ARM: OMAP: Device Tree for 3.12 take #2
Hi Kevin & Olof,
Here is the updated version without the conflicting patch (ARM: dts: AM33XX: don't redefine OCP bus and device nodes) and with the signed tag. There is still a small conflict with usb-next, but it is easily fixable, and already fixed by Stephen.
Thanks,
Benoit
The following changes since commit b36f4be3de1b123d8601de062e7dbfc904f305fb:
Linux 3.11-rc6 (2013-08-18 14:36:53 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git tags/for_3.12/dts_signed
for you to fetch changes up to 4843be165c10f9886c87eeb20acf19a3ddec6653:
ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies (2013-08-30 21:33:13 +0200)
----------------------------------------------------------------
Add the minimal DTS support for DRA7xx based SoC core. Add the initial support for N900 and gta04 phones. Enable USB3 on OMAP5 evm board.
Do a lot of various cleanups.
----------------------------------------------------------------
Afzal Mohammed (2):
ARM: dts: AM4372: cpu(s) node per latest binding
ARM: dts: AM4372: add few nodes
Alexandre Belloni (1):
ARM: dts: AM33XX: Add PMU support
Benoit Cousson (1):
ARM: OMAP5: hwmod: add missing ocp2scp hwmod data
Felipe Balbi (4):
ARM: OMAP5: dts: fix reg property size
ARM: OMAP5: dts: fix ocp2scp DTS data
ARM: OMAP5: dts: add palmas-usb node
ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies
Javier Martinez Canillas (4):
ARM: dts: omap3-igep: add pinmux node for GPIO LED configuration
ARM: dts: omap3-igep0020: add mux conf for GPIO LEDs
ARM: dts: omap3-igep0030: add mux conf for GPIO LED
ARM: dts: AM33XX: use pinmux node defined in included file
Kishon Vijay Abraham I (1):
ARM: dts: omap5-uevm: Split SMPS10 in two nodes
Lars Poeschel (1):
ARM: dts: AM33xx: Correct gpio #interrupt-cells property
Lee Jones (7):
ARM: dts: Remove '0x's from OMAP2420 H4 DTS file
ARM: dts: Remove '0x's from OMAP3 IGEP0020 DTS file
ARM: dts: Remove '0x's from OMAP3 IGEP0030 DTS file
ARM: dts: Remove '0x's from OMAP3 DTS file
ARM: dts: Remove '0x's from OMAP3430 SDP DTS file
ARM: dts: Remove '0x's from OMAP4 DTS file
ARM: dts: Remove '0x's from OMAP5 DTS fileMarek Belisko (1):
ARM: dts: Add devicetree for gta04 board.
Pavel Machek (1):
ARM: dts: N900: Add device tree
R Sricharan (1):
ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board
Robert Nelson (1):
ARM: dts: omap3-beagle-xm: fix string error in compatible property
Roger Quadros (1):
ARM: dts: omap3-beagle: Make USB host pin naming consistent
Ruslan Bilovol (1):
ARM: dts: twl6030: Move common configuration for OMAP4 boards in a separate dtsi file
arch/arm/boot/dts/Makefile | 5 +- arch/arm/boot/dts/am335x-bone.dts | 176 ++++----- arch/arm/boot/dts/am335x-evm.dts | 254 ++++++------- arch/arm/boot/dts/am335x-evmsk.dts | 258 ++++++------- arch/arm/boot/dts/am33xx.dtsi | 13 +- arch/arm/boot/dts/am4372.dtsi | 347 +++++++++++++++++ arch/arm/boot/dts/dra7-evm.dts | 140 +++++++ arch/arm/boot/dts/dra7.dtsi | 575 +++++++++++++++++++++++++++++ arch/arm/boot/dts/omap2420-h4.dts | 6 +- arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +- arch/arm/boot/dts/omap3-beagle.dts | 24 +- arch/arm/boot/dts/omap3-gta04.dts | 168 +++++++++ arch/arm/boot/dts/omap3-igep.dtsi | 2 + arch/arm/boot/dts/omap3-igep0020.dts | 19 +- arch/arm/boot/dts/omap3-igep0030.dts | 17 +- arch/arm/boot/dts/omap3-n900.dts | 92 +++++ arch/arm/boot/dts/omap3.dtsi | 2 +- arch/arm/boot/dts/omap3430-sdp.dts | 22 +- arch/arm/boot/dts/omap4-panda-common.dtsi | 21 +- arch/arm/boot/dts/omap4-sdp.dts | 21 +- arch/arm/boot/dts/omap4.dtsi | 2 +- arch/arm/boot/dts/omap5-uevm.dts | 25 +- arch/arm/boot/dts/omap5.dtsi | 13 +- arch/arm/boot/dts/twl6030_omap4.dtsi | 38 ++ arch/arm/configs/omap2plus_defconfig | 9 + arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 45 +++ include/dt-bindings/pinctrl/dra.h | 50 +++ 27 files changed, 1912 insertions(+), 434 deletions(-) create mode 100644 arch/arm/boot/dts/dra7-evm.dts create mode 100644 arch/arm/boot/dts/dra7.dtsi create mode 100644 arch/arm/boot/dts/omap3-gta04.dts create mode 100644 arch/arm/boot/dts/omap3-n900.dts create mode 100644 arch/arm/boot/dts/twl6030_omap4.dtsi create mode 100644 include/dt-bindings/pinctrl/dra.h
Benoit,
Quoted 4 lines · Benoit Cousson
Hi Kevin & Olof,
Here is the updated version without the conflicting patch (ARM: dts: AM33XX: don't redefine OCP bus and device nodes) and with the signed tag. There is still a small conflict with usb-next, but it is easily fixable, and already fixed by Stephen.
Sorry, I wasn't able to get this pulled in before the merge window opened, so it'll unfortunately have to wait until 3.13. Please send a fresh pull request as soon as -rc1 is out.
It looks like a few of these are fixes (at least from the patch topics), we'd of course be happy to take those.
-Olof
Hi Olof,
Quoted 11 lines · Olof Johansson
Benoit,
Quoted 4 lines · Benoit Cousson
Hi Kevin & Olof,
Here is the updated version without the conflicting patch (ARM: dts: AM33XX: don't redefine OCP bus and device nodes) and with the signed tag. There is still a small conflict with usb-next, but it is easily fixable, and already fixed by Stephen.
Sorry, I wasn't able to get this pulled in before the merge window opened, so it'll unfortunately have to wait until 3.13. Please send a fresh pull request as soon as -rc1 is out.
Gosh :-(
That was just the update of the previous conflicting one. Did you remove the older version as well?
Quoted 2 lines
It looks like a few of these are fixes (at least from the patch topics), we'd of course be happy to take those.
OK, I'll extract the fixes for 3.12-rc.
Regards,
Benoit