Skip to contentSkip to conversation

Warning when hot-add an ACPI0004 device.

Bug report Tang Chen 4 participants 7 messages Sep 12, 2013 – Sep 26, 2013 ACPI

lore
Share & tools
lore

Tang Chen

author Acked-by Toshi Kani Tested-by Toshi Kani
#0 lore raw

Hi Rafael, Toshi,

When we hot-add an ACPI0004 device, we got the following warning:

acpi ACPI0004:01: Attempt to re-insert

The ACPI0004 device is a System Board in Fujitsu server, which has two numa nodes (processors and memory).

It seems that we reserved the ACPI_NOTIFY_DEVICE_CHECK event twice in acpi_hotplug_notify_cb().

According to bisect, this happens after the following commit:

From 68a67f6c78b80525d9b3c6672e7782de95e56a83 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <[email protected]>
Date: Sun, 3 Mar 2013 23:05:55 +0100
Subject: [PATCH 1/1] ACPI / container: Use common hotplug code

Switch the ACPI container driver to using common device hotplug code introduced previously. This reduces the driver down to a trivial definition and registration of a struct acpi_scan_handler object.

---
 drivers/acpi/container.c | 146 
++++-------------------------------------------
 1 file changed, 10 insertions(+), 136 deletions(-)

I'm now investigating this problem. If you have any idea about why this happens, please let me know.

Thanks. :)

#1 lore raw
Quoted 27 lines · Tang Chen

Hi Rafael, Toshi,

When we hot-add an ACPI0004 device, we got the following warning:

acpi ACPI0004:01: Attempt to re-insert

The ACPI0004 device is a System Board in Fujitsu server, which has two numa nodes (processors and memory).

It seems that we reserved the ACPI_NOTIFY_DEVICE_CHECK event twice in acpi_hotplug_notify_cb().

According to bisect, this happens after the following commit:

From 68a67f6c78b80525d9b3c6672e7782de95e56a83 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <[email protected]>
Date: Sun, 3 Mar 2013 23:05:55 +0100
Subject: [PATCH 1/1] ACPI / container: Use common hotplug code

Switch the ACPI container driver to using common device hotplug code introduced previously. This reduces the driver down to a trivial definition and registration of a struct acpi_scan_handler object.

Quoted 8 lines
---
  drivers/acpi/container.c | 146 
++++-------------------------------------------
  1 file changed, 10 insertions(+), 136 deletions(-)

I'm now investigating this problem. If you have any idea about why this happens, please let me know.

With the above change, container devices use the common notify handler, which logs the warning message in question when it receives device check twice on a same device. Before the change, the container-specific notify handler did not log this message in the same case (but considered it as an eject request).

So, I suspect that you are getting device check twice regardless of the kernel change. Can you check KERN_DEBUG messages to see if that is the case? The notify handler logs all events with KERN_DEBUG.

Thanks,
-Toshi

#2 lore raw

Hi Toshi,

Quoted 43 lines · Toshi Kani
Quoted 27 lines · Tang Chen

Hi Rafael, Toshi,

When we hot-add an ACPI0004 device, we got the following warning:

acpi ACPI0004:01: Attempt to re-insert

The ACPI0004 device is a System Board in Fujitsu server, which has two numa nodes (processors and memory).

It seems that we reserved the ACPI_NOTIFY_DEVICE_CHECK event twice in acpi_hotplug_notify_cb().

According to bisect, this happens after the following commit:

From 68a67f6c78b80525d9b3c6672e7782de95e56a83 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <[email protected]>
Date: Sun, 3 Mar 2013 23:05:55 +0100
Subject: [PATCH 1/1] ACPI / container: Use common hotplug code

Switch the ACPI container driver to using common device hotplug code introduced previously. This reduces the driver down to a trivial definition and registration of a struct acpi_scan_handler object.

Quoted 8 lines
---
  drivers/acpi/container.c | 146 
++++-------------------------------------------
  1 file changed, 10 insertions(+), 136 deletions(-)

I'm now investigating this problem. If you have any idea about why this happens, please let me know.

With the above change, container devices use the common notify handler, which logs the warning message in question when it receives device check twice on a same device. Before the change, the container-specific notify handler did not log this message in the same case (but considered it as an eject request).

