enclosure: remove all possible sysfs entries before add device
Subsystems (2)
PATCH 1/1 enclosure: remove all possible sysfs entries before add device
When do disk pull/insert test we encountered below:
WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0xbc/0xe0() Hardware name: SUN FIRE X4370 M2 SERVER sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/0000:0d:00.0/host6/port-6:1/expander-6:1/port-6:1:14/end_device-6:1:14/target6:0:27/6:0:27:0/enclosure_device:HDD10' Modules linked in: oracleacfs(P)(U) oracleadvm(P)(U) oracleoks(P)(U) mptctl mptbase autofs4 hidp bluetooth rfkill lockd sunrpc bonding be2iscsi iscsi_boot_sysfs ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp bnx2i cnic uio ipv6 cxgb3i libcxgbi cxgb3 mdio libiscsi_tcp libiscsi scsi_transport_iscsi dm_round_robin dm_multipath video sbs sbshc acpi_pad acpi_memhotplug acpi_ipmi parport_pc lp parport ipmi_si ipmi_devintf ipmi_msghandler sg ses enclosure ixgbe e1000e hwmon igb snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc iTCO_wdt pcspkr i2c_i801 ioatdma ghes iTCO_vendor_support hed dca i2c_core i7core_edac edac_core dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_mod usb_sto rage shpchp mpt2sas scsi_transport_sas raid_class ahci libahci sd_mod crc_t10dif raid1 ext3 jbd mbcache Pid: 23302, comm: kworker/u:2 Tainted: P 2.6.39-400.124.1.el5uek #1 Call Trace: [<ffffffff811daf8c>] ? sysfs_add_one+0xbc/0xe0 [<ffffffff8106f030>] warn_slowpath_common+0x90/0xc0 [<ffffffff8106f15e>] warn_slowpath_fmt+0x6e/0x70 [<ffffffff81258bd4>] ? strlcat+0x54/0x70 [<ffffffff811daf8c>] sysfs_add_one+0xbc/0xe0 [<ffffffff811dbec8>] sysfs_do_create_link+0x148/0x1d0 [<ffffffff811dbf83>] sysfs_create_link+0x13/0x20 [<ffffffffa00de307>] enclosure_add_links+0xe7/0x110 [enclosure] [<ffffffff8125325d>] ? kobject_release+0xd/0x10 [<ffffffff812549e7>] ? kref_put+0x37/0x70 [<ffffffffa00de3c3>] enclosure_add_device+0x93/0xa0 [enclosure] [<ffffffffa00c8666>] ses_enclosure_find_by_addr+0x76/0xc0 [ses] [<ffffffffa00c85f0>] ? ses_get_fault+0x40/0x40 [ses] [<ffffffffa00de433>] enclosure_for_each_device+0x63/0x90 [enclosure] [<ffffffffa00c8a8a>] ses_match_to_enclosure+0x11a/0x1d0 [ses] [<ffffffffa00c8e08>] ses_intf_add+0x2c8/0x5c0 [ses] [<ffffffff8125327a>] ? kobject_get+0x1a/0x30 [<ffffffff814e8b56>] ? add_tail+0x36/0x50 [<ffffffff81345ae4>] device_add+0x2d4/0x380 [<ffffffff8136b096>] scsi_sysfs_add_sdev+0xe6/0x2a0 [<ffffffff813682cc>] scsi_add_lun+0x41c/0x560 [<ffffffff81368a80>] scsi_probe_and_add_lun+0x1e0/0x3e0 [<ffffffff81041009>] ? default_spin_lock_flags+0x9/0x10 [<ffffffff813696e7>] __scsi_scan_target+0xe7/0x120 [<ffffffff81369b8d>] scsi_scan_target+0xcd/0xf0 [<ffffffffa003faab>] sas_rphy_add+0x11b/0x170 [scsi_transport_sas] [<ffffffffa009a74f>] mpt2sas_transport_port_add+0x2cf/0x430 [mpt2sas] [<ffffffffa008d437>] _scsih_sas_device_add+0x87/0x110 [mpt2sas] [<ffffffffa0094eb8>] _scsih_add_device+0x248/0x340 [mpt2sas] [<ffffffffa0098cb1>] ? mpt2sas_transport_update_links+0xf1/0x190 [mpt2sas] [<ffffffffa00977b6>] _scsih_sas_topology_change_event+0x3c6/0x490 [mpt2sas] [<ffffffff81080698>] ? add_timer+0x18/0x20 [<ffffffff8108a405>] ? queue_delayed_work_on+0xc5/0x170 [<ffffffffa0097a85>] _mpt2sas_fw_work+0x205/0x240 [mpt2sas] [<ffffffffa0097ad9>] _firmware_event_work_delayed+0x19/0x20 [mpt2sas] [<ffffffff8108c0d9>] process_one_work+0xf9/0x370 [<ffffffffa0097ac0>] ? _mpt2sas_fw_work+0x240/0x240 [mpt2sas] [<ffffffff8108ca1a>] worker_thread+0xca/0x240 [<ffffffff8108c950>] ? manage_workers+0x90/0x90 [<ffffffff81090ff7>] kthread+0x97/0xa0 [<ffffffff8150fdc4>] kernel_thread_helper+0x4/0x10 [<ffffffff81090f60>] ? kthread_bind+0x80/0x80 [<ffffffff8150fdc0>] ? gs_change+0x13/0x13 ---[ end trace 89a1351702ab360f ]---
During our test, multipath used, each LUN has 2 paths. when adding second path enclousure did not check if will adding device's symlink existed or no.
--- drivers/misc/enclosure.c | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/misc/enclosure.c +7 -0
@@ -325,6 +325,13 @@ int enclosure_add_device(struct enclosure_device *edev, int component,if (cdev->dev)enclosure_remove_links (cdev); +if (dev) { +char name[ENCLOSURE_NAME_SIZE ]; + +enclosure_link_name (cdev, name); +sysfs_remove_link (&dev->kobj, name); + } +put_device (cdev->dev); cdev->dev =get_device (dev);return enclosure_add_links (cdev);
Signature · 1 line
1.8.3.1
Quoted 1 line
Modules linked in: oracleacfs(P)(U) oracleadvm(P)(U) oracleoks(P)(U)
Please reproduce without this weird crap loaded.
Quoted 6 lines · Joe Jin
When do disk pull/insert test we encountered below:
WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0xbc/0xe0() Hardware name: SUN FIRE X4370 M2 SERVER sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/0000:0d:00.0/host6/port-6:1/expander-6:1/port-6:1:14/end_device-6:1:14/target6:0:27/6:0:27:0/enclosure_device:HDD10' Modules linked in: oracleacfs(P)(U) oracleadvm(P)(U) oracleoks(P)(U) mptctl mptbase autofs4 hidp bluetooth rfkill lockd sunrpc bonding be2iscsi iscsi_boot_sysfs ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp bnx2i cnic uio ipv6 cxgb3i libcxgbi cxgb3 mdio libiscsi_tcp libiscsi scsi_transport_iscsi dm_round_robin dm_multipath video sbs sbshc acpi_pad acpi_memhotplug acpi_ipmi parport_pc lp parport ipmi_si ipmi_devintf ipmi_msghandler sg ses enclosure ixgbe e1000e hwmon igb snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc iTCO_wdt pcspkr i2c_i801 ioatdma ghes iTCO_vendor_support hed dca i2c_core i7core_edac edac_core dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_mod usb_s
