please pull u-boot-samsung master
Dear Albert,
The following changes since commit 9ed887caecb9ecb0c68773a1870d143b9f28d3da:
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-08-17 18:24:13 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-samsung master
for you to fetch changes up to 812d7576cdbecc12d7eec7b533333d3a4a06234b:
drivers:power:max77686: add function to set voltage and mode (2013-08-30 12:24:54 +0900)
----------------------------------------------------------------
Chander Kashyap (2):
CONFIG: EXYNOS5: Replace misnomer SMDK5250 with EXYNOS5250 and update Makefiles
exynos5250: Add arndale board support
Inderpal Singh (1):
exynos5250: arndale: Add mmc support
Minkyu Kang (2):
arm: smdkc100: remove config.mk file
arm: goni: remove config.mk file
Piotr Wilczek (2):
arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12 drivers:power:max77686: add function to set voltage and mode
MAINTAINERS | 4 + Makefile | 2 +- arch/arm/include/asm/arch-exynos/gpio.h | 17 +- board/samsung/arndale/Makefile | 34 ++++ board/samsung/arndale/arndale.c | 101 ++++++++++++ board/samsung/arndale/arndale_spl.c | 50 ++++++ board/samsung/dts/exynos5250-arndale.dts | 39 +++++ board/samsung/goni/config.mk | 18 --- board/samsung/smdkc100/config.mk | 16 -- boards.cfg | 1 + drivers/power/pmic/pmic_max77686.c | 192 ++++++++++++++++++++++ include/configs/arndale.h | 255 ++++++++++++++++++++++++++++++ include/configs/exynos5250-dt.h | 2 +- include/configs/s5p_goni.h | 3 + include/configs/smdkc100.h | 3 + include/power/max77686_pmic.h | 26 +++ tools/Makefile | 4 +- 17 files changed, 725 insertions(+), 42 deletions(-) create mode 100644 board/samsung/arndale/Makefile create mode 100644 board/samsung/arndale/arndale.c create mode 100644 board/samsung/arndale/arndale_spl.c create mode 100644 board/samsung/dts/exynos5250-arndale.dts delete mode 100644 board/samsung/goni/config.mk delete mode 100644 board/samsung/smdkc100/config.mk create mode 100644 include/configs/arndale.h
Signature · 2 lines
Thanks, Minkyu Kang.
Hi Minkyu,
Quoted 48 lines · Minkyu Kang
Dear Albert,
The following changes since commit
9ed887caecb9ecb0c68773a1870d143b9f28d3da:Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-08-17 18:24:13 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-samsungmasterfor you to fetch changes up to
812d7576cdbecc12d7eec7b533333d3a4a06234b:drivers:power:max77686: add function to set voltage and mode (2013-08-30 12:24:54 +0900)
----------------------------------------------------------------
Chander Kashyap (2):
CONFIG: EXYNOS5: Replace misnomer SMDK5250 with EXYNOS5250 and update Makefiles
exynos5250: Add arndale board supportInderpal Singh (1):
exynos5250: arndale: Add mmc supportMinkyu Kang (2):
arm: smdkc100: remove config.mk file
arm: goni: remove config.mk filePiotr Wilczek (2):
arm:exynos:gpio: fixs5p_gpio_part_maxfor exynos4x12 drivers:power:max77686: add function to set voltage and modeMAINTAINERS | 4 + Makefile | 2 +- arch/arm/include/asm/arch-exynos/gpio.h | 17 +- board/samsung/arndale/Makefile | 34 ++++ board/samsung/arndale/arndale.c | 101 ++++++++++++ board/samsung/arndale/arndale_spl.c | 50 ++++++ board/samsung/dts/exynos5250-arndale.dts | 39 +++++ board/samsung/goni/config.mk | 18 --- board/samsung/smdkc100/config.mk | 16 -- boards.cfg | 1 + drivers/power/pmic/pmic_max77686.c | 192 ++++++++++++++++++++++ include/configs/arndale.h | 255 ++++++++++++++++++++++++++++++ include/configs/exynos5250-dt.h | 2 +- include/configs/s5p_goni.h | 3 + include/configs/smdkc100.h | 3 + include/power/max77686_pmic.h | 26 +++ tools/Makefile | 4 +-
Quoted 8 lines
17 files changed, 725 insertions(+), 42 deletions(-) create mode 100644 board/samsung/arndale/Makefile create mode 100644 board/samsung/arndale/arndale.c create mode 100644 board/samsung/arndale/arndale_spl.c create mode 100644 board/samsung/dts/exynos5250-arndale.dts delete mode 100644 board/samsung/goni/config.mk delete mode 100644 board/samsung/smdkc100/config.mk create mode 100644 include/configs/arndale.h
Fails for arndale:
Error: /home/albert/src/u-boot-arm/board/samsung/dts/exynos5250-arndale.dts:11.2-9 syntax error
My dtc -v: "Version: DTC 1.4.0", built from source.