Quoted 3 lines

So, I suspect that you are getting device check twice regardless of the kernel change. Can you check KERN_DEBUG messages to see if that is the case? The notify handler logs all events with KERN_DEBUG.

Follow your suggestion, we confirm that it really received ACPI_NOTIFY_ DEVICE_CHECK event*twice*, but the original ACPI container driver only received once, does the common device hotplug code introduce another device check? any idea?

Container uses common device hotplug code:

[  142.937724] IPv6: ADDRCONF(NETDEV_CHANGE): eth8: link becomes ready
[  674.975575] ACPI: \_SB_.LSB1: ACPI_NOTIFY_DEVICE_CHECK event          <<<<
[  674.991604] ACPI: \_SB_.LSB1: ACPI_NOTIFY_DEVICE_CHECK event		 <<<<	
[  675.613990] ACPI: PCI Root Bridge [UNC2] (domain 0000 [bus fd])
[  675.684970] acpi PNP0A03:01: ACPI _OSC support notification failed, disabling PCIe ASPM
[  675.780957] acpi PNP0A03:01: Unable to request _OSC control (_OSC support mask: 0x08)
[  675.874806] ACPI _OSC control for PCIe not granted, disabling ASPM
[  675.949005] pci_bus 0000:fd: Allocating resources
[  675.960145] ACPI: PCI Root Bridge [UNC3] (domain 0000 [bus fc])
[  676.031176] acpi PNP0A03:02: ACPI _OSC support notification failed, disabling PCIe ASPM
[  676.127129] acpi PNP0A03:02: Unable to request _OSC control (_OSC support mask: 0x08)
[  676.220943] ACPI _OSC control for PCIe not granted, disabling ASPM
[  676.295019] pci_bus 0000:fc: Allocating resources

Original ACPI container driver:

[ 1526.122933] Container driver received ACPI_NOTIFY_DEVICE_CHECK event <<<<
[ 1526.800646] ACPI: PCI Root Bridge [UNC2] (domain 0000 [bus fd])
[ 1526.871682] acpi PNP0A03:01: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1526.967878] acpi PNP0A03:01: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1527.061891] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1527.136036] pci_bus 0000:fd: Allocating resources
[ 1527.150747] ACPI: PCI Root Bridge [UNC3] (domain 0000 [bus fc])
[ 1527.221821] acpi PNP0A03:02: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1527.317738] acpi PNP0A03:02: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1527.411795] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1527.485917] pci_bus 0000:fc: Allocating resources

Thanks,
Gu

Quoted 10 lines

Thanks,
-Toshi

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#3 lore raw
Quoted 47 lines · Gu Zheng

Hi Toshi,

Quoted 43 lines · Toshi Kani
Quoted 27 lines · Tang Chen

Hi Rafael, Toshi,

When we hot-add an ACPI0004 device, we got the following warning:

acpi ACPI0004:01: Attempt to re-insert

The ACPI0004 device is a System Board in Fujitsu server, which has two numa nodes (processors and memory).

It seems that we reserved the ACPI_NOTIFY_DEVICE_CHECK event twice in acpi_hotplug_notify_cb().

According to bisect, this happens after the following commit:

From 68a67f6c78b80525d9b3c6672e7782de95e56a83 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <[email protected]>
Date: Sun, 3 Mar 2013 23:05:55 +0100
Subject: [PATCH 1/1] ACPI / container: Use common hotplug code

Switch the ACPI container driver to using common device hotplug code introduced previously. This reduces the driver down to a trivial definition and registration of a struct acpi_scan_handler object.

Quoted 8 lines
---
  drivers/acpi/container.c | 146 
++++-------------------------------------------
  1 file changed, 10 insertions(+), 136 deletions(-)

I'm now investigating this problem. If you have any idea about why this happens, please let me know.

With the above change, container devices use the common notify handler, which logs the warning message in question when it receives device check twice on a same device. Before the change, the container-specific notify handler did not log this message in the same case (but considered it as an eject request).

Quoted 8 lines
Quoted 3 lines

So, I suspect that you are getting device check twice regardless of the kernel change. Can you check KERN_DEBUG messages to see if that is the case? The notify handler logs all events with KERN_DEBUG.

Follow your suggestion, we confirm that it really received ACPI_NOTIFY_ DEVICE_CHECK event*twice*, but the original ACPI container driver only received once, does the common device hotplug code introduce another device check? any idea?