torage shpchp mpt2sas scsi_transport_sas raid_class ahci libahci sd_mod crc_t10dif raid1 ext3 jbd mbcache
Quoted 65 lines
Pid: 23302, comm: kworker/u:2 Tainted: P 2.6.39-400.124.1.el5uek #1
Call Trace: [<ffffffff811daf8c>] ? sysfs_add_one+0xbc/0xe0 [<ffffffff8106f030>] warn_slowpath_common+0x90/0xc0 [<ffffffff8106f15e>] warn_slowpath_fmt+0x6e/0x70 [<ffffffff81258bd4>] ? strlcat+0x54/0x70 [<ffffffff811daf8c>] sysfs_add_one+0xbc/0xe0 [<ffffffff811dbec8>] sysfs_do_create_link+0x148/0x1d0 [<ffffffff811dbf83>] sysfs_create_link+0x13/0x20 [<ffffffffa00de307>] enclosure_add_links+0xe7/0x110 [enclosure] [<ffffffff8125325d>] ? kobject_release+0xd/0x10 [<ffffffff812549e7>] ? kref_put+0x37/0x70 [<ffffffffa00de3c3>] enclosure_add_device+0x93/0xa0 [enclosure] [<ffffffffa00c8666>] ses_enclosure_find_by_addr+0x76/0xc0 [ses] [<ffffffffa00c85f0>] ? ses_get_fault+0x40/0x40 [ses] [<ffffffffa00de433>] enclosure_for_each_device+0x63/0x90 [enclosure] [<ffffffffa00c8a8a>] ses_match_to_enclosure+0x11a/0x1d0 [ses] [<ffffffffa00c8e08>] ses_intf_add+0x2c8/0x5c0 [ses] [<ffffffff8125327a>] ? kobject_get+0x1a/0x30 [<ffffffff814e8b56>] ? add_tail+0x36/0x50 [<ffffffff81345ae4>] device_add+0x2d4/0x380 [<ffffffff8136b096>] scsi_sysfs_add_sdev+0xe6/0x2a0 [<ffffffff813682cc>] scsi_add_lun+0x41c/0x560 [<ffffffff81368a80>] scsi_probe_and_add_lun+0x1e0/0x3e0 [<ffffffff81041009>] ? default_spin_lock_flags+0x9/0x10 [<ffffffff813696e7>] __scsi_scan_target+0xe7/0x120 [<ffffffff81369b8d>] scsi_scan_target+0xcd/0xf0 [<ffffffffa003faab>] sas_rphy_add+0x11b/0x170 [scsi_transport_sas] [<ffffffffa009a74f>] mpt2sas_transport_port_add+0x2cf/0x430 [mpt2sas] [<ffffffffa008d437>] _scsih_sas_device_add+0x87/0x110 [mpt2sas] [<ffffffffa0094eb8>] _scsih_add_device+0x248/0x340 [mpt2sas] [<ffffffffa0098cb1>] ? mpt2sas_transport_update_links+0xf1/0x190 [mpt2sas] [<ffffffffa00977b6>] _scsih_sas_topology_change_event+0x3c6/0x490 [mpt2sas] [<ffffffff81080698>] ? add_timer+0x18/0x20 [<ffffffff8108a405>] ? queue_delayed_work_on+0xc5/0x170 [<ffffffffa0097a85>] _mpt2sas_fw_work+0x205/0x240 [mpt2sas] [<ffffffffa0097ad9>] _firmware_event_work_delayed+0x19/0x20 [mpt2sas] [<ffffffff8108c0d9>] process_one_work+0xf9/0x370 [<ffffffffa0097ac0>] ? _mpt2sas_fw_work+0x240/0x240 [mpt2sas] [<ffffffff8108ca1a>] worker_thread+0xca/0x240 [<ffffffff8108c950>] ? manage_workers+0x90/0x90 [<ffffffff81090ff7>] kthread+0x97/0xa0 [<ffffffff8150fdc4>] kernel_thread_helper+0x4/0x10 [<ffffffff81090f60>] ? kthread_bind+0x80/0x80 [<ffffffff8150fdc0>] ? gs_change+0x13/0x13 ---[ end trace 89a1351702ab360f ]---During our test, multipath used, each LUN has 2 paths. when adding second path enclousure did not check if will adding device's symlink existed or no.
