dfu: using dfu-util -l shows different output
Hello,
using "dfu-util -l" shows different output connecting to an am335x based board and using dfu_nand.c with current u-boot:
after resetting the board I get:
# dfu-util -l dfu-util 0.5
(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
(C) 2010-2011 Tormod Volden (DfuSe support)
This program is Free Software and has ABSOLUTELY NO WARRANTY
dfu-util does currently only support DFU version 1.0
Found Runtime: [0525:bd00] devnum=0, cfg=2, intf=0, alt=0, name="Device Firmware Upgrade" #
after a dfu transfer I see:
# dfu-util -l dfu-util 0.5
(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
(C) 2010-2011 Tormod Volden (DfuSe support)
This program is Free Software and has ABSOLUTELY NO WARRANTY
dfu-util does currently only support DFU version 1.0
Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=0, name="SPL" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=1, name="SPL.backup1" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=2, name="SPL.backup2" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=3, name="SPL.backup3" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=4, name="u-boot" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=5, name="kernel_a" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=6, name="kernel_b" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=7, name="rootfs" #
Which I expected ...
U-Boot environment variable:
U-Boot# print dfu_alt_info
dfu_alt_info=SPL part 0 1;SPL.backup1 part 0 2;SPL.backup2 part 0 3;SPL.backup3 part 0 4;u-boot part 0 5;kernel_a part 0 7;kernel_b part 0 8;rootfs part 0 10
U-Boot#
Is this a bug or a feature?
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Heiko,
I don't think the gadget is initialized before you issue a dfu call.
So that makes sense.
Let's wait until Tom wakes up and have an authoritative answer.
Regards
-- Pantelis
Quoted 57 lines · Heiko Schocher
Hello,
using "dfu-util -l" shows different output connecting to an am335x based board and using
dfu_nand.cwith current u-boot:after resetting the board I get:
# dfu-util -l dfu-util 0.5(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
(C) 2010-2011 Tormod Volden (DfuSe support)
This program is Free Software and has ABSOLUTELY NO WARRANTYdfu-util does currently only support DFU version 1.0
Found Runtime: [0525:bd00] devnum=0, cfg=2, intf=0, alt=0, name="Device Firmware Upgrade" #
after a dfu transfer I see:
# dfu-util -l dfu-util 0.5(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
(C) 2010-2011 Tormod Volden (DfuSe support)
This program is Free Software and has ABSOLUTELY NO WARRANTYdfu-util does currently only support DFU version 1.0
Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=0, name="SPL" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=1, name="SPL.backup1" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=2, name="SPL.backup2" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=3, name="SPL.backup3" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=4, name="u-boot" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=5, name="kernel_a" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=6, name="kernel_b" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=7, name="rootfs" #
Which I expected ...
U-Boot environment variable:
U-Boot# print
dfu_alt_info
dfu_alt_info=SPL part 0 1;SPL.backup1 part 0 2;SPL.backup2 part 0 3;SPL.backup3 part 0 4;u-boot part 0 5;kernel_a part 0 7;kernel_b part 0 8;rootfs part 0 10
U-Boot#Is this a bug or a feature?
bye,
HeikoSignature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Hello Pantelis,
Am 25.06.2013 10:16, schrieb Pantelis Antoniou:
Quoted 6 lines
Heiko,
I don't think the gadget is initialized before you issue a dfu call.
So that makes sense.
?
I call from the host "dfu-util -l" so the gadget on the board should do the answer ... or?
Quoted 1 line
Let's wait until Tom wakes up and have an authoritative answer.
Ok!
bye,
Heiko
Quoted 67 lines
Regards
-- Pantelis
Quoted 57 lines · Heiko Schocher
Hello,
using "dfu-util -l" shows different output connecting to an am335x based board and using
dfu_nand.cwith current u-boot:after resetting the board I get:
# dfu-util -l dfu-util 0.5(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
(C) 2010-2011 Tormod Volden (DfuSe support)
This program is Free Software and has ABSOLUTELY NO WARRANTYdfu-util does currently only support DFU version 1.0
Found Runtime: [0525:bd00] devnum=0, cfg=2, intf=0, alt=0, name="Device Firmware Upgrade" #
after a dfu transfer I see:
# dfu-util -l dfu-util 0.5(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
(C) 2010-2011 Tormod Volden (DfuSe support)
This program is Free Software and has ABSOLUTELY NO WARRANTYdfu-util does currently only support DFU version 1.0
Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=0, name="SPL" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=1, name="SPL.backup1" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=2, name="SPL.backup2" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=3, name="SPL.backup3" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=4, name="u-boot" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=5, name="kernel_a" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=6, name="kernel_b" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=7, name="rootfs" #
Which I expected ...