Amicalement,
Signature · 1 line
Albert.
Hi Albert,
Quoted 62 lines · Albert ARIBAUD
Hi Minkyu,
Quoted 48 lines · Minkyu Kang
Dear Albert,
The following changes since commit
9ed887caecb9ecb0c68773a1870d143b9f28d3da:Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-08-17 18:24:13 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-samsungmasterfor you to fetch changes up to
812d7576cdbecc12d7eec7b533333d3a4a06234b:drivers:power:max77686: add function to set voltage and mode (2013-08-30 12:24:54 +0900)
----------------------------------------------------------------
Chander Kashyap (2):
CONFIG: EXYNOS5: Replace misnomer SMDK5250 with EXYNOS5250 and update Makefiles
exynos5250: Add arndale board supportInderpal Singh (1):
exynos5250: arndale: Add mmc supportMinkyu Kang (2):
arm: smdkc100: remove config.mk file
arm: goni: remove config.mk filePiotr Wilczek (2):
arm:exynos:gpio: fixs5p_gpio_part_maxfor exynos4x12 drivers:power:max77686: add function to set voltage and modeMAINTAINERS | 4 + Makefile | 2 +- arch/arm/include/asm/arch-exynos/gpio.h | 17 +- board/samsung/arndale/Makefile | 34 ++++ board/samsung/arndale/arndale.c | 101 ++++++++++++ board/samsung/arndale/arndale_spl.c | 50 ++++++ board/samsung/dts/exynos5250-arndale.dts | 39 +++++ board/samsung/goni/config.mk | 18 --- board/samsung/smdkc100/config.mk | 16 -- boards.cfg | 1 + drivers/power/pmic/pmic_max77686.c | 192 ++++++++++++++++++++++ include/configs/arndale.h | 255 ++++++++++++++++++++++++++++++ include/configs/exynos5250-dt.h | 2 +- include/configs/s5p_goni.h | 3 + include/configs/smdkc100.h | 3 + include/power/max77686_pmic.h | 26 +++ tools/Makefile | 4 +-Quoted 8 lines
17 files changed, 725 insertions(+), 42 deletions(-) create mode 100644 board/samsung/arndale/Makefile create mode 100644 board/samsung/arndale/arndale.c create mode 100644 board/samsung/arndale/arndale_spl.c create mode 100644 board/samsung/dts/exynos5250-arndale.dts delete mode 100644 board/samsung/goni/config.mk delete mode 100644 board/samsung/smdkc100/config.mk create mode 100644 include/configs/arndale.h
Quoted 6 lines
Fails for arndale:
Error: /home/albert/src/u-boot-arm/board/samsung/dts/exynos5250-arndale.dts:11.2-9 syntax error
My dtc -v: "Version: DTC 1.4.0", built from source.
Its working for me.
But my dtc -v: "Version: DTC 1.3.0"
Quoted 8 lines
Amicalement,
--
Albert.