Cc James Bottomley <[email protected]>Signed-off-by Joe Jin <[email protected]>--- drivers/misc/enclosure.c | 7 +++++++ 1 file changed, 7 insertions(+)drivers/misc/enclosure.c +0
-0@@ -325,6 +325,13 @@ int enclosure_add_device(struct enclosure_device *edev, int component,if (cdev->dev)enclosure_remove_links (cdev);
drivers/misc/enclosure.c int enclosure_add_device(struct enclosure_device *edev, int component, · line 337
Quoted 10 lines
drivers/misc/enclosure.c +7
-0+if (dev) { +char name[ENCLOSURE_NAME_SIZE ]; + +enclosure_link_name (cdev, name); +sysfs_remove_link (&dev->kobj, name); + } +put_device (cdev->dev); cdev->dev =get_device (dev);return enclosure_add_links (cdev);
We've been looking at a similar issue with SAS multipath using the ipr driver.
Wendy, does this patch fix the issue you are seeing as well or is this a different issue?
Thanks,
Brian
Signature · 3 lines
Brian King Power Linux I/O IBM Linux Technology Center
Quoted 4 lines · Christoph Hellwig
Quoted 1 line
Modules linked in: oracleacfs(P)(U) oracleadvm(P)(U) oracleoks(P)(U)Please reproduce without this weird crap loaded.
These modules is filesystem and will not impact enclosure.
Thanks,
Joe
James Bottomley
maintainerQuoted 6 lines · Joe Jin
When do disk pull/insert test we encountered below:
WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0xbc/0xe0() Hardware name: SUN FIRE X4370 M2 SERVER sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/0000:0d:00.0/host6/port-6:1/expander-6:1/port-6:1:14/end_device-6:1:14/target6:0:27/6:0:27:0/enclosure_device:HDD10' Modules linked in: oracleacfs(P)(U) oracleadvm(P)(U) oracleoks(P)(U) mptctl mptbase autofs4 hidp bluetooth rfkill lockd sunrpc bonding be2iscsi iscsi_boot_sysfs ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp bnx2i cnic uio ipv6 cxgb3i libcxgbi cxgb3 mdio libiscsi_tcp libiscsi scsi_transport_iscsi dm_round_robin dm_multipath video sbs sbshc acpi_pad acpi_memhotplug acpi_ipmi parport_pc lp parport ipmi_si ipmi_devintf ipmi_msghandler sg ses enclosure ixgbe e1000e hwmon igb snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc iTCO_wdt pcspkr i2c_i801 ioatdma ghes iTCO_vendor_support hed dca i2c_core i7core_edac edac_core dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_mod usb_s
torage shpchp mpt2sas scsi_transport_sas raid_class ahci libahci sd_mod crc_t10dif raid1 ext3 jbd mbcache
Quoted 47 lines
Pid: 23302, comm: kworker/u:2 Tainted: P 2.6.39-400.124.1.el5uek #1
Call Trace: [<ffffffff811daf8c>] ? sysfs_add_one+0xbc/0xe0 [<ffffffff8106f030>] warn_slowpath_common+0x90/0xc0 [<ffffffff8106f15e>] warn_slowpath_fmt+0x6e/0x70 [<ffffffff81258bd4>] ? strlcat+0x54/0x70 [<ffffffff811daf8c>] sysfs_add_one+0xbc/0xe0 [<ffffffff811dbec8>] sysfs_do_create_link+0x148/0x1d0 [<ffffffff811dbf83>] sysfs_create_link+0x13/0x20 [<ffffffffa00de307>] enclosure_add_links+0xe7/0x110 [enclosure] [<ffffffff8125325d>] ? kobject_release+0xd/0x10 [<ffffffff812549e7>] ? kref_put+0x37/0x70 [<ffffffffa00de3c3>] enclosure_add_device+0x93/0xa0 [enclosure] [<ffffffffa00c8666>] ses_enclosure_find_by_addr+0x76/0xc0 [ses] [<ffffffffa00c85f0>] ? ses_get_fault+0x40/0x40 [ses] [<ffffffffa00de433>] enclosure_for_each_device+0x63/0x90 [enclosure] [<ffffffffa00c8a8a>] ses_match_to_enclosure+0x11a/0x1d0 [ses] [<ffffffffa00c8e08>] ses_intf_add+0x2c8/0x5c0 [ses] [<ffffffff8125327a>] ? kobject_get+0x1a/0x30 [<ffffffff814e8b56>] ? add_tail+0x36/0x50 [<ffffffff81345ae4>] device_add+0x2d4/0x380 [<ffffffff8136b096>] scsi_sysfs_add_sdev+0xe6/0x2a0 [<ffffffff813682cc>] scsi_add_lun+0x41c/0x560 [<ffffffff81368a80>] scsi_probe_and_add_lun+0x1e0/0x3e0 [<ffffffff81041009>] ? default_spin_lock_flags+0x9/0x10 [<ffffffff813696e7>] __scsi_scan_target+0xe7/0x120 [<ffffffff81369b8d>] scsi_scan_target+0xcd/0xf0 [<ffffffffa003faab>] sas_rphy_add+0x11b/0x170 [scsi_transport_sas] [<ffffffffa009a74f>] mpt2sas_transport_port_add+0x2cf/0x430 [mpt2sas] [<ffffffffa008d437>] _scsih_sas_device_add+0x87/0x110 [mpt2sas] [<ffffffffa0094eb8>] _scsih_add_device+0x248/0x340 [mpt2sas] [<ffffffffa0098cb1>] ? mpt2sas_transport_update_links+0xf1/0x190 [mpt2sas] [<ffffffffa00977b6>] _scsih_sas_topology_change_event+0x3c6/0x490 [mpt2sas] [<ffffffff81080698>] ? add_timer+0x18/0x20 [<ffffffff8108a405>] ? queue_delayed_work_on+0xc5/0x170 [<ffffffffa0097a85>] _mpt2sas_fw_work+0x205/0x240 [mpt2sas] [<ffffffffa0097ad9>] _firmware_event_work_delayed+0x19/0x20 [mpt2sas] [<ffffffff8108c0d9>] process_one_work+0xf9/0x370 [<ffffffffa0097ac0>] ? _mpt2sas_fw_work+0x240/0x240 [mpt2sas] [<ffffffff8108ca1a>] worker_thread+0xca/0x240 [<ffffffff8108c950>] ? manage_workers+0x90/0x90 [<ffffffff81090ff7>] kthread+0x97/0xa0 [<ffffffff8150fdc4>] kernel_thread_helper+0x4/0x10 [<ffffffff81090f60>] ? kthread_bind+0x80/0x80 [<ffffffff8150fdc0>] ? gs_change+0x13/0x13 ---[ end trace 89a1351702ab360f ]---
Quoted 2 lines
During our test, multipath used, each LUN has 2 paths. when adding second path enclousure did not check if will adding device's symlink existed or no.
The description doesn't look helpful. The problem, presumably in a remove/re-add test that the add event gets processed before the remove event, which is why the link is still there?
Quoted 11 lines
Cc James Bottomley <[email protected]>Signed-off-by Joe Jin <[email protected]>--- drivers/misc/enclosure.c | 7 +++++++ 1 file changed, 7 insertions(+)drivers/misc/enclosure.c +0
-0
drivers/misc/enclosure.c int enclosure_add_device(struct enclosure_device *edev, int component, · line 328
Quoted 4 lines
drivers/misc/enclosure.c +1
-0@@ -325,6 +325,13 @@ int enclosure_add_device(struct enclosure_device *edev, int component,if (cdev->dev)enclosure_remove_links (cdev); +if (dev) {
This test is pointless. Adding a NULL device is illegal.
drivers/misc/enclosure.c int enclosure_add_device(struct enclosure_device *edev, int component, · line 332
Quoted 4 lines
drivers/misc/enclosure.c +4
-0+char name[ENCLOSURE_NAME_SIZE ]; + +enclosure_link_name (cdev, name); +sysfs_remove_link (&dev->kobj, name);
If we're really going to force eject the device, then this should be enclosure_remove_device(edev, dev);
How do you prevent the case for remove re-add in the same slot? Surely in that case, with your code, the link will get removed again when the remove gets processed, so the slot will then look empty (even though it's not).
James
James Bottomley
maintainerQuoted 6 lines · Joe Jin
Quoted 4 lines · Christoph Hellwig
Quoted 1 line
Modules linked in: oracleacfs(P)(U) oracleadvm(P)(U) oracleoks(P)(U)Please reproduce without this weird crap loaded.