U-Boot environment variable:
U-Boot# print
dfu_alt_info
dfu_alt_info=SPL part 0 1;SPL.backup1 part 0 2;SPL.backup2 part 0 3;SPL.backup3 part 0 4;u-boot part 0 5;kernel_a part 0 7;kernel_b part 0 8;rootfs part 0 10
U-Boot#Is this a bug or a feature?
bye,
HeikoSignature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Hi Heiko,
Quoted 8 lines
Hello Pantelis,
Am 25.06.2013 10:16, schrieb Pantelis Antoniou:
Quoted 5 lines
Heiko,
I don't think the gadget is initialized before you issue a dfu call.
Quoted 6 lines
Quoted 1 line
So that makes sense.
?
I call from the host "dfu-util -l" so the gadget on the board should do the answer ... or?
The gadget is not initialized here (so the dfu-util -l shows no output).
After transfer it shows information about proper alt settings.
This is correct behaviour, but I had discussion about this with Tom and we agreed, that it would be nice to have "dfu-util -l" exporting from very beginning the alt setting information.
Frankly, I had too much other work to implement it.
However, I think, that it would be a very useful feature (e.g. to get alt settings layout at HOST to facilitate automated flashing).
Quoted 78 lines
Quoted 2 lines
Let's wait until Tom wakes up and have an authoritative answer.
Ok!
bye,
HeikoQuoted 68 lines
Regards
-- Pantelis
Quoted 58 lines · Heiko Schocher
Hello,
using "dfu-util -l" shows different output connecting to an am335x based board and using
dfu_nand.cwith current u-boot:after resetting the board I get:
# dfu-util -l dfu-util 0.5(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
(C) 2010-2011 Tormod Volden (DfuSe support)
This program is Free Software and has ABSOLUTELY NO WARRANTYdfu-util does currently only support DFU version 1.0
Found Runtime: [0525:bd00] devnum=0, cfg=2, intf=0, alt=0, name="Device Firmware Upgrade" #
after a dfu transfer I see:
# dfu-util -l dfu-util 0.5(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
(C) 2010-2011 Tormod Volden (DfuSe support)
This program is Free Software and has ABSOLUTELY NO WARRANTYdfu-util does currently only support DFU version 1.0
Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=0, name="SPL" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=1, name="SPL.backup1" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=2, name="SPL.backup2" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=3, name="SPL.backup3" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=4, name="u-boot" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=5, name="kernel_a" Found DFU:
[0525:bd00] devnum=0, cfg=2, intf=0, alt=6, name="kernel_b" Found
DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=7, name="rootfs" #Which I expected ...
U-Boot environment variable:
U-Boot# print
dfu_alt_info
dfu_alt_info=SPL part 0 1;SPL.backup1 part 0 2;SPL.backup2 part 0 3;SPL.backup3 part 0 4;u-boot part 0 5;kernel_a part 0 7;kernel_b part 0 8;rootfs part 0 10 U-Boot#Is this a bug or a feature?
bye,
HeikoSignature · 3 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Signature · 5 lines
Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
Hello Lukasz,
Am 25.06.2013 10:44, schrieb Lukasz Majewski:
Quoted 17 lines
Hi Heiko,
Quoted 8 lines
Hello Pantelis,
Am 25.06.2013 10:16, schrieb Pantelis Antoniou:
Quoted 5 lines
Heiko,
I don't think the gadget is initialized before you issue a dfu call.
Quoted 6 lines
Quoted 1 line
So that makes sense.
?
I call from the host "dfu-util -l" so the gadget on the board should do the answer ... or?
Quoted 8 lines
The gadget is not initialized here (so the dfu-util -l shows no output).
After transfer it shows information about proper alt settings.
This is correct behaviour, but I had discussion about this with Tom and we agreed, that it would be nice to have "dfu-util -l" exporting from very beginning the alt setting information.
Yes, I vote for this too. Connecting to a board, I first would do a "dfu-util -l" to look, what is possible to update here ...
Quoted 4 lines
Frankly, I had too much other work to implement it.
