"make install" error

DISCUSSION Arun M Kumar 3 participants 3 messages Aug 30, 2013 – Sep 5, 2013

lore

Share & tools

lore

Arun M Kumar

author

2013-08-30 05:17 UTC #0 lore raw

I am building Kernel 3.9.10

and i have given the following Commands during the Process

1. make mrproper

2. make defconfig

3. make oldconfig

4. make -j 8

5. make modules_install

6. make install

on the last step, i face the following error

-------------------------------------------------------------------------------

sh /home/temp/Linux_Build/linux-3.9.10/arch/x86/boot/install.sh 3.9.10 arch/x86/boot/bzImage \
System.map "/boot"

Kernel image:   /boot/vmlinuz-3.9.10
Initrd image:   /boot/initrd-3.9.10

Root device:
/dev/disk/by-id/ata-HGST_HTS725050A7E630_TF655AY9JP1H5C-part2 (/dev/sda2) (mounted on / as ext4)
Resume device:
/dev/disk/by-id/ata-HGST_HTS725050A7E630_TF655AY9JP1H5C-part1 (/dev/sda1)
find: `/lib/modules/3.9.10/kernel/drivers/scsi': No such file or directory
modprobe: Module xhci_hcd not found.
WARNING: no dependencies for kernel module 'xhci-hcd' found.
modprobe: Module hid_logitech_dj not found.
WARNING: no dependencies for kernel module 'hid-logitech-dj' found.
Features: acpi plymouth block usb resume.userspace resume.kernel

--------------------------------------------------------------------------------------

what could have gone wrong during the process ?

Alexandru Juncu

2013-08-30 06:53 UTC #1 lore raw

Quoted 40 lines · Arun M Kumar

I am building Kernel 3.9.10
and i have given the following Commands during the Process
1. make mrproper
2. make defconfig
3. make oldconfig
4. make -j 8
5. make modules_install
6. make install
on the last step, i face the following error
-------------------------------------------------------------------------------
sh /home/temp/Linux_Build/linux-3.9.10/arch/x86/boot/install.sh 3.9.10 arch/x86/boot/bzImage \
System.map "/boot"
Kernel image:   /boot/vmlinuz-3.9.10
Initrd image:   /boot/initrd-3.9.10
Root device:
/dev/disk/by-id/ata-HGST_HTS725050A7E630_TF655AY9JP1H5C-part2 (/dev/sda2) (mounted on / as ext4)
Resume device:
/dev/disk/by-id/ata-HGST_HTS725050A7E630_TF655AY9JP1H5C-part1 (/dev/sda1)
find: `/lib/modules/3.9.10/kernel/drivers/scsi': No such file or directory
modprobe: Module xhci_hcd not found.
WARNING: no dependencies for kernel module 'xhci-hcd' found.
modprobe: Module hid_logitech_dj not found.
WARNING: no dependencies for kernel module 'hid-logitech-dj' found.
Features: acpi plymouth block usb resume.userspace resume.kernel

Quoted 3 lines

--------------------------------------------------------------------------------------
what could have gone wrong during the process ?

It seems that the current current has a module for your hard drive. But in the new kernel, you didn't have it compile. Go in make menuconfig and select to compile it.

Srinivas Ganji

2013-09-05 11:35 UTC #2 lore raw

In reply to Arun M Kumar

Arun,

I guess, you need to select the xhci_hcd module in make menuconfig for building it as a module. Here are the steps to do it.

Device Drivers --->
[*] USB support --->

Make sure "Support for Host-side USB" is a dynamically loadable module by moving the cursor to that item and hitting the 'm' key.

Choose to compile the xHCI (USB 3.0) host controller driver as a module by hitting "m".

Turn off (hit "n") on the "USB selective suspend/resume and wakeup" option, since that isn't supported by the driver yet.

Turn on debugging for the USB subsystem by hitting "y" on "USB verbose debug messages" and "USB announce new devices".

Also turn on the "Debugging for the xHCI host controller" option.

Finally EXIT from all the sub sections and SAVE the CONFIG file.

I hope, this helps you.

Regards,
Srinivas G

Quoted 44 lines · Arun M Kumar

I am building Kernel 3.9.10
and i have given the following Commands during the Process
1. make mrproper
2. make defconfig
3. make oldconfig
4. make -j 8
5. make modules_install
6. make install
on the last step, i face the following error
-------------------------------------------------------------------------------
sh /home/temp/Linux_Build/linux-3.9.10/arch/x86/boot/install.sh 3.9.10 arch/x86/boot/bzImage \
System.map "/boot"
Kernel image:   /boot/vmlinuz-3.9.10
Initrd image:   /boot/initrd-3.9.10
Root device:
/dev/disk/by-id/ata-HGST_HTS725050A7E630_TF655AY9JP1H5C-part2 (/dev/sda2) (mounted on / as ext4)
Resume device:
/dev/disk/by-id/ata-HGST_HTS725050A7E630_TF655AY9JP1H5C-part1 (/dev/sda1)
find: `/lib/modules/3.9.10/kernel/drivers/scsi': No such file or directory
modprobe: Module xhci_hcd not found.
WARNING: no dependencies for kernel module 'xhci-hcd' found.
modprobe: Module hid_logitech_dj not found.
WARNING: no dependencies for kernel module 'hid-logitech-dj' found.
Features: acpi plymouth block usb resume.userspace resume.kernel
--------------------------------------------------------------------------------------

Quoted 8 lines

what could have gone wrong during the process ?
_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20130905/210e50de/attachment-0001.html