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signature · 2 lines
with warm regards, Chander Kashyap
Quoted 67 lines · Chander Kashyap
Hi Albert,
Quoted 64 lines · Albert ARIBAUD
Hi Minkyu,
Quoted 48 lines · Minkyu Kang
Dear Albert,
The following changes since commit
9ed887caecb9ecb0c68773a1870d143b9f28d3da:Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' (2013-08-17 18:24:13 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-samsungmasterfor you to fetch changes up to
812d7576cdbecc12d7eec7b533333d3a4a06234b:drivers:power:max77686: add function to set voltage and mode (2013-08-30 12:24:54 +0900)
----------------------------------------------------------------
Chander Kashyap (2):
CONFIG: EXYNOS5: Replace misnomer SMDK5250 with EXYNOS5250 and update Makefiles
exynos5250: Add arndale board supportInderpal Singh (1):
exynos5250: arndale: Add mmc supportMinkyu Kang (2):
arm: smdkc100: remove config.mk file
arm: goni: remove config.mk filePiotr Wilczek (2):
arm:exynos:gpio: fixs5p_gpio_part_maxfor exynos4x12 drivers:power:max77686: add function to set voltage and modeMAINTAINERS | 4 + Makefile | 2 +- arch/arm/include/asm/arch-exynos/gpio.h | 17 +- board/samsung/arndale/Makefile | 34 ++++ board/samsung/arndale/arndale.c | 101 ++++++++++++ board/samsung/arndale/arndale_spl.c | 50 ++++++ board/samsung/dts/exynos5250-arndale.dts | 39 +++++ board/samsung/goni/config.mk | 18 --- board/samsung/smdkc100/config.mk | 16 -- boards.cfg | 1 + drivers/power/pmic/pmic_max77686.c | 192 ++++++++++++++++++++++ include/configs/arndale.h | 255 ++++++++++++++++++++++++++++++ include/configs/exynos5250-dt.h | 2 +- include/configs/s5p_goni.h | 3 + include/configs/smdkc100.h | 3 + include/power/max77686_pmic.h | 26 +++ tools/Makefile | 4 +-Quoted 8 lines
17 files changed, 725 insertions(+), 42 deletions(-) create mode 100644 board/samsung/arndale/Makefile create mode 100644 board/samsung/arndale/arndale.c create mode 100644 board/samsung/arndale/arndale_spl.c create mode 100644 board/samsung/dts/exynos5250-arndale.dts delete mode 100644 board/samsung/goni/config.mk delete mode 100644 board/samsung/smdkc100/config.mk create mode 100644 include/configs/arndale.hFails for arndale:
Quoted 8 lines
Quoted 4 lines
Error: /home/albert/src/u-boot-arm/board/samsung/dts/exynos5250-arndale.dts:11.2-9 syntax error
My dtc -v: "Version: DTC 1.4.0", built from source.
Its working for me.
But my dtc -v: "Version: DTC 1.3.0"
Tested now with dtc -v: "Version: DTC 1.4.0"
It got compiled. properly. Or I missed something.
Quoted 15 lines
Quoted 9 lines
Amicalement,
--
Albert.
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot--
with warm regards,
Chander Kashyap
Signature · 2 lines
with warm regards, Chander Kashyap
Hi Chander,
Quoted 4 lines
Quoted 4 lines
Its working for me.
But my dtc -v: "Version: DTC 1.3.0"
Have you managed to properly build test Samsung's u-boot tree with DTC 1.3.0?
On my setup (debian - 1.3.0-4) it fails.
Quoted 4 lines
Tested now with dtc -v: "Version: DTC 1.4.0"
It got compiled. properly. Or I missed something.
The Exynos5x boards with DT support shall be compiled with DTC version 1.4+. Otherwise they fail:
Configuring for snow board...
make: *** [checkdtc] Error 1
make: *** [checkdtc] Error 1
make: *** Waiting for unfinished jobs....
Configuring for smdk5250 board...
make: *** [checkdtc] Error 1
make: *** [checkdtc] Error 1
make: *** Waiting for unfinished jobs....
Signature · 5 lines
Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
Hi Lukasz,
Quoted 9 lines · Lukasz Majewski
Hi Chander,
Quoted 4 lines
Quoted 4 lines
Its working for me.
But my dtc -v: "Version: DTC 1.3.0"Have you managed to properly build test Samsung's u-boot tree with DTC 1.3.0?
Yes, I am able to build and test.
I am running on ubuntu.
Quoted 27 lines
On my setup (debian - 1.3.0-4) it fails.
Quoted 4 lines
Tested now with dtc -v: "Version: DTC 1.4.0"
It got compiled. properly. Or I missed something.