Well, we couldn't possibly make the BIOS generate the event twice unless there's an _OST response missing somewhere or similar.

In any case the second event should be harmless.

Quoted 4 lines

Container uses common device hotplug code:

[  142.937724] IPv6: ADDRCONF(NETDEV_CHANGE): eth8: link becomes ready
[  674.975575] ACPI: \_SB_.LSB1: ACPI_NOTIFY_DEVICE_CHECK event          <<<<
[  674.991604] ACPI: \_SB_.LSB1: ACPI_NOTIFY_DEVICE_CHECK event		 <<<<	

Where exactly did you put that printk()?

Quoted 11 lines
[  675.613990] ACPI: PCI Root Bridge [UNC2] (domain 0000 [bus fd])
[  675.684970] acpi PNP0A03:01: ACPI _OSC support notification failed, disabling PCIe ASPM
[  675.780957] acpi PNP0A03:01: Unable to request _OSC control (_OSC support mask: 0x08)
[  675.874806] ACPI _OSC control for PCIe not granted, disabling ASPM
[  675.949005] pci_bus 0000:fd: Allocating resources
[  675.960145] ACPI: PCI Root Bridge [UNC3] (domain 0000 [bus fc])
[  676.031176] acpi PNP0A03:02: ACPI _OSC support notification failed, disabling PCIe ASPM
[  676.127129] acpi PNP0A03:02: Unable to request _OSC control (_OSC support mask: 0x08)
[  676.220943] ACPI _OSC control for PCIe not granted, disabling ASPM
[  676.295019] pci_bus 0000:fc: Allocating resources
Quoted 2 lines

Original ACPI container driver:

[ 1526.122933] Container driver received ACPI_NOTIFY_DEVICE_CHECK event <<<<

And that?

Quoted 10 lines
[ 1526.800646] ACPI: PCI Root Bridge [UNC2] (domain 0000 [bus fd])
[ 1526.871682] acpi PNP0A03:01: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1526.967878] acpi PNP0A03:01: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1527.061891] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1527.136036] pci_bus 0000:fd: Allocating resources
[ 1527.150747] ACPI: PCI Root Bridge [UNC3] (domain 0000 [bus fc])
[ 1527.221821] acpi PNP0A03:02: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1527.317738] acpi PNP0A03:02: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1527.411795] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1527.485917] pci_bus 0000:fc: Allocating resources

Thanks,
Rafael

#5 lore raw
In reply to Gu Zheng
Quoted 51 lines · Gu Zheng

Hi Toshi,

Quoted 43 lines · Toshi Kani
Quoted 27 lines · Tang Chen

Hi Rafael, Toshi,

When we hot-add an ACPI0004 device, we got the following warning:

acpi ACPI0004:01: Attempt to re-insert

The ACPI0004 device is a System Board in Fujitsu server, which has two numa nodes (processors and memory).

It seems that we reserved the ACPI_NOTIFY_DEVICE_CHECK event twice in acpi_hotplug_notify_cb().

According to bisect, this happens after the following commit:

From 68a67f6c78b80525d9b3c6672e7782de95e56a83 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <[email protected]>
Date: Sun, 3 Mar 2013 23:05:55 +0100
Subject: [PATCH 1/1] ACPI / container: Use common hotplug code

Switch the ACPI container driver to using common device hotplug code introduced previously. This reduces the driver down to a trivial definition and registration of a struct acpi_scan_handler object.

Quoted 8 lines
---
  drivers/acpi/container.c | 146 
++++-------------------------------------------
  1 file changed, 10 insertions(+), 136 deletions(-)

I'm now investigating this problem. If you have any idea about why this happens, please let me know.

With the above change, container devices use the common notify handler, which logs the warning message in question when it receives device check twice on a same device. Before the change, the container-specific notify handler did not log this message in the same case (but considered it as an eject request).

Quoted 3 lines

So, I suspect that you are getting device check twice regardless of the kernel change. Can you check KERN_DEBUG messages to see if that is the case? The notify handler logs all events with KERN_DEBUG.

Quoted 8 lines

Follow your suggestion, we confirm that it really received ACPI_NOTIFY_ DEVICE_CHECK event*twice*, but the original ACPI container driver only received once, does the common device hotplug code introduce another device check? any idea?

