------------------------------
Akshay Saraswat (2):
Exynos5: clock: Update the equation to calculate PLL output frequency
Exynos: uart: s5p: enabling the uart tx/rx fifo

Amar (9):
FDT: Add compatible string for DWMMC
EXYNOS5: FDT: Add DWMMC device node data
DWMMC: Initialise dwmci and resolve EMMC read write issues
EXYNOS5: DWMMC: Added FDT support for DWMMC
EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results.
SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
MMC: APIs to support resize of EMMC boot partition
SMDK5250: Enable EMMC booting
COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition

Arkadiusz Wlodarczyk (1):
arm:trats: change auto-booting to boot kernel with separate device tree blob

Inderpal Singh (3):
exynos: move tzpc_init to armv7/exynos
exynos: update tzpc to make it common for exynos4 and exynos5
exynos: Update origen and smdkv310 to use common tzpc_init

Naveen Krishna Chatradhi (2):
power: exynos-tmu: fix warnings and clean up code
power: exynos-tmu: use the mux_addr bit fields in tmu_control register

Quoted 6 lines
Quoted 3 lines

Rajeshwari Shinde (3):
SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
SMDK5250: Enable SPI Gigabyte device.

SPI gigabyte flash driver is not available in drivers/mtd/spi/ Am i missing anything here, please help.

So, Minkyu, should I pick this PR or wait for an update?

Amicalement,

Signature · 1 line
Albert.
#3 lore raw
Quoted 54 lines · Albert ARIBAUD

Hi Minkyu,

Quoted 49 lines · Jagan Teki
Quoted 38 lines · Minkyu Kang

Dear Albert,

The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:

at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)

are available in the git repository at:

git://git.denx.de/u-boot-samsung master

for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:

MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)

----------------------------------------------------------------
Akshay Saraswat (2):
Exynos5: clock: Update the equation to calculate PLL output frequency
Exynos: uart: s5p: enabling the uart tx/rx fifo

Amar (9):
FDT: Add compatible string for DWMMC
EXYNOS5: FDT: Add DWMMC device node data
DWMMC: Initialise dwmci and resolve EMMC read write issues
EXYNOS5: DWMMC: Added FDT support for DWMMC
EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results.
SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
MMC: APIs to support resize of EMMC boot partition
SMDK5250: Enable EMMC booting
COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition

Arkadiusz Wlodarczyk (1):
arm:trats: change auto-booting to boot kernel with separate device tree blob

Inderpal Singh (3):
exynos: move tzpc_init to armv7/exynos
exynos: update tzpc to make it common for exynos4 and exynos5
exynos: Update origen and smdkv310 to use common tzpc_init

Quoted 7 lines

Naveen Krishna Chatradhi (2):
power: exynos-tmu: fix warnings and clean up code
power: exynos-tmu: use the mux_addr bit fields in tmu_control register

Rajeshwari Shinde (3):
SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
SMDK5250: Enable SPI Gigabyte device.

SPI gigabyte flash driver is not available in drivers/mtd/spi/ Am i missing anything here, please help.

gigabyte flash driver is available in drivers/mtd/spi/ please refer below link.
http://git.denx.de/?p=u-boot/u-boot-samsung.git;a=blob;f=drivers/mtd/spi/gigadevice.c;

Quoted 2 lines

So, Minkyu, should I pick this PR or wait for an update?

Please pick this PR.

Quoted 3 lines

Amicalement,

Thanks,
Minkyu Kang.

#7 lore raw
In reply to Minkyu Kang

Hi Minkyu,

Quoted 6 lines · Minkyu Kang

Dear Albert,

The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:

at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)

Quoted 7 lines

are available in the git repository at:

git://git.denx.de/u-boot-samsung master

for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:

MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)

I had three merge conflicts here, two solved automatically (files drivers/mmc/mmc.c and include/mmc.h) and one manually (spl/Makefile).

I have pushed the resulting branch as mastercandidate.

Please confirm that the resolutions are ok.