The Exynos5x boards with DT support shall be compiled with DTC version 1.4+. Otherwise they fail:
Configuring for snow board...
make: *** [checkdtc] Error 1
make: *** [checkdtc] Error 1
make: *** Waiting for unfinished jobs....
Configuring for smdk5250 board...
make: *** [checkdtc] Error 1
make: *** [checkdtc] Error 1
make: *** Waiting for unfinished jobs....--
Best regards,Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
Signature · 2 lines
with warm regards, Chander Kashyap
Hi Chander,
Quoted 10 lines · Chander Kashyap
Hi Lukasz,
Quoted 7 lines · Lukasz Majewski
Hi Chander,
Quoted 4 lines
Quoted 4 lines
Its working for me.
But my dtc -v: "Version: DTC 1.3.0"
Quoted 5 lines
Quoted 2 lines
Have you managed to properly build test Samsung's u-boot tree with DTC 1.3.0?
Yes, I am able to build and test.
I am running on ubuntu.
Then you are not testing on a recent enough U-Boot source tree; currently, master (and arm) require dtc version >= 1.4.0, and will fail as indicated by Lukasz and as experienced by me -- I had to build dtc version 1.4.0 from git source.
Amicalement,
Signature · 1 line
Albert.
Hi Albert,
Quoted 18 lines · Albert ARIBAUD
Hi Chander,
Quoted 13 lines · Chander Kashyap
Hi Lukasz,
Quoted 9 lines · Lukasz Majewski
Hi Chander,
Quoted 4 lines
Quoted 4 lines
Its working for me.
But my dtc -v: "Version: DTC 1.3.0"Have you managed to properly build test Samsung's u-boot tree with DTC 1.3.0?
Quoted 7 lines
Quoted 2 lines
Yes, I am able to build and test.
I am running on ubuntu.Then you are not testing on a recent enough U-Boot source tree; currently, master (and arm) require dtc version >= 1.4.0, and will fail as indicated by Lukasz and as experienced by me -- I had to build dtc version 1.4.0 from git source.
Sorry for big mess. I had re-based my tree to u-boot samsung. I have tested it after re-basing to u-boot tree.
It was failing.
Shall i send all the patches again, or is it possible to send the single failing patch.
Quoted 4 lines
Amicalement,
--
Albert.
Signature · 2 lines
with warm regards, Chander Kashyap
Hi Chander,
Quoted 29 lines · Chander Kashyap
Hi Albert,
Quoted 18 lines · Albert ARIBAUD
Hi Chander,
Quoted 13 lines · Chander Kashyap
Hi Lukasz,
Quoted 9 lines · Lukasz Majewski
Hi Chander,
Quoted 4 lines
Quoted 4 lines
Its working for me.
But my dtc -v: "Version: DTC 1.3.0"Have you managed to properly build test Samsung's u-boot tree with DTC 1.3.0?
Quoted 7 lines
Quoted 2 lines
Yes, I am able to build and test.
I am running on ubuntu.Then you are not testing on a recent enough U-Boot source tree; currently, master (and arm) require dtc version >= 1.4.0, and will fail as indicated by Lukasz and as experienced by me -- I had to build dtc version 1.4.0 from git source.
Quoted 6 lines
Sorry for big mess. I had re-based my tree to u-boot samsung. I have tested it after re-basing to u-boot tree.
It was failing.Shall i send all the patches again, or is it possible to send the single failing patch.
Well, if you have rebased to u-boot-master, then you can as well do an interactive rebase so that the commit which breaks builds is omitted.
Amicalement,
Signature · 1 line
Albert.
Hi Albert,
Quoted 38 lines · Albert ARIBAUD
Hi Chander,
Quoted 33 lines · Chander Kashyap
Hi Albert,
Quoted 18 lines · Albert ARIBAUD
Hi Chander,
Quoted 13 lines · Chander Kashyap
Hi Lukasz,
Quoted 9 lines · Lukasz Majewski
Hi Chander,
Quoted 4 lines
Quoted 4 lines
Its working for me.
But my dtc -v: "Version: DTC 1.3.0"Have you managed to properly build test Samsung's u-boot tree with DTC 1.3.0?
Quoted 7 lines
Quoted 2 lines
Yes, I am able to build and test.