These modules is filesystem and will not impact enclosure.
That's not really something you can guarantee, is it? Experience has shown us that binary modules tend to do silly things which can compromise the integrity of the whole system, so it's not unreasonable to ask for a reproduction without them, particularly as most kernel debugging time is volunteer best effort.
In this case the problem looks to be udev and timing related, so having it reproduced without these modules eliminates a real source of uncertainty.
James
Quoted 5 lines · James Bottomley
Quoted 2 lines
Quoted 2 lines
During our test, multipath used, each LUN has 2 paths. when adding second path enclousure did not check if will adding device's symlink existed or no.
The description doesn't look helpful. The problem, presumably in a remove/re-add test that the add event gets processed before the remove event, which is why the link is still there?
Attach my debug info to here:
sd 7:0:27:0: [ses_intf_add]:cdev:ffff8817e81fcba0,intf:ffffffffa00c9400,sdev:ffff8817e81fc800
sd 7:0:27:0: [ses_intf_add] call ses_match_to_enclosure(edev=ffff8817e812c000,sdev=ffff8817e81fc800), cdev=ffff8817e81fcba0 sd 7:0:27:0: *** inq[6]: 48
sd 7:0:27:0: [sdq] 1172123568 512-byte logical blocks: (600 GB/558 GiB)
sd 7:0:27:0: [sdq] Write Protect is off
ADD: [enclosure_add_links]: kobj: <ffff8817e812cce8> target: <ffff8817e81fc948>, device
ADD: [enclosure_add_links]: kobj: <ffff8817e81fc948> target: <ffff8817e812cce8>, name: enclosure_device:HDD10 [ses_enclosure_find_by_addr] call enclosure_add_device(edev=ffff8817e812c000,i=4,efd->dev=ffff8817e81fc938),cdev=ffff8817e812ccd0 sd 7:0:27:0: [ses_intf_add] call ses_match_to_enclosure(edev=ffff8817ebd18000,sdev=ffff8817e81fc800), cdev=ffff8817e81fcba0 sd 7:0:27:0: *** inq[6]: 48
sd 7:0:27:0: [sdq] Write cache: disabled, read cache: enabled, supports DPO and FUA [ses_enclosure_find_by_addr] call enclosure_add_device(edev=ffff8817e812c000,i=4,efd->dev=ffff8817e81fc938),cdev=ffff8817e812ccd0 sd 7:0:27:0: Attached scsi generic sg17 type 0
sdq: sdq1 sdq2
scsi 6:0:27:0: SSP: handle(0x001c), sas_addr(0x5000c500006bd15e), phy(2), device_name(0x5000c500006bd15e) scsi 6:0:27:0: SSP: enclosure_logical_id(0x5080020000a3a510), slot(10)
scsi 6:0:27:0: serial_number(000934E00P0S 3SL00P0S)
scsi 6:0:27:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1)
sd 6:0:27:0: [ses_intf_add]:cdev:ffff8817e8304ba0,intf:ffffffffa00c9400,sdev:ffff8817e8304800
sd 6:0:27:0: [ses_intf_add] call ses_match_to_enclosure(edev=ffff8817e0c5c000,sdev=ffff8817e8304800), cdev=ffff8817e8304ba0 sd 6:0:27:0: *** inq[6]: 48
sd 6:0:27:0: [sdac] 1172123568 512-byte logical blocks: (600 GB/558 GiB)
sd 7:0:27:0: [sdq] Attached SCSI disk
RM: [enclosure_remove_links]: kobj: <ffff8817e81fc948> name: [enclosure_device:HDD10]
RM: [enclosure_remove_links]: kobj: <ffff8817e812cce8> device
sd 6:0:27:0: [sdac] Write Protect is off
ADD: [enclosure_add_links]: kobj: <ffff8817e812cce8> target: <ffff8817e8304948>, device