Amicalement,

Signature · 1 line
Albert.
#4 lore raw
In reply to Minkyu Kang
Quoted 53 lines · Minkyu Kang
Quoted 52 lines · Albert ARIBAUD

Hi Minkyu,

Quoted 47 lines · Jagan Teki
Quoted 45 lines · Minkyu Kang

Dear Albert,

The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:

at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)

are available in the git repository at:

git://git.denx.de/u-boot-samsung master

for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:

MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)

----------------------------------------------------------------
Akshay Saraswat (2):
Exynos5: clock: Update the equation to calculate PLL output frequency
Exynos: uart: s5p: enabling the uart tx/rx fifo

Amar (9):
FDT: Add compatible string for DWMMC
EXYNOS5: FDT: Add DWMMC device node data
DWMMC: Initialise dwmci and resolve EMMC read write issues
EXYNOS5: DWMMC: Added FDT support for DWMMC
EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results.
SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
MMC: APIs to support resize of EMMC boot partition
SMDK5250: Enable EMMC booting
COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition

Arkadiusz Wlodarczyk (1):
arm:trats: change auto-booting to boot kernel with separate device tree blob

Inderpal Singh (3):
exynos: move tzpc_init to armv7/exynos
exynos: update tzpc to make it common for exynos4 and exynos5
exynos: Update origen and smdkv310 to use common tzpc_init

Naveen Krishna Chatradhi (2):
power: exynos-tmu: fix warnings and clean up code
power: exynos-tmu: use the mux_addr bit fields in tmu_control register

Rajeshwari Shinde (3):
SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
SMDK5250: Enable SPI Gigabyte device.

Quoted 6 lines
Quoted 2 lines
Quoted 2 lines

SPI gigabyte flash driver is not available in drivers/mtd/spi/ Am i missing anything here, please help.

gigabyte flash driver is available in drivers/mtd/spi/ please refer below link.
http://git.denx.de/?p=u-boot/u-boot-samsung.git;a=blob;f=drivers/mtd/spi/gigadevice.c;

My question is the driver is not yet in main line, but patch " SMDK5250: Enable SPI Gigabyte device."
is enabling the driver CONFIG_* into smdk5250 configuration entries.

Is this valid, please correct me if am wrong.

--
Thanks,
Jagan.

Quoted 11 lines
Quoted 2 lines

So, Minkyu, should I pick this PR or wait for an update?

Please pick this PR.

Quoted 3 lines

Amicalement,

Thanks,
Minkyu Kang.

#5 lore raw

Hi Jagan,

Quoted 61 lines · Jagan Teki
Quoted 53 lines · Minkyu Kang
Quoted 52 lines · Albert ARIBAUD

Hi Minkyu,

Quoted 47 lines · Jagan Teki
Quoted 45 lines · Minkyu Kang

Dear Albert,

The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:

at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)

are available in the git repository at:

git://git.denx.de/u-boot-samsung master

for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:

MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)

----------------------------------------------------------------
Akshay Saraswat (2):
Exynos5: clock: Update the equation to calculate PLL output frequency
Exynos: uart: s5p: enabling the uart tx/rx fifo

Amar (9):
FDT: Add compatible string for DWMMC
EXYNOS5: FDT: Add DWMMC device node data
DWMMC: Initialise dwmci and resolve EMMC read write issues
EXYNOS5: DWMMC: Added FDT support for DWMMC
EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results.
SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
MMC: APIs to support resize of EMMC boot partition
SMDK5250: Enable EMMC booting
COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition

Arkadiusz Wlodarczyk (1):
arm:trats: change auto-booting to boot kernel with separate device tree blob

Inderpal Singh (3):
exynos: move tzpc_init to armv7/exynos
exynos: update tzpc to make it common for exynos4 and exynos5
exynos: Update origen and smdkv310 to use common tzpc_init

Naveen Krishna Chatradhi (2):
power: exynos-tmu: fix warnings and clean up code
power: exynos-tmu: use the mux_addr bit fields in tmu_control register

Rajeshwari Shinde (3):
SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
SMDK5250: Enable SPI Gigabyte device.

Quoted 6 lines
Quoted 2 lines
Quoted 2 lines

SPI gigabyte flash driver is not available in drivers/mtd/spi/ Am i missing anything here, please help.

gigabyte flash driver is available in drivers/mtd/spi/ please refer below link.
http://git.denx.de/?p=u-boot/u-boot-samsung.git;a=blob;f=drivers/mtd/spi/gigadevice.c;

Quoted 5 lines

My question is the driver is not yet in main line, but patch " SMDK5250: Enable SPI Gigabyte device."
is enabling the driver CONFIG_* into smdk5250 configuration entries.

Is this valid, please correct me if am wrong.

