Add support for Newflow NanoBone board

NanoBone Specification:
-----------------------
CPU:
TI AM335x

Memory:
256MB DDR3
128MB NOR flash
128KB FRAM

Ethernet:
2 x 10/100 connected to SMSC LAN8710 PHY

USB:
1 x USB2.0 Type A

I2C:
2Kbit EEPROM (Microchip 24AA02)
RTC (Maxim DS1338)
GPIO Expander (Microchip MCP23017)

Expansion connector:
6 x UART
1 x MMC/SD
1 x USB2.0

---
Changes in v2:
- Reworked to use existing device nodes as suggested by Javier

 MAINTAINERS                       |    6 +
 arch/arm/boot/dts/Makefile        |    1 +
 arch/arm/boot/dts/am335x-nano.dts |  401 +++++++++++++++++++++++++++++++++++++
 3 files changed, 408 insertions(+)
 create mode 100644 arch/arm/boot/dts/am335x-nano.dts

index 9705318..7549e99 100644
@@ -5998,6 +5998,12 @@ L:	[email protected]
 S:	Maintained
 F:	drivers/gpio/gpio-omap.c
 
+OMAP/NEWFLOW NANOBONE MACHINE SUPPORT
+M:	Mark Jackson <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	arch/arm/boot/dts/am335x-nano.dts
+
 OMFS FILESYSTEM
 M:	Bob Copeland <[email protected]>
 L:	[email protected]

index 641b3c9..0d99a55 100644
@@ -171,6 +171,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	am335x-evm.dtb \
 	am335x-evmsk.dtb \
 	am335x-bone.dtb \
+	am335x-nano.dtb \
 	am3517-evm.dtb \
 	am3517_mt_ventoux.dtb \
 	am43x-epos-evm.dtb

1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Any comments on this patch set ?