Pull request - arm/zynq v2

U-Boot Michal Simek 3 participants 3 messages Aug 12, 2013 – Aug 18, 2013 1 message not in the archive

lore

Share & tools

lore

Michal Simek

author

2013-08-12 07:05 UTC #1 lore raw

In reply to a message not in the archive

Hi Albert,

please pull these 3 zynq patches to your arm tree.

There is still pending the arm: lds: Remove libgcc eabi exception handling tables patch. Have you considered to also add it?

v2:
- Changed email address,
- There was incorrect rebase which I have fixed - correct sha1 now

Thanks.
Michal

The following changes since commit a78dac79ede7fbb4c9e816abc879655540c3f076:

nds32: fix the missing COBJS-y change (2013-08-09 01:51:24 +0800)

are available in the git repository at:

git://www.denx.de/git/u-boot-microblaze.git zynq

for you to fetch changes up to 2d83d33a51926d6471eb9282d03d83783850d565:

zynq: Enable axi ethernet and emaclite driver initialization (2013-08-12 08:59:56 +0200)

----------------------------------------------------------------
Michal Simek (3):
zynq: Add new ddrc driver for ECC support
zynq: slcr: Wait 100ms till clk is properly setup
zynq: Enable axi ethernet and emaclite driver initialization

 arch/arm/cpu/armv7/zynq/Makefile           |  1 +
 arch/arm/cpu/armv7/zynq/ddrc.c             | 50 ++++++++++++++++++++++++++++++
 arch/arm/cpu/armv7/zynq/slcr.c             |  2 +-
 arch/arm/include/asm/arch-zynq/hardware.h  |  8 +++++
 arch/arm/include/asm/arch-zynq/sys_proto.h |  1 +
 board/xilinx/zynq/board.c                  | 19 ++++++++++++
 6 files changed, 80 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/cpu/armv7/zynq/ddrc.c

Signature · 14 lines

Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130812/013814c9/attachment.pgp>

Albert ARIBAUD

2013-08-17 15:42 UTC #2 lore raw

Hi Michal,

Quoted 33 lines · Michal Simek

Hi Albert,
please pull these 3 zynq patches to your arm tree.
There is still pending the arm: lds: Remove libgcc eabi exception handling tables patch. Have you considered to also add it?
v2:
- Changed email address,
- There was incorrect rebase which I have fixed - correct sha1 now
Thanks.
Michal
The following changes since commit a78dac79ede7fbb4c9e816abc879655540c3f076:
nds32: fix the missing COBJS-y change (2013-08-09 01:51:24 +0800)
are available in the git repository at:
git://www.denx.de/git/u-boot-microblaze.git zynq
for you to fetch changes up to 2d83d33a51926d6471eb9282d03d83783850d565:
zynq: Enable axi ethernet and emaclite driver initialization (2013-08-12 08:59:56 +0200)
----------------------------------------------------------------
Michal Simek (3):
zynq: Add new ddrc driver for ECC support
zynq: slcr: Wait 100ms till clk is properly setup
zynq: Enable axi ethernet and emaclite driver initialization

Quoted 8 lines

 arch/arm/cpu/armv7/zynq/Makefile           |  1 +
 arch/arm/cpu/armv7/zynq/ddrc.c             | 50 ++++++++++++++++++++++++++++++
 arch/arm/cpu/armv7/zynq/slcr.c             |  2 +-
 arch/arm/include/asm/arch-zynq/hardware.h  |  8 +++++
 arch/arm/include/asm/arch-zynq/sys_proto.h |  1 +
 board/xilinx/zynq/board.c                  | 19 ++++++++++++
 6 files changed, 80 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/cpu/armv7/zynq/ddrc.c

I cannot merge these three commits without merging a lot of nds32 stuff too, apparently, and I don't want to. If this stuff is not needed for the three commits, then please rebase them so that they don't pull anything else in.

Amicalement,

Signature · 1 line

Albert.

Tom Rini

2013-08-18 15:26 UTC #3 lore raw

Quoted 47 lines · Albert ARIBAUD

Hi Michal,
Quoted 33 lines · Michal Simek
Hi Albert,
please pull these 3 zynq patches to your arm tree.
There is still pending the arm: lds: Remove libgcc eabi exception handling tables patch. Have you considered to also add it?
v2:
- Changed email address,
- There was incorrect rebase which I have fixed - correct sha1 now
Thanks.
Michal
The following changes since commit a78dac79ede7fbb4c9e816abc879655540c3f076:
nds32: fix the missing COBJS-y change (2013-08-09 01:51:24 +0800)
are available in the git repository at:
git://www.denx.de/git/u-boot-microblaze.git zynq
for you to fetch changes up to 2d83d33a51926d6471eb9282d03d83783850d565:
zynq: Enable axi ethernet and emaclite driver initialization (2013-08-12 08:59:56 +0200)
----------------------------------------------------------------
Michal Simek (3):
zynq: Add new ddrc driver for ECC support
zynq: slcr: Wait 100ms till clk is properly setup
zynq: Enable axi ethernet and emaclite driver initialization
Quoted 8 lines
 arch/arm/cpu/armv7/zynq/Makefile           |  1 +
 arch/arm/cpu/armv7/zynq/ddrc.c             | 50 ++++++++++++++++++++++++++++++
 arch/arm/cpu/armv7/zynq/slcr.c             |  2 +-
 arch/arm/include/asm/arch-zynq/hardware.h  |  8 +++++
 arch/arm/include/asm/arch-zynq/sys_proto.h |  1 +
 board/xilinx/zynq/board.c                  | 19 ++++++++++++
 6 files changed, 80 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/cpu/armv7/zynq/ddrc.c

Quoted 4 lines

I cannot merge these three commits without merging a lot of nds32 stuff too, apparently, and I don't want to. If this stuff is not needed for the three commits, then please rebase them so that they don't pull anything else in.

Alternatively, can I get a pull request for nds32? Thanks!

Signature · 8 lines

Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130818/216a01f8/attachment.pgp>