Doesn't patch "SMDK5250: Enable SPI Gigabyte device" immediately follow patch "SF: Add driver for Gigabyte device GD25LQ and GD25Q64B" which creates said device?

Quoted 3 lines

--
Thanks,
Jagan.

Amicalement,

Signature · 1 line
Albert.
#6 lore raw
Quoted 70 lines · Albert ARIBAUD

Hi Jagan,

Quoted 65 lines · Jagan Teki
Quoted 53 lines · Minkyu Kang
Quoted 52 lines · Albert ARIBAUD

Hi Minkyu,

Quoted 47 lines · Jagan Teki
Quoted 45 lines · Minkyu Kang

Dear Albert,

The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:

at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)

are available in the git repository at:

git://git.denx.de/u-boot-samsung master

for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:

MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)

----------------------------------------------------------------
Akshay Saraswat (2):
Exynos5: clock: Update the equation to calculate PLL output frequency
Exynos: uart: s5p: enabling the uart tx/rx fifo

Amar (9):
FDT: Add compatible string for DWMMC
EXYNOS5: FDT: Add DWMMC device node data
DWMMC: Initialise dwmci and resolve EMMC read write issues
EXYNOS5: DWMMC: Added FDT support for DWMMC
EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results.
SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
MMC: APIs to support resize of EMMC boot partition
SMDK5250: Enable EMMC booting
COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition

Arkadiusz Wlodarczyk (1):
arm:trats: change auto-booting to boot kernel with separate device tree blob

Inderpal Singh (3):
exynos: move tzpc_init to armv7/exynos
exynos: update tzpc to make it common for exynos4 and exynos5
exynos: Update origen and smdkv310 to use common tzpc_init

Naveen Krishna Chatradhi (2):
power: exynos-tmu: fix warnings and clean up code
power: exynos-tmu: use the mux_addr bit fields in tmu_control register

Rajeshwari Shinde (3):
SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
SMDK5250: Enable SPI Gigabyte device.

Quoted 6 lines
Quoted 2 lines
Quoted 2 lines

SPI gigabyte flash driver is not available in drivers/mtd/spi/ Am i missing anything here, please help.

gigabyte flash driver is available in drivers/mtd/spi/ please refer below link.
http://git.denx.de/?p=u-boot/u-boot-samsung.git;a=blob;f=drivers/mtd/spi/gigadevice.c;

My question is the driver is not yet in main line, but patch " SMDK5250: Enable SPI Gigabyte device."
is enabling the driver CONFIG_* into smdk5250 configuration entries.

Quoted 5 lines
Quoted 1 line

Is this valid, please correct me if am wrong.

Doesn't patch "SMDK5250: Enable SPI Gigabyte device" immediately follow patch "SF: Add driver for Gigabyte device GD25LQ and GD25Q64B" which creates said device?

OK I couldn't observer actual commit prefix for this gigabyte flash driver. May it could have sf: gigabyte:

Any way please continue-

--
Thanks,
Jagan.

Quoted 8 lines
Quoted 4 lines

--
Thanks,
Jagan.

Amicalement,
--
Albert.

#8 lore raw
In reply to Albert ARIBAUD
Quoted 17 lines · Albert ARIBAUD

Hi Minkyu,

Quoted 12 lines · Minkyu Kang

Dear Albert,

The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:

at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)

are available in the git repository at:

git://git.denx.de/u-boot-samsung master

for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:

Quoted 8 lines
Quoted 1 line

MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)

I had three merge conflicts here, two solved automatically (files drivers/mmc/mmc.c and include/mmc.h) and one manually (spl/Makefile).

I have pushed the resulting branch as mastercandidate.

Please confirm that the resolutions are ok.

It's good. confirmed.

Quoted 3 lines

Amicalement,

Thanks,
Minkyu Kang.