Container uses common device hotplug code:

[  142.937724] IPv6: ADDRCONF(NETDEV_CHANGE): eth8: link becomes ready
[  674.975575] ACPI: \_SB_.LSB1: ACPI_NOTIFY_DEVICE_CHECK event          <<<<

acpi_hotplug_notify_cb() calls acpi_os_hotplug_execute() to schedule to run acpi_scan_device_check() asynchronously and returns immediately. This leads acpi_ev_asynch_enable_gpe() to run next, which clears this GPE (if level triggered) and re-enable GPE.

Quoted 1 line
[  674.991604] ACPI: \_SB_.LSB1: ACPI_NOTIFY_DEVICE_CHECK event		 <<<<	

It appears that re-enabling GPE caused this GPE to show up again as a spurious interrupt.

Quoted 11 lines
[  675.613990] ACPI: PCI Root Bridge [UNC2] (domain 0000 [bus fd])
[  675.684970] acpi PNP0A03:01: ACPI _OSC support notification failed, disabling PCIe ASPM
[  675.780957] acpi PNP0A03:01: Unable to request _OSC control (_OSC support mask: 0x08)
[  675.874806] ACPI _OSC control for PCIe not granted, disabling ASPM
[  675.949005] pci_bus 0000:fd: Allocating resources
[  675.960145] ACPI: PCI Root Bridge [UNC3] (domain 0000 [bus fc])
[  676.031176] acpi PNP0A03:02: ACPI _OSC support notification failed, disabling PCIe ASPM
[  676.127129] acpi PNP0A03:02: Unable to request _OSC control (_OSC support mask: 0x08)
[  676.220943] ACPI _OSC control for PCIe not granted, disabling ASPM
[  676.295019] pci_bus 0000:fc: Allocating resources
Quoted 2 lines

Original ACPI container driver:

[ 1526.122933] Container driver received ACPI_NOTIFY_DEVICE_CHECK event <<<<

In the original code, container_notify_cb() proceeds the device check handling and then calls _OST on the same thread. It then re-enable GPE. This ordering seems to avoid the spurious interrupt on your platform.

Quoted 10 lines
[ 1526.800646] ACPI: PCI Root Bridge [UNC2] (domain 0000 [bus fd])
[ 1526.871682] acpi PNP0A03:01: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1526.967878] acpi PNP0A03:01: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1527.061891] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1527.136036] pci_bus 0000:fd: Allocating resources
[ 1527.150747] ACPI: PCI Root Bridge [UNC3] (domain 0000 [bus fc])
[ 1527.221821] acpi PNP0A03:02: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1527.317738] acpi PNP0A03:02: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1527.411795] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1527.485917] pci_bus 0000:fc: Allocating resources

The GPE handler code in ACPICA is the same. So, the issue could be due to either;
- The firmware expects _OST before re-enabling GPE, or
- The timing of re-enabling GPE was too soon on your platform.

Can you check with your firmware team to see if this might be the case?

Thanks,
-Toshi

#6 lore raw

Hi Toshi,

Quoted 57 lines · Toshi Kani
Quoted 56 lines · Gu Zheng

Hi Toshi,

Quoted 43 lines · Toshi Kani
Quoted 27 lines · Tang Chen

Hi Rafael, Toshi,

When we hot-add an ACPI0004 device, we got the following warning:

acpi ACPI0004:01: Attempt to re-insert

The ACPI0004 device is a System Board in Fujitsu server, which has two numa nodes (processors and memory).

It seems that we reserved the ACPI_NOTIFY_DEVICE_CHECK event twice in acpi_hotplug_notify_cb().

According to bisect, this happens after the following commit:

From 68a67f6c78b80525d9b3c6672e7782de95e56a83 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <[email protected]>
Date: Sun, 3 Mar 2013 23:05:55 +0100
Subject: [PATCH 1/1] ACPI / container: Use common hotplug code

Switch the ACPI container driver to using common device hotplug code introduced previously. This reduces the driver down to a trivial definition and registration of a struct acpi_scan_handler object.

Quoted 8 lines
---
  drivers/acpi/container.c | 146 
++++-------------------------------------------
  1 file changed, 10 insertions(+), 136 deletions(-)

I'm now investigating this problem. If you have any idea about why this happens, please let me know.

With the above change, container devices use the common notify handler, which logs the warning message in question when it receives device check twice on a same device. Before the change, the container-specific notify handler did not log this message in the same case (but considered it as an eject request).