However, I think, that it would be a very useful feature (e.g. to get alt settings layout at HOST to facilitate automated flashing).
Hmm... I digged into the code, but not really found a place where I have to start. Can you give me a hint where to start? So maybe, I can do it?
Thanks!
bye,
Heiko
Quoted 80 lines
Quoted 77 lines
Quoted 1 line
Let's wait until Tom wakes up and have an authoritative answer.
Ok!
bye,
HeikoQuoted 68 lines
Regards
-- Pantelis
Quoted 58 lines · Heiko Schocher
Hello,
using "dfu-util -l" shows different output connecting to an am335x based board and using
dfu_nand.cwith current u-boot:after resetting the board I get:
# dfu-util -l dfu-util 0.5(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
(C) 2010-2011 Tormod Volden (DfuSe support)
This program is Free Software and has ABSOLUTELY NO WARRANTYdfu-util does currently only support DFU version 1.0
Found Runtime: [0525:bd00] devnum=0, cfg=2, intf=0, alt=0, name="Device Firmware Upgrade" #
after a dfu transfer I see:
# dfu-util -l dfu-util 0.5(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
(C) 2010-2011 Tormod Volden (DfuSe support)
This program is Free Software and has ABSOLUTELY NO WARRANTYdfu-util does currently only support DFU version 1.0
Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=0, name="SPL" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=1, name="SPL.backup1" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=2, name="SPL.backup2" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=3, name="SPL.backup3" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=4, name="u-boot" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=5, name="kernel_a" Found DFU:
[0525:bd00] devnum=0, cfg=2, intf=0, alt=6, name="kernel_b" Found
DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=7, name="rootfs" #Which I expected ...
U-Boot environment variable:
U-Boot# print
dfu_alt_info
dfu_alt_info=SPL part 0 1;SPL.backup1 part 0 2;SPL.backup2 part 0 3;SPL.backup3 part 0 4;u-boot part 0 5;kernel_a part 0 7;kernel_b part 0 8;rootfs part 0 10 U-Boot#Is this a bug or a feature?
bye,
HeikoSignature · 3 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Hi Heiko,
Quoted 33 lines
Hello Lukasz,
Am 25.06.2013 10:44, schrieb Lukasz Majewski:
Quoted 17 lines
Hi Heiko,
Quoted 8 lines
Hello Pantelis,
Am 25.06.2013 10:16, schrieb Pantelis Antoniou:
Quoted 5 lines
Heiko,
I don't think the gadget is initialized before you issue a dfu call.
Quoted 6 lines
Quoted 1 line
So that makes sense.
?
I call from the host "dfu-util -l" so the gadget on the board should do the answer ... or?
Quoted 8 lines
The gadget is not initialized here (so the dfu-util -l shows no output).
After transfer it shows information about proper alt settings.
This is correct behaviour, but I had discussion about this with Tom and we agreed, that it would be nice to have "dfu-util -l" exporting from very beginning the alt setting information.
Yes, I vote for this too. Connecting to a board, I first would do a "dfu-util -l" to look, what is possible to update here ...
Quoted 8 lines
Quoted 4 lines
Frankly, I had too much other work to implement it.
However, I think, that it would be a very useful feature (e.g. to get alt settings layout at HOST to facilitate automated flashing).
Hmm... I digged into the code, but not really found a place where I have to start. Can you give me a hint where to start? So maybe, I can do it?
The problem here is to switch:
f_dfu->usb_function.strings = dfu_strings | NULL; f_dfu->usb_function.hs_descriptors = f_dfu->function |
dfu_runtime_descs;
The trick here is to properly fill in hs USB descriptors to embed the alt settings strings.
dfu-util -l can read the alt settings when following patch is applied:
@@ -655,6 +656,7 @@ static int dfu_bind(struct usb_configuration *c, struct usb_function *f)
stringtab_dfu.strings = f_dfu->strings;
+ to_dfu_mode(f_dfu);
cdev->req->context = f_dfu;error:
Unfortunately this breaks normal dfu operation, since board hangs at "dfu mode".
It seems that after initialization dfu is at "runtime mode". In this time standard information via USB hs.descriptor and strings is exposed. Also during this time you call dfu-util -l (just after first DFU gadget initialization).
When we program the device, we issue dfu-util -a X -D .... Then we switch to "dfu mode" and replace USB descriptor's fields.
When we issue dfu-util -l afterwards, the updated descriptors are read.
