Unexpected behavior from PR server
I'm apparently a little shaky on exactly how the PR service is supposed to work. I noticed an anomaly that adding a patch to SRC_URI for u-boot did not result in a new package revision as I expected. I'm using PRSERV_HOST="localhost:0" and have bulidhistory enabled.
I just tried this with a toy recipe named "hello" with a constant PR=r1 which does nothing but install a file from SRC_URI into ${datadir} with this:
PR = "r1"
SRC_URI = " \
file://file1 \"
S = "${WORKDIR}"
do_install () {
install -d ${D}/${datadir}/files
install file* ${D}/${datadir}/files
}
FILES_${PN} = "${datadir}/files/*"
I started with one file in SRC_URI, and "bitbake hello" produced hello-1.0-r1.0.armv7a_vfp_neon.rpm as I expected.
I then added a second file to SRC_URI and re-ran "bitbake hello". The recipe stages were re-executed, the new file was fetched and installed, and I now have a hello-1.0-r1.0.armv7a_vfp_neon.rpm (same name) with different contents. Build history confirms the differences in the package FILELIST but no change to PKGR, as does dumping the rpm contents.
It is true that changing SRC_URI had no effect on the run.* task script contents for the package, so it makes sense that the PR server doesn't detect that the package is different from the last time it was built if signatures from those scripts are the only way recipe changes are detected. But it very much surprises me that changing the sources does not result in a PR bump. In the normal work flow, adding a new patch to SRC_URI is certainly something that I would expect to produce a new package revision.
Is this how it's supposed to work?
Peter
Quoted 42 lines · Peter A. Bigot
I'm apparently a little shaky on exactly how the PR service is supposed to work. I noticed an anomaly that adding a patch to
SRC_URIfor u-boot did not result in a new package revision as I expected. I'm using PRSERV_HOST="localhost:0" and have bulidhistory enabled.I just tried this with a toy recipe named "hello" with a constant PR=r1 which does nothing but install a file from
SRC_URIinto ${datadir} with this:PR = "r1"
SRC_URI = " \ file://file1 \"
S = "${WORKDIR}"
do_install () { install -d ${D}/${datadir}/files install file* ${D}/${datadir}/files }FILES_${PN} = "${datadir}/files/*"
I started with one file in
SRC_URI, and "bitbake hello" produced hello-1.0-r1.0.armv7a_vfp_neon.rpm as I expected.I then added a second file to
SRC_URIand re-ran "bitbake hello". The recipe stages were re-executed, the new file was fetched and installed, and I now have a hello-1.0-r1.0.armv7a_vfp_neon.rpm (same name) with different contents. Build history confirms the differences in the package FILELIST but no change to PKGR, as does dumping the rpm contents.It is true that changing
SRC_URIhad no effect on the run.* task script contents for the package, so it makes sense that the PR server doesn't detect that the package is different from the last time it was built if signatures from those scripts are the only way recipe changes are detected. But it very much surprises me that changing the sources does not result in a PR bump. In the normal work flow, adding a new patch toSRC_URIis certainly something that I would expect to produce a new package revision.
Quoted 1 line
Is this how it's supposed to work?
It appears that something is broken :/
I'll see if I can figure out exactly what but it seems to be something in the PR server itself.
Cheers,
Richard
Quoted 5 lines
Peter
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core
Quoted 43 lines · Richard Purdie
Quoted 42 lines · Peter A. Bigot
I'm apparently a little shaky on exactly how the PR service is supposed to work. I noticed an anomaly that adding a patch to
SRC_URIfor u-boot did not result in a new package revision as I expected. I'm using PRSERV_HOST="localhost:0" and have bulidhistory enabled.I just tried this with a toy recipe named "hello" with a constant PR=r1 which does nothing but install a file from
SRC_URIinto ${datadir} with this:PR = "r1"
SRC_URI = " \ file://file1 \"
S = "${WORKDIR}"
do_install () { install -d ${D}/${datadir}/files install file* ${D}/${datadir}/files }FILES_${PN} = "${datadir}/files/*"
I started with one file in
SRC_URI, and "bitbake hello" produced hello-1.0-r1.0.armv7a_vfp_neon.rpm as I expected.I then added a second file to
SRC_URIand re-ran "bitbake hello". The recipe stages were re-executed, the new file was fetched and installed, and I now have a hello-1.0-r1.0.armv7a_vfp_neon.rpm (same name) with different contents. Build history confirms the differences in the package FILELIST but no change to PKGR, as does dumping the rpm contents.It is true that changing
SRC_URIhad no effect on the run.* task script contents for the package, so it makes sense that the PR server doesn't detect that the package is different from the last time it was built if signatures from those scripts are the only way recipe changes are detected. But it very much surprises me that changing the sources does not result in a PR bump. In the normal work flow, adding a new patch toSRC_URIis certainly something that I would expect to produce a new package revision.
Quoted 6 lines
Quoted 1 line
Is this how it's supposed to work?
It appears that something is broken :/
I'll see if I can figure out exactly what but it seems to be something in the PR server itself.
Found the problem, the PR server wasn't persisting data after some recent changes. I've fixed it. Thanks for reporting that.
Cheers,
Richard