Skip to contentSkip to conversation

PCAN drivers?

DISCUSSION Gary Thomas 3 participants 5 messages Jun 17, 2013 – Jun 18, 2013 CAN network drivers

lore
Share & tools
lore
#0 lore raw

What's the best driver for the Peak PCAN PCI board?
PEAK-System Technik GmbH PCAN-PCI CAN-Bus controller
I'm interested in linux-3.5.2 on Fedora 17

Thanks

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#1 lore raw
Quoted 3 lines · Gary Thomas

What's the best driver for the Peak PCAN PCI board?
PEAK-System Technik GmbH PCAN-PCI CAN-Bus controller
I'm interested in linux-3.5.2 on Fedora 17

The PEAK PCI should work out-of-the box with kernel version v3.2. The PCI Express Cards shoud work with v3.4.

regards,
Marc

Signature · 4 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |
#2 lore raw
Quoted 7 lines · Marc Kleine-Budde
Quoted 3 lines · Gary Thomas

What's the best driver for the Peak PCAN PCI board?
PEAK-System Technik GmbH PCAN-PCI CAN-Bus controller
I'm interested in linux-3.5.2 on Fedora 17

The PEAK PCI should work out-of-the box with kernel version v3.2. The PCI Express Cards shoud work with v3.4.

Thanks. What driver module do I need for this (none seem to come packaged with the Fedora kernel)?

What about the CAN utils (cansend, candump, etc)?

Sorry for the barrage of questions; I used this stuff years ago and time seems to have marched on whilst I had to do other things...

Signature · 4 lines
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------
#3 lore raw
Quoted 11 lines · Gary Thomas
Quoted 7 lines · Marc Kleine-Budde
Quoted 3 lines · Gary Thomas

What's the best driver for the Peak PCAN PCI board?
PEAK-System Technik GmbH PCAN-PCI CAN-Bus controller
I'm interested in linux-3.5.2 on Fedora 17

The PEAK PCI should work out-of-the box with kernel version v3.2. The PCI Express Cards shoud work with v3.4.

Thanks. What driver module do I need for this (none seem to come packaged with the Fedora kernel)?

It should be loaded automatically, it's called peak_pci.ko

Quoted 4 lines

What about the CAN utils (cansend, candump, etc)?

Sorry for the barrage of questions; I used this stuff years ago and time seems to have marched on whilst I had to do other things...

compile yourself:

https://gitorious.org/linux-can/can-utils

Marc

Signature · 4 lines
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |
#4 lore raw

I use the PCAN usb device.

On old systems < 3.4 I compile the source from peak systems.

On newer systems it is plug and play. If you used peak 'years ago' you probably used the chardev driver. You can still use this driver if you have software that requires it, but you will need compile the source with special -no-netdev switch, better to port your code and embrace the upstream driver :). The buildfiles contain a nice list of switches you can use.

Max Schnedier

Quoted 26 lines · Marc Kleine-Budde
Quoted 11 lines · Gary Thomas
Quoted 7 lines · Marc Kleine-Budde
Quoted 3 lines · Gary Thomas

What's the best driver for the Peak PCAN PCI board?
PEAK-System Technik GmbH PCAN-PCI CAN-Bus controller
I'm interested in linux-3.5.2 on Fedora 17

The PEAK PCI should work out-of-the box with kernel version v3.2. The PCI Express Cards shoud work with v3.4.

Thanks. What driver module do I need for this (none seem to come packaged with the Fedora kernel)?

It should be loaded automatically, it's called peak_pci.ko

Quoted 4 lines

What about the CAN utils (cansend, candump, etc)?

Sorry for the barrage of questions; I used this stuff years ago and time seems to have marched on whilst I had to do other things...

compile yourself:

https://gitorious.org/linux-can/can-utils

Marc