Two important functions:
1. dfu_prepare_function - here we modify the usb descriptor
2. dfu_prepare_strings - here the detailed information about alt settings is read from DFU core.
Please ask if you need help. I think that change with descriptors shall receive good testing.
Quoted 88 lines
Thanks!
bye,
HeikoQuoted 81 lines
Quoted 78 lines
Quoted 1 line
Let's wait until Tom wakes up and have an authoritative answer.
Ok!
bye,
HeikoQuoted 69 lines
Regards
-- Pantelis
Quoted 59 lines · Heiko Schocher
Hello,
using "dfu-util -l" shows different output connecting to an am335x based board and using
dfu_nand.cwith current u-boot:after resetting the board I get:
# dfu-util -l dfu-util 0.5(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
(C) 2010-2011 Tormod Volden (DfuSe support)
This program is Free Software and has ABSOLUTELY NO WARRANTYdfu-util does currently only support DFU version 1.0
Found Runtime: [0525:bd00] devnum=0, cfg=2, intf=0, alt=0, name="Device Firmware Upgrade" #
after a dfu transfer I see:
# dfu-util -l dfu-util 0.5(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
(C) 2010-2011 Tormod Volden (DfuSe support)
This program is Free Software and has ABSOLUTELY NO WARRANTYdfu-util does currently only support DFU version 1.0
Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=0, name="SPL" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=1, name="SPL.backup1" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=2, name="SPL.backup2" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=3, name="SPL.backup3" Found DFU:
[0525:bd00] devnum=0, cfg=2, intf=0, alt=4, name="u-boot" Found
DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=5, name="kernel_a" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=6, name="kernel_b" Found DFU: [0525:bd00] devnum=0, cfg=2, intf=0, alt=7, name="rootfs" #Which I expected ...
U-Boot environment variable:
U-Boot# print
dfu_alt_info
dfu_alt_info=SPL part 0 1;SPL.backup1 part 0 2;SPL.backup2 part 0 3;SPL.backup3 part 0 4;u-boot part 0 5;kernel_a part 0 7;kernel_b part 0 8;rootfs part 0 10 U-Boot#Is this a bug or a feature?
bye,
HeikoSignature · 3 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Signature · 5 lines
Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
Hello Lukasz,
Am 25.06.2013 12:29, schrieb Lukasz Majewski:
Quoted 64 lines
Hi Heiko,
Quoted 33 lines
Hello Lukasz,
Am 25.06.2013 10:44, schrieb Lukasz Majewski:
Quoted 17 lines
Hi Heiko,
Quoted 8 lines
Hello Pantelis,
Am 25.06.2013 10:16, schrieb Pantelis Antoniou:
Quoted 5 lines
Heiko,
I don't think the gadget is initialized before you issue a dfu call.
Quoted 6 lines
Quoted 1 line
So that makes sense.
?
I call from the host "dfu-util -l" so the gadget on the board should do the answer ... or?
Quoted 8 lines
The gadget is not initialized here (so the dfu-util -l shows no output).
After transfer it shows information about proper alt settings.
This is correct behaviour, but I had discussion about this with Tom and we agreed, that it would be nice to have "dfu-util -l" exporting from very beginning the alt setting information.
Yes, I vote for this too. Connecting to a board, I first would do a "dfu-util -l" to look, what is possible to update here ...
Quoted 8 lines
Quoted 4 lines
Frankly, I had too much other work to implement it.
However, I think, that it would be a very useful feature (e.g. to get alt settings layout at HOST to facilitate automated flashing).
Hmm... I digged into the code, but not really found a place where I have to start. Can you give me a hint where to start? So maybe, I can do it?
The problem here is to switch:
f_dfu->usb_function.strings=dfu_strings| NULL;f_dfu->usb_function.hs_descriptors=f_dfu->function|
dfu_runtime_descs;The trick here is to properly fill in hs USB descriptors to embed the alt settings strings.
dfu-util -l can read the alt settings when following patch is applied:
(quoted diff) +1
-0@@ -655,6 +656,7 @@ static int dfu_bind(struct usb_configuration *c, struct usb_function *f) stringtab_dfu.strings = f_dfu->strings; + to_dfu_mode(f_dfu); cdev->req->context = f_dfu; error:
Quoted 2 lines
Unfortunately this breaks normal dfu operation, since board hangs at "dfu mode".
What do you mean with "normal dfu operation" ?