Quoted 3 lines

So, I suspect that you are getting device check twice regardless of the kernel change. Can you check KERN_DEBUG messages to see if that is the case? The notify handler logs all events with KERN_DEBUG.

Follow your suggestion, we confirm that it really received ACPI_NOTIFY_ DEVICE_CHECK event*twice*, but the original ACPI container driver only received once, does the common device hotplug code introduce another device check? any idea?

Quoted 8 lines
Quoted 3 lines

Container uses common device hotplug code:

[  142.937724] IPv6: ADDRCONF(NETDEV_CHANGE): eth8: link becomes ready
[  674.975575] ACPI: \_SB_.LSB1: ACPI_NOTIFY_DEVICE_CHECK event          <<<<

acpi_hotplug_notify_cb() calls acpi_os_hotplug_execute() to schedule to run acpi_scan_device_check() asynchronously and returns immediately. This leads acpi_ev_asynch_enable_gpe() to run next, which clears this GPE (if level triggered) and re-enable GPE.

Thanks for your explanation, it's really the routine you mentioned above.

Quoted 5 lines
Quoted 2 lines
[  674.991604] ACPI: \_SB_.LSB1: ACPI_NOTIFY_DEVICE_CHECK event		 <<<<	

It appears that re-enabling GPE caused this GPE to show up again as a spurious interrupt.

Yes, it is.

Quoted 12 lines
Quoted 12 lines
[  675.613990] ACPI: PCI Root Bridge [UNC2] (domain 0000 [bus fd])
[  675.684970] acpi PNP0A03:01: ACPI _OSC support notification failed, disabling PCIe ASPM
[  675.780957] acpi PNP0A03:01: Unable to request _OSC control (_OSC support mask: 0x08)
[  675.874806] ACPI _OSC control for PCIe not granted, disabling ASPM
[  675.949005] pci_bus 0000:fd: Allocating resources
[  675.960145] ACPI: PCI Root Bridge [UNC3] (domain 0000 [bus fc])
[  676.031176] acpi PNP0A03:02: ACPI _OSC support notification failed, disabling PCIe ASPM
[  676.127129] acpi PNP0A03:02: Unable to request _OSC control (_OSC support mask: 0x08)
[  676.220943] ACPI _OSC control for PCIe not granted, disabling ASPM
[  676.295019] pci_bus 0000:fc: Allocating resources
Quoted 5 lines
Quoted 2 lines

Original ACPI container driver:

[ 1526.122933] Container driver received ACPI_NOTIFY_DEVICE_CHECK event <<<<

In the original code, container_notify_cb() proceeds the device check handling and then calls _OST on the same thread. It then re-enable GPE.

According to our debug, the whole routine was executed on the same thread.

Quoted 1 line

This ordering seems to avoid the spurious interrupt on your platform.

It seems that, but it is very strange.

Quoted 12 lines
Quoted 11 lines
[ 1526.800646] ACPI: PCI Root Bridge [UNC2] (domain 0000 [bus fd])
[ 1526.871682] acpi PNP0A03:01: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1526.967878] acpi PNP0A03:01: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1527.061891] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1527.136036] pci_bus 0000:fd: Allocating resources
[ 1527.150747] ACPI: PCI Root Bridge [UNC3] (domain 0000 [bus fc])
[ 1527.221821] acpi PNP0A03:02: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1527.317738] acpi PNP0A03:02: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1527.411795] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1527.485917] pci_bus 0000:fc: Allocating resources
Quoted 4 lines

The GPE handler code in ACPICA is the same. So, the issue could be due to either;
- The firmware expects _OST before re-enabling GPE, or
- The timing of re-enabling GPE was too soon on your platform.

Thanks for your directions.

Quoted 2 lines

Can you check with your firmware team to see if this might be the case?

I'll confirm this.

Best regards,
Gu

Quoted 5 lines

Thanks,
-Toshi

#4 lore raw
In reply to Rafael J. Wysocki

Hi Rafael,

Quoted 11 lines · Rafael J. Wysocki
Quoted 10 lines · Gu Zheng

Hi Toshi,

Quoted 6 lines · Toshi Kani
Quoted 5 lines · Tang Chen

Hi Rafael, Toshi,

When we hot-add an ACPI0004 device, we got the following warning:

acpi ACPI0004:01: Attempt to re-insert

<...>

Quoted 20 lines
Quoted 11 lines
Quoted 11 lines
Quoted 4 lines

I'm now investigating this problem. If you have any idea about why this happens, please let me know.