#9 lore raw
In reply to Minkyu Kang

Hi Minkyu,

Quoted 86 lines · Minkyu Kang

Dear Albert,

The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:

at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)

are available in the git repository at:

git://git.denx.de/u-boot-samsung master

for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:

MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)

----------------------------------------------------------------
Akshay Saraswat (2):
Exynos5: clock: Update the equation to calculate PLL output frequency
Exynos: uart: s5p: enabling the uart tx/rx fifo

Amar (9):
FDT: Add compatible string for DWMMC
EXYNOS5: FDT: Add DWMMC device node data
DWMMC: Initialise dwmci and resolve EMMC read write issues
EXYNOS5: DWMMC: Added FDT support for DWMMC
EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results.
SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT
MMC: APIs to support resize of EMMC boot partition
SMDK5250: Enable EMMC booting
COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition

Arkadiusz Wlodarczyk (1):
arm:trats: change auto-booting to boot kernel with separate device tree blob

Inderpal Singh (3):
exynos: move tzpc_init to armv7/exynos
exynos: update tzpc to make it common for exynos4 and exynos5
exynos: Update origen and smdkv310 to use common tzpc_init

Naveen Krishna Chatradhi (2):
power: exynos-tmu: fix warnings and clean up code
power: exynos-tmu: use the mux_addr bit fields in tmu_control register

Rajeshwari Shinde (3):
SF: Add driver for Gigabyte device GD25LQ and GD25Q64B
SMDK5250: Enable SPI Gigabyte device.
MMC: DWMMC: Fix FIFO_DEPTH calculation

 arch/arm/cpu/armv7/exynos/Makefile                 |    2 +-
 arch/arm/cpu/armv7/exynos/clock.c                  |   10 +-
 .../arm/cpu/armv7/exynos/tzpc.c                    |   25 +-
 arch/arm/cpu/armv7/s5p-common/Makefile             |    2 +
 arch/arm/dts/exynos5250.dtsi                       |   33 ++
 arch/arm/include/asm/arch-exynos/cpu.h             |    4 +
 arch/arm/include/asm/arch-exynos/dwmmc.h           |   11 +-
 arch/arm/include/asm/arch-exynos/tmu.h             |   58 ++-
 arch/arm/include/asm/arch-exynos/tzpc.h            |   20 +
 board/samsung/dts/exynos5250-smdk5250.dts          |   24 ++
 board/samsung/origen/lowlevel_init.S               |   44 +-
 board/samsung/origen/origen_setup.h                |   25 --
 board/samsung/smdk5250/Makefile                    |    5 +-
 board/samsung/smdk5250/clock_init.c                |   18 +
 board/samsung/smdk5250/clock_init.h                |    5 +
 board/samsung/smdk5250/exynos5-dt.c                |  423 ++++++++++++++++++++
 board/samsung/smdk5250/lowlevel_init.S             |    2 +
 board/samsung/smdk5250/setup.h                     |   25 --
 board/samsung/smdk5250/smdk5250.c                  |  223 +++--------
 board/samsung/smdk5250/spl_boot.c                  |   64 ++-
 board/samsung/smdkv310/lowlevel_init.S             |   60 +--
 common/cmd_mmc.c                                   |  109 ++++-
 doc/device-tree-bindings/exynos/dwmmc.txt          |   54 +++
 drivers/mmc/dw_mmc.c                               |   27 +-
 drivers/mmc/exynos_dw_mmc.c                        |  127 +++++-
 drivers/mmc/mmc.c                                  |  134 +++++++
 drivers/mtd/spi/Makefile                           |    1 +
 drivers/mtd/spi/gigadevice.c                       |   81 ++++
 drivers/mtd/spi/spi_flash.c                        |    3 +
 drivers/mtd/spi/spi_flash_internal.h               |    1 +
 drivers/power/exynos-tmu.c                         |  123 +++---
 drivers/serial/serial_s5p.c                        |   13 +-
 drivers/video/exynos_fb.c                          |    4 +-
 include/configs/exynos5250-dt.h                    |   11 +-
 include/configs/origen.h                           |    2 +
 include/configs/smdkv310.h                         |    2 +
 include/configs/trats.h                            |   17 +-
 include/dwmmc.h                                    |    3 +
 include/fdtdec.h                                   |    1 +
Quoted 8 lines
 include/mmc.h                                      |   26 ++
 lib/fdtdec.c                                       |    1 +
 spl/Makefile                                       |    4 +
 42 files changed, 1356 insertions(+), 471 deletions(-)
 rename board/samsung/smdk5250/tzpc_init.c => arch/arm/cpu/armv7/exynos/tzpc.c (69%)
 create mode 100644 board/samsung/smdk5250/exynos5-dt.c
 create mode 100644 doc/device-tree-bindings/exynos/dwmmc.txt
 create mode 100644 drivers/mtd/spi/gigadevice.c

Applied to u-boot-arm/master, thanks!

Amicalement,

Signature · 1 line
Albert.