I am running on ubuntu.Then you are not testing on a recent enough U-Boot source tree; currently, master (and arm) require dtc version >= 1.4.0, and will fail as indicated by Lukasz and as experienced by me -- I had to build dtc version 1.4.0 from git source.
Sorry for big mess. I had re-based my tree to u-boot samsung. I have tested it after re-basing to u-boot tree.
It was failing.
Quoted 6 lines
Quoted 2 lines
Shall i send all the patches again, or is it possible to send the single failing patch.
Well, if you have rebased to u-boot-master, then you can as well do an interactive rebase so that the commit which breaks builds is omitted.
Offending patch was part of two patch series. I have fixed it and resend it with series again.
Quoted 3 lines
Amicalement,
--
Albert.
Signature · 2 lines
with warm regards, Chander Kashyap
Dear Chander Kashyap,
Quoted 44 lines · Chander Kashyap
Hi Albert,
Quoted 41 lines · Albert ARIBAUD
Hi Chander,
Quoted 35 lines · Chander Kashyap
Hi Albert,
Quoted 18 lines · Albert ARIBAUD
Hi Chander,
Quoted 13 lines · Chander Kashyap
Hi Lukasz,
Quoted 9 lines · Lukasz Majewski
Hi Chander,
Quoted 4 lines
Quoted 4 lines
Its working for me.
But my dtc -v: "Version: DTC 1.3.0"Have you managed to properly build test Samsung's u-boot tree with DTC 1.3.0?
Quoted 7 lines
Quoted 2 lines
Yes, I am able to build and test.
I am running on ubuntu.Then you are not testing on a recent enough U-Boot source tree; currently, master (and arm) require dtc version >= 1.4.0, and will fail as indicated by Lukasz and as experienced by me -- I had to build dtc version 1.4.0 from git source.
Sorry for big mess. I had re-based my tree to u-boot samsung. I have tested it after re-basing to u-boot tree.
It was failing.Shall i send all the patches again, or is it possible to send the single failing patch.
Quoted 7 lines
Quoted 3 lines
Well, if you have rebased to u-boot-master, then you can as well do an interactive rebase so that the commit which breaks builds is omitted.
Offending patch was part of two patch series. I have fixed it and resend it with series again.
Since the patchset is already applied to u-boot-samsung, If you send new patchset, then I should do rebase and forced push. If possible please send fixing patch instead of new patchset.
Thanks,
Minkyu Kang.
Hi Minkyu,
Quoted 51 lines · Minkyu Kang
Dear Chander Kashyap,
Quoted 48 lines · Chander Kashyap
Hi Albert,
Quoted 44 lines · Albert ARIBAUD
Hi Chander,
Quoted 29 lines · Chander Kashyap
Hi Albert,
Quoted 18 lines · Albert ARIBAUD
Hi Chander,
Quoted 13 lines · Chander Kashyap
Hi Lukasz,
Quoted 9 lines · Lukasz Majewski
Hi Chander,
Quoted 4 lines
Quoted 4 lines
Its working for me.
But my dtc -v: "Version: DTC 1.3.0"Have you managed to properly build test Samsung's u-boot tree with DTC 1.3.0?
Quoted 7 lines
Quoted 2 lines
Yes, I am able to build and test.
I am running on ubuntu.Then you are not testing on a recent enough U-Boot source tree; currently, master (and arm) require dtc version >= 1.4.0, and will fail as indicated by Lukasz and as experienced by me -- I had to build dtc version 1.4.0 from git source.
Quoted 6 lines
Sorry for big mess. I had re-based my tree to u-boot samsung. I have tested it after re-basing to u-boot tree.
It was failing.Shall i send all the patches again, or is it possible to send the single failing patch.
Well, if you have rebased to u-boot-master, then you can as well do an interactive rebase so that the commit which breaks builds is omitted.
Quoted 7 lines
Quoted 3 lines
Offending patch was part of two patch series. I have fixed it and resend it with series again.
Since the patchset is already applied to u-boot-samsung, If you send new patchset, then I should do rebase and forced push. If possible please send fixing patch instead of new patchset.
Sure I will do that.
Thanks,
Quoted 3 lines
Thanks,
Minkyu Kang.
Signature · 2 lines
with warm regards, Chander Kashyap