MPC8272ADS and uboot program check
Hi to all,
After some days working ok with my MPC8272ADS board, now it keeps rebooting all the time with a Program Check report. It has arrived after a hang.
I have been checking the output as this is all the information i have at the moment. I have realized that clock reporting is incoherent (the true one is cpu_clk=400Mhz), so i wonder if it has any relation.
Any idea?
The output I get is:
U-Boot 1.0.0 (Jun 30 2004 - 20:20:47)
MPC8272 Reset Status: Check Stop, External Soft, External Hard
MPC8272 Clock Configuration
- Bus-to-Core Mult 4x, VCO Div 2, 60x Bus Freq 25-75 , Core Freq 100-300
- dfbrg 1, corecnf 0x0a, busdf 3, cpmdf 1, plldf 0, pllmf 3
- vco_out 400000000, scc_clk 100000000, brg_clk 25000000 - cpu_clk 400000000, cpm_clk 200000000, bus_clk 100000000
CPU: MPC8272 (HiP7 Rev 13, Mask 0.1 0K50M) at 18.382000 MHz
Board: Motorola MPC8272ADS
I2C: ready
DRAM: 64 MB
?rT?rT?r\?r\?rd?rd?rl?rl?rt?rt?r|?r|?r
?r?r?r?r?r?r?r?r??r??r??r??r??r??r??r??r?? r??r??r??r??r??r??r??r??r??r??r??r??r??r??r??r?r?r
?r
?r?r?r?r?r$?r$?r,?r,?r4?r4?r <?r<?rD?rD?rL?rL?rT?rT?r\?r\?rd?rd?rl?rl?rt?rt?r|?r|?r
?r
?r?r?r?r?r?r?r??r??r??r? ?r??r??r??r??r??r??r??r??r??r??r??r??r??r??r??r??r??r??r??r??r?r?r
?r
?r?r?r?r?r$?
r$?r,?r,?r4?r4?r<?r<?rD?rD?rL?rL?rT?rT 8 MB
*** Warning - bad CRC, using default environment
pci init start-----pci init end
In: serial Out: serial Err: serial NIP: 03F968D8 XER: 20000000 LR: 03FB621C REGS: 03f3fdd8 TRAP: 0700 DAR:
03FB5374
MSR: 00083002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00
GPR00: CCC0E043 03F3FEC8 E7FFFFFF 00000001 00000000 00000010 000003A0 000003C4
GPR08: 00000264 B0FFFFFB 03FC86D0 001A6306 48002024 E7FFF3BF 03FC8000 058A0000
GPR16: FBFF9F7B FF7FFFED 00000000 FE729328 00003002 00000001 00000000 03FA3098
GPR24: 03FA390C 00000000 00000010 00000000 00000000 03F3FF64 00000020 F0010D40
Call backtrace:
Program Check Exception
Quoted 7 lines · In message <[email protected]> you…
After some days working ok with my MPC8272ADS board, now it keeps rebooting all the time with a Program Check report. It has arrived after a hang.
I have been checking the output as this is all the information i have at the moment. I have realized that clock reporting is incoherent (the true one is cpu_clk=400Mhz), so i wonder if it has any relation.
Looks like broken hardware to me. ESD?
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
You Don't Have To Be 'Damned' To Work Here, But It Helps!!!
- Terry Pratchett, _Eric_Quoted 8 lines
Quoted 6 lines
After some days working ok with my MPC8272ADS board, now it keeps rebooting all the time with a Program Check report. It has arrived after a hang.
I have been checking the output as this is all the information i have at the moment. I have realized that clock reporting is incoherent (the true one is cpu_clk=400Mhz), so i wonder if it has any relation.
Quoted 5 lines
Looks like broken hardware to me. ESD?
Best regards,
Wolfgang Denk
I get the same thing when I mount a new MPC8272 part labled:
MPC8272ZQTIEA
400/200/100 MHZ
I wonder if the PVR value has changed for newer chips.
U-Boot 1.1.2 (Sep 8 2004 - 13:02:09)
MPC8272 Reset Status: External Soft, External Hard
MPC8272 Clock Configuration
- Bus-to-Core Mult 3.5x, VCO Div 2, 60x Bus Freq 30-85 , Core Freq 100-300
- dfbrg 1, corecnf 0x1e, busdf 3, cpmdf 1, plldf 0, pllmf 3
- vco_out 800000000, scc_clk 200000000, brg_clk 50000000 - cpu_clk 350000000, cpm_clk 400000000, bus_clk 100000000 - pci_clk 133333333
CPU: ### ERROR ### Please RESET the board ###
My old part gives:
U-Boot 1.1.2 (Sep 8 2004 - 13:02:09)
MPC8272 Reset Status: Check Stop, External Soft, External Hard
MPC8272 Clock Configuration
- Bus-to-Core Mult 3.5x, VCO Div 2, 60x Bus Freq 30-85 , Core Freq 100-300
- dfbrg 1, corecnf 0x0e, busdf 3, cpmdf 1, plldf 0, pllmf 3
- vco_out 400000000, scc_clk 100000000, brg_clk 25000000 - cpu_clk 350000000, cpm_clk 200000000, bus_clk 100000000
- pci_clk 66666666
CPU: MPC8272 (HiP7 Rev 13, Mask 0.0 0K50M) at 350 MHz Board: Motorola MPC8272ADS DRAM: 64 MB FLASH: 8 MB
*** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Net: FCC2 ETHERNET Hit any key to stop autoboot: 0
=>
- dan
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Dan Poirot writes:
Dan> I get the same thing
It's not the same. This error message (CPU: ### ERROR ### Please RESET the board ###) means that the chip is not recognised. There is no program exception.
Dan> when I mount a new MPC8272 part labled: MPC8272ZQTIEA Dan> 400/200/100 MHZ
Dan> I wonder if the PVR value has changed for newer chips.
Yes, it has. You can see it at Freescale Web site.
Signature · 4 lines
======================================================================== Yuli Barcohen | Phone +972-9-765-1788 | Software Project Leader yuli at arabellasw.com | Fax +972-9-765-7494 | Arabella Software, Israel ========================================================================
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Bastos Fernandez Alexandre writes:
Bastos> Hi to all, After some days working ok with my MPC8272ADS Bastos> board, now it keeps rebooting all the time with a Program Bastos> Check report. It has arrived after a hang.
Bastos> I have been checking the output as this is all the Bastos> information i have at the moment. I have realized that clock Bastos> reporting is incoherent (the true one is cpu_clk=400Mhz), so Bastos> i wonder if it has any relation.
Bastos> Any idea?
Bastos> The output I get is:
Bastos> U-Boot 1.0.0 (Jun 30 2004 - 20:20:47)
Is it your private port of U-Boot to 8272? If so, the problem can be in H/W initialisation. U-Boot supports this family and MPC8272ADS since version 1.1.1. I work with it on daily basis without any problems.
Signature · 4 lines
======================================================================== Yuli Barcohen | Phone +972-9-765-1788 | Software Project Leader yuli at arabellasw.com | Fax +972-9-765-7494 | Arabella Software, Israel ========================================================================