DT: Add documentation for cm36651 proximity/light sensor
Subsystems (2)
PATCH v3 2/2 DT: Add documentation for cm36651 proximity/light sensor
This patch add device tree binding documentation for CM36651 proximity/ light sensor.
Signed-off-by Beomho Seo <[email protected]>
--- .../devicetree/bindings/iio/light/cm36651.txt | 25 ++++++++++++++++++++ .../devicetree/bindings/vendor-prefixes.txt | 1 + 2 files changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/light/cm36651.txt
Documentation/devicetree/bindings/iio/light/cm36651.txt new file +25 -0
@@ -0,0 +1,25 @@ +* Capella CM36651 I2C Proximity and Color Light sensor + +Required properties: +- compatible: must be "capella,cm36651" +- reg: the I2C address of the device +- interrupts: interrupt-specifier for the sole interrupt + generated by the device +- vled-supply: regulator for the sensor device, as covered + in ../../regulator/regulator.txt + +Example: + + i2c_cm36651: i2c-gpio { + /* ... */ + + cm36651@18 { + compatible = "capella,cm36651"; + reg = <0x18>; + interrupt-parent = <&gpx0>; + interrupts = <2 0>; + vled-supply = <&ps_als_reg>; + }; + + /* ... */ + };
Documentation/devicetree/bindings/vendor-prefixes.txt +1 -0
@@ -15,6 +15,7 @@ atmel Atmel Corporation avago Avago Technologies bosch Bosch Sensortec GmbH brcm Broadcom Corporation +capella Capella Microsystems, Inc cavium Cavium, Inc. chrp Common Hardware Reference Platform cirrus Cirrus Logic, Inc.
Signature · 8 lines
1.7.9.5 -- Best Regards, Beomho Seo, Assistant Engineer System S/W Lab., S/W Platform Team, Software Center Samsung Electronics
Quoted 16 lines · Beomho Seo
This patch add device tree binding documentation for CM36651 proximity/ light sensor.
Signed-off-by Beomho Seo <[email protected]>--- .../devicetree/bindings/iio/light/cm36651.txt | 25 ++++++++++++++++++++ .../devicetree/bindings/vendor-prefixes.txt | 1 + 2 files changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/light/cm36651.txtDocumentation/devicetree/bindings/iio/light/cm36651.txt new file +0
-0
Documentation/devicetree/bindings/iio/light/cm36651.txt line 9
Quoted 9 lines
Documentation/devicetree/bindings/iio/light/cm36651.txt new file +9
-0@@ -0,0 +1,25 @@ +* Capella CM36651 I2C Proximity and Color Light sensor + +Required properties: +- compatible: must be "capella,cm36651" +- reg: the I2C address of the device +- interrupts: interrupt-specifier for the sole interrupt + generated by the device +- vled-supply: regulator for the sensor device, as covered + in ../../regulator/regulator.txt
Mark brought this up before...
The description needs to mention this if for an LED associated with (or integrated in?) the device, used exclusively for proximity detection.
Quoted 29 lines
Documentation/devicetree/bindings/iio/light/cm36651.txt new file +16
-0+ +Example: + + i2c_cm36651: i2c-gpio { + /* ... */ + + cm36651@18 { + compatible = "capella,cm36651"; + reg = <0x18>; + interrupt-parent = <&gpx0>; + interrupts = <2 0>; + vled-supply = <&ps_als_reg>; + }; + + /* ... */ + };Documentation/devicetree/bindings/vendor-prefixes.txt +1
-0@@ -15,6 +15,7 @@ atmel Atmel Corporation avago Avago Technologies bosch Bosch Sensortec GmbH brcm Broadcom Corporation +capella Capella Microsystems, Inc cavium Cavium, Inc. chrp Common Hardware Reference Platform cirrus Cirrus Logic, Inc.