I just tried the following patch, and "dfu-util -l" and "dfu-util -a ... -D ..." works ...
drivers/usb/gadget/f_dfu.c +3 -0
@@ -653,6 +653,9 @@ static int dfu_bind(struct usb_configuration *c, struct usb_function *f) ->iInterface = id; } +to_dfu_mode (f_dfu); + f_dfu->dfu_state = DFU_STATE_dfuIDLE; + stringtab_dfu.strings = f_dfu->strings; cdev->req->context = f_dfu;
log on the host, where I use dfu-util:
after restart of the board:
[root at ts8 ~]# dfu-util -l
dfu-util 0.5
(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
(C) 2010-2011 Tormod Volden (DfuSe support)
This program is Free Software and has ABSOLUTELY NO WARRANTY
dfu-util does currently only support DFU version 1.0
Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=0, name="SPL"
Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=1, name="SPL.backup1" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=2, name="SPL.backup2" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=3, name="SPL.backup3" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=4, name="u-boot" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=5, name="kernel_a" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=6, name="kernel_b" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=7, name="rootfs" [root at ts8 ~]# dfu-util -a rootfs -D dxr2-org/dxr2.xx-release-image-UNKNOWN-dxr2.ubi dfu-util 0.5
(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
(C) 2010-2011 Tormod Volden (DfuSe support)
This program is Free Software and has ABSOLUTELY NO WARRANTY
dfu-util does currently only support DFU version 1.0
Opening DFU USB device... ID 0525:4a47
WARNING: Can not find cached DFU functional descriptor
Warning: Assuming DFU version 1.0
Run-time device DFU version 0100
Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=7, name="rootfs" Claiming USB DFU Interface...
Setting Alternate Setting #7 ...
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
Error obtaining cached DFU functional descriptor
DFU mode device DFU version 0110
Device returned transfer size 4096
No valid DFU suffix signature
Warning: File has no DFU suffix
bytes_per_hash=576716
Copying data from PC to DFU device
Starting download: [##################################################] finished! state(2) = dfuIDLE, status(0) = No error condition is present
Done!
[root at ts8 ~]# dfu-util -l
dfu-util 0.5
(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
(C) 2010-2011 Tormod Volden (DfuSe support)
This program is Free Software and has ABSOLUTELY NO WARRANTY
dfu-util does currently only support DFU version 1.0
Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=0, name="SPL" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=1, name="SPL.backup1" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=2, name="SPL.backup2" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=3, name="SPL.backup3" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=4, name="u-boot" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=5, name="kernel_a" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=6, name="kernel_b" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=7, name="rootfs" [root at ts8 ~]#
seems to me, that we should add
"f_dfu->dfu_state = DFU_STATE_dfuIDLE"
into to_dfu_mode() as, after all places where to_dfu_mode() is called f_dfu->dfu_state = DFU_STATE_dfuIDLE is set ...
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Hi Heiko,
Quoted 81 lines
Hello Lukasz,
Am 25.06.2013 12:29, schrieb Lukasz Majewski:
Quoted 65 lines
Hi Heiko,
Quoted 33 lines
Hello Lukasz,
Am 25.06.2013 10:44, schrieb Lukasz Majewski:
Quoted 17 lines
Hi Heiko,
Quoted 8 lines
Hello Pantelis,
Am 25.06.2013 10:16, schrieb Pantelis Antoniou:
Quoted 5 lines
Heiko,
I don't think the gadget is initialized before you issue a dfu call.
Quoted 6 lines
Quoted 1 line
So that makes sense.
?
I call from the host "dfu-util -l" so the gadget on the board should do the answer ... or?
Quoted 8 lines
The gadget is not initialized here (so the dfu-util -l shows no output).
After transfer it shows information about proper alt settings.
This is correct behaviour, but I had discussion about this with Tom and we agreed, that it would be nice to have "dfu-util -l" exporting from very beginning the alt setting information.
Yes, I vote for this too. Connecting to a board, I first would do a "dfu-util -l" to look, what is possible to update here ...
Quoted 8 lines
Quoted 4 lines
Frankly, I had too much other work to implement it.
However, I think, that it would be a very useful feature (e.g. to get alt settings layout at HOST to facilitate automated flashing).
Hmm... I digged into the code, but not really found a place where I have to start. Can you give me a hint where to start? So maybe, I can do it?