ADD: [enclosure_add_links]: kobj: <ffff8817e8304948> target: <ffff8817e812cce8>, name: enclosure_device:HDD10 [ses_enclosure_find_by_addr] call enclosure_add_device(edev=ffff8817e812c000,i=4,efd->dev=ffff8817e8304938),cdev=ffff8817e812ccd0 sd 6:0:27:0: [ses_intf_add] call ses_match_to_enclosure(edev=ffff8817e4094000,sdev=ffff8817e8304800), cdev=ffff8817e8304ba0 sd 6:0:27:0: *** inq[6]: 48
RM: [enclosure_remove_links]: kobj: <ffff8817e9a80948> name: [enclosure_device:HDD10]
RM: [enclosure_remove_links]: kobj: <ffff8817e4094ce8> device
ADD: [enclosure_add_links]: kobj: <ffff8817e4094ce8> target: <ffff8817e8304948>, device
ADD: [enclosure_add_links]: kobj: <ffff8817e8304948> target: <ffff8817e4094ce8>, name: enclosure_device:HDD10
------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0xbc/0xe0() Hardware name: SUN FIRE X4370 M2 SERVER sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/0000:0d:00.0/host6/port-6:1/expander-6:1/port-6:1:14/end_device-6:1:14/target6:0:27/6:0:27:0/enclosure_device:HDD10' Modules linked in: oracleacfs(P)(U) oracleadvm(P)(U) oracleoks(P)(U) mptctl mptbase autofs4 hidp bluetooth rfkill lockd sunrpc bonding be2iscsi iscsi_boot_sysfs ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp bnx2i cnic uio ipv6 cxgb3i libcxgbi cxgb3 mdio libiscsi_tcp libiscsi scsi_transport_iscsi dm_round_robin dm_multipath video sbs sbshc acpi_pad acpi_memhotplug acpi_ipmi parport_pc lp parport ipmi_si ipmi_devintf ipmi_msghandler sg ses enclosure ixgbe e1000e hwmon igb snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc iTCO_wdt pcspkr i2c_i801 ioatdma ghes iTCO_vendor_support hed dca i2c_core i7core_edac edac_core dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_mod usb_sto rage shpchp mpt2sas scsi_transport_sas raid_class ahci libahci sd_mod crc_t10dif raid1 ext3 jbd mbcache Pid: 23302, comm: kworker/u:2 Tainted: P 2.6.39-400.124.1.el5uek.bug17342873V2 #1 Call Trace: [<ffffffff811daf8c>] ? sysfs_add_one+0xbc/0xe0 [<ffffffff8106f030>] warn_slowpath_common+0x90/0xc0 [<ffffffff8106f15e>] warn_slowpath_fmt+0x6e/0x70 [<ffffffff81258bd4>] ? strlcat+0x54/0x70 [<ffffffff811daf8c>] sysfs_add_one+0xbc/0xe0 [<ffffffff811dbec8>] sysfs_do_create_link+0x148/0x1d0 [<ffffffff811dbf83>] sysfs_create_link+0x13/0x20 [<ffffffffa00de307>] enclosure_add_links+0xe7/0x110 [enclosure] [<ffffffff8125325d>] ? kobject_release+0xd/0x10 [<ffffffff812549e7>] ? kref_put+0x37/0x70 [<ffffffffa00de3c3>] enclosure_add_device+0x93/0xa0 [enclosure] [<ffffffffa00c8666>] ses_enclosure_find_by_addr+0x76/0xc0 [ses] [<ffffffffa00c85f0>] ? ses_get_fault+0x40/0x40 [ses] [<ffffffffa00de433>] enclosure_for_each_device+0x63/0x90 [enclosure] [<ffffffffa00c8a8a>] ses_match_to_enclosure+0x11a/0x1d0 [ses] [<ffffffffa00c8e08>] ses_intf_add+0x2c8/0x5c0 [ses] [<ffffffff8125327a>] ? kobject_get+0x1a/0x30 [<ffffffff814e8b56>] ? add_tail+0x36/0x50 [<ffffffff81345ae4>] device_add+0x2d4/0x380 [<ffffffff8136b096>] scsi_sysfs_add_sdev+0xe6/0x2a0 [<ffffffff813682cc>] scsi_add_lun+0x41c/0x560 [<ffffffff81368a80>] scsi_probe_and_add_lun+0x1e0/0x3e0 [<ffffffff81041009>] ? default_spin_lock_flags+0x9/0x10 [<ffffffff813696e7>] __scsi_scan_target+0xe7/0x120 [<ffffffff81369b8d>] scsi_scan_target+0xcd/0xf0 [<ffffffffa003faab>] sas_rphy_add+0x11b/0x170 [scsi_transport_sas] [<ffffffffa009a74f>] mpt2sas_transport_port_add+0x2cf/0x430 [mpt2sas] [<ffffffffa008d437>] _scsih_sas_device_add+0x87/0x110 [mpt2sas] [<ffffffffa0094eb8>] _scsih_add_device+0x248/0x340 [mpt2sas] [<ffffffffa0098cb1>] ? mpt2sas_transport_update_links+0xf1/0x190 [mpt2sas] [<ffffffffa00977b6>] _scsih_sas_topology_change_event+0x3c6/0x490 [mpt2sas] [<ffffffff81080698>] ? add_timer+0x18/0x20 [<ffffffff8108a405>] ? queue_delayed_work_on+0xc5/0x170 [<ffffffffa0097a85>] _mpt2sas_fw_work+0x205/0x240 [mpt2sas] [<ffffffffa0097ad9>] _firmware_event_work_delayed+0x19/0x20 [mpt2sas] [<ffffffff8108c0d9>] process_one_work+0xf9/0x370 [<ffffffffa0097ad9>] _firmware_event_work_delayed+0x19/0x20 [mpt2sas] [<ffffffff8108c0d9>] process_one_work+0xf9/0x370 [<ffffffffa0097ac0>] ? _mpt2sas_fw_work+0x240/0x240 [mpt2sas] [<ffffffff8108ca1a>] worker_thread+0xca/0x240 [<ffffffff8108c950>] ? manage_workers+0x90/0x90 [<ffffffff81090ff7>] kthread+0x97/0xa0 [<ffffffff8150fdc4>] kernel_thread_helper+0x4/0x10 [<ffffffff81090f60>] ? kthread_bind+0x80/0x80 [<ffffffff8150fdc0>] ? gs_change+0x13/0x13 ---[ end trace 89a1351702ab360f ]---
[ses_enclosure_find_by_addr] call enclosure_add_device(edev=ffff8817e4094000,i=4,efd->dev=ffff8817e8304938),cdev=ffff8817e4094cd0
Per above message you can see the last tried for enclosure_device:HDD10, the index of component is not same then conflicted.
BTW, 6:0:27:0 and 7:0:27:0 are same disk.
Quoted 15 lines
Quoted 15 lines
Quoted 15 lines
Cc James Bottomley <[email protected]>Signed-off-by Joe Jin <[email protected]>--- drivers/misc/enclosure.c | 7 +++++++ 1 file changed, 7 insertions(+)drivers/misc/enclosure.c +0
-0@@ -325,6 +325,13 @@ int enclosure_add_device(struct enclosure_device *edev, int component,if (cdev->dev)enclosure_remove_links (cdev);
Quoted 2 lines
Quoted 1 line
drivers/misc/enclosure.c int enclosure_add_device(struct enclosure_device *edev, int component, · line 328
Quoted 1 line
drivers/misc/enclosure.c +1
-0+if (dev) {This test is pointless. Adding a NULL device is illegal.
Yes this is right.
Thanks,
Joe
Quoted 12 lines
Quoted 5 lines
drivers/misc/enclosure.c int enclosure_add_device(struct enclosure_device *edev, int component, · line 332
Quoted 5 lines
drivers/misc/enclosure.c +4
-0+char name[ENCLOSURE_NAME_SIZE ]; + +enclosure_link_name (cdev, name); +sysfs_remove_link (&dev->kobj, name);If we're really going to force eject the device, then this should be
enclosure_remove_device(edev, dev);How do you prevent the case for remove re-add in the same slot? Surely in that case, with your code, the link will get removed again when the remove gets processed, so the slot will then look empty (even though it's not).