With the above change, container devices use the common notify handler, which logs the warning message in question when it receives device check twice on a same device. Before the change, the container-specific notify handler did not log this message in the same case (but considered it as an eject request).

Quoted 8 lines
Quoted 3 lines

So, I suspect that you are getting device check twice regardless of the kernel change. Can you check KERN_DEBUG messages to see if that is the case? The notify handler logs all events with KERN_DEBUG.

Follow your suggestion, we confirm that it really received ACPI_NOTIFY_ DEVICE_CHECK event*twice*, but the original ACPI container driver only received once, does the common device hotplug code introduce another device check? any idea?

Quoted 4 lines

Well, we couldn't possibly make the BIOS generate the event twice unless there's an _OST response missing somewhere or similar.

In any case the second event should be harmless.

Yes, though it's harmless, but this message is not very friendly.

Quoted 7 lines
Quoted 5 lines

Container uses common device hotplug code:

[  142.937724] IPv6: ADDRCONF(NETDEV_CHANGE): eth8: link becomes ready
[  674.975575] ACPI: \_SB_.LSB1: ACPI_NOTIFY_DEVICE_CHECK event          <<<<
[  674.991604] ACPI: \_SB_.LSB1: ACPI_NOTIFY_DEVICE_CHECK event		 <<<<	

Where exactly did you put that printk()?

It's the acpi_handle_debug in acpi_hotplug_notify_cb():
410 case ACPI_NOTIFY_DEVICE_CHECK:

 411                 acpi_handle_debug(handle, "ACPI_NOTIFY_DEVICE_CHECK event\n");  
 412                 callback = acpi_scan_device_check;                              
 413                 break;  
Quoted 12 lines
Quoted 12 lines
[  675.613990] ACPI: PCI Root Bridge [UNC2] (domain 0000 [bus fd])
[  675.684970] acpi PNP0A03:01: ACPI _OSC support notification failed, disabling PCIe ASPM
[  675.780957] acpi PNP0A03:01: Unable to request _OSC control (_OSC support mask: 0x08)
[  675.874806] ACPI _OSC control for PCIe not granted, disabling ASPM
[  675.949005] pci_bus 0000:fd: Allocating resources
[  675.960145] ACPI: PCI Root Bridge [UNC3] (domain 0000 [bus fc])
[  676.031176] acpi PNP0A03:02: ACPI _OSC support notification failed, disabling PCIe ASPM
[  676.127129] acpi PNP0A03:02: Unable to request _OSC control (_OSC support mask: 0x08)
[  676.220943] ACPI _OSC control for PCIe not granted, disabling ASPM
[  676.295019] pci_bus 0000:fc: Allocating resources
Quoted 4 lines
Quoted 2 lines

Original ACPI container driver:

[ 1526.122933] Container driver received ACPI_NOTIFY_DEVICE_CHECK event <<<<

And that?

It seems that the original ACPI container driver can avoid the second event.

The debug printk is added in original container_notify_cb():
96 case ACPI_NOTIFY_DEVICE_CHECK:
97 printk("Container driver received %s event\n",
98 (type == ACPI_NOTIFY_BUS_CHECK) ?
99 "ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK");
100

101                 present = is_device_present(handle);
102                 status = acpi_bus_get_device(handle, &device);
103                 if (device)

104 printk("=======attemp to reinsert!\n");
105 if (!present) {

Best regards,
Gu

Quoted 16 lines
Quoted 11 lines
[ 1526.800646] ACPI: PCI Root Bridge [UNC2] (domain 0000 [bus fd])
[ 1526.871682] acpi PNP0A03:01: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1526.967878] acpi PNP0A03:01: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1527.061891] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1527.136036] pci_bus 0000:fd: Allocating resources
[ 1527.150747] ACPI: PCI Root Bridge [UNC3] (domain 0000 [bus fc])
[ 1527.221821] acpi PNP0A03:02: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 1527.317738] acpi PNP0A03:02: Unable to request _OSC control (_OSC support mask: 0x08)
[ 1527.411795] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1527.485917] pci_bus 0000:fc: Allocating resources

Thanks,
Rafael