The problem here is to switch:
f_dfu->usb_function.strings=dfu_strings| NULL;f_dfu->usb_function.hs_descriptors=f_dfu->function|
dfu_runtime_descs;The trick here is to properly fill in hs USB descriptors to embed the alt settings strings.
dfu-util -l can read the alt settings when following patch is applied:
(quoted diff) +1
-0@@ -655,6 +656,7 @@ static int dfu_bind(struct usb_configuration *c, struct usb_function *f) stringtab_dfu.strings = f_dfu->strings; + to_dfu_mode(f_dfu); cdev->req->context = f_dfu; error:Quoted 2 lines
Unfortunately this breaks normal dfu operation, since board hangs at "dfu mode".
What do you mean with "normal dfu operation" ?
I just tried the following patch, and "dfu-util -l" and "dfu-util -a ... -D ..." works ...
drivers/usb/gadget/f_dfu.c +0
-0
drivers/usb/gadget/f_dfu.c static int dfu_bind(struct usb_configuration *c, · line 657
Quoted 5 lines
drivers/usb/gadget/f_dfu.c +2
-0@@ -653,6 +653,9 @@ static int dfu_bind(struct usb_configuration *c, struct usb_function *f) ->iInterface = id; } +to_dfu_mode (f_dfu); + f_dfu->dfu_state = DFU_STATE_dfuIDLE;
^^^^^ = this is what I was missing.
Quoted 75 lines
drivers/usb/gadget/f_dfu.c +1
-0+ stringtab_dfu.strings = f_dfu->strings; cdev->req->context = f_dfu;log on the host, where I use dfu-util:
after restart of the board:
[root at ts8 ~]# dfu-util -l
dfu-util 0.5(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
(C) 2010-2011 Tormod Volden (DfuSe support)
This program is Free Software and has ABSOLUTELY NO WARRANTYdfu-util does currently only support DFU version 1.0
Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=0, name="SPL" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=1, name="SPL.backup1" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=2, name="SPL.backup2" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=3, name="SPL.backup3" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=4, name="u-boot" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=5, name="kernel_a" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=6, name="kernel_b" Found DFU:
[0525:4a47] devnum=0, cfg=2, intf=0, alt=7, name="rootfs" [root at ts8 ~]# dfu-util -a rootfs -D dxr2-org/dxr2.xx-release-image-UNKNOWN-dxr2.ubi dfu-util 0.5(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
(C) 2010-2011 Tormod Volden (DfuSe support)
This program is Free Software and has ABSOLUTELY NO WARRANTYdfu-util does currently only support DFU version 1.0
Opening DFU USB device... ID 0525:4a47
WARNING: Can not find cached DFU functional descriptor
Warning: Assuming DFU version 1.0
Run-time device DFU version 0100
Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=7, name="rootfs" Claiming USB DFU Interface...
Setting Alternate Setting #7 ...
Determining device status: state = dfuIDLE, status = 0 dfuIDLE, continuing
Error obtaining cached DFU functional descriptor
DFU mode device DFU version 0110
Device returned transfer size 4096
No valid DFU suffix signature
Warning: File has no DFU suffix
bytes_per_hash=576716
Copying data from PC to DFU device
Starting download:
[##################################################] finished! state(2) = dfuIDLE, status(0) = No error condition is present Done! [root at ts8 ~]# dfu-util -l
dfu-util 0.5(C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko Inc.
(C) 2010-2011 Tormod Volden (DfuSe support)
This program is Free Software and has ABSOLUTELY NO WARRANTYdfu-util does currently only support DFU version 1.0
Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=0, name="SPL" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=1, name="SPL.backup1" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=2, name="SPL.backup2" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=3, name="SPL.backup3" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=4, name="u-boot" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=5, name="kernel_a" Found DFU: [0525:4a47] devnum=0, cfg=2, intf=0, alt=6, name="kernel_b" Found DFU:
[0525:4a47] devnum=0, cfg=2, intf=0, alt=7, name="rootfs" [root at ts8 ~]#
Quoted 5 lines
seems to me, that we should add
"
f_dfu->dfu_state=DFU_STATE_dfuIDLE"
intoto_dfu_mode()as, after all places whereto_dfu_mode()is calledf_dfu->dfu_state=DFU_STATE_dfuIDLEis set ...
Yes, indeed. This seems as a good solution.
Quoted 3 lines
bye,
Heiko
Signature · 5 lines
Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group