pm80xx: 4G boundary fix
Subsystems (2)
PATCH v2 9/10 pm80xx: 4G boundary fix
Quoted 1 line
From
4715339743d45a6ef862bc0f5d5ec404b4667f94Mon Sep 17 00:00:00 2001
From: Anand Kumar Santhanam <[email protected]>
Date: Wed, 18 Sep 2013 11:14:54 +0530
Subject: [PATCH V2 09/10] pm80xx: 4G boundary fix.
--- drivers/scsi/pm8001/pm80xx_hwi.c | 103 +++++++++++++++++++++++++++++++++++++- 1 files changed, 101 insertions(+), 2 deletions(-)
drivers/scsi/pm8001/pm80xx_hwi.c +101 -2
@@ -3713,7 +3713,8 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,struct ssp_ini_io_start_req ssp_cmd;u32 tag = ccb->ccb_tag;int ret; -u64 phys_addr; +u64 phys_addr, start_addr, end_addr; +u32 end_addr_high, end_addr_low;struct inbound_queue_table *circularQ;u32 q_index;u32 opc =OPC_INB_SSPINIIOSTART ;
@@ -3767,6 +3768,30 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,cpu_to_le32 (upper_32_bits (dma_addr)); ssp_cmd.enc_len =cpu_to_le32 (task->total_xfer_len); ssp_cmd.enc_esgl =0 ; +/* Check 4G Boundary */ + start_addr =cpu_to_le64 (dma_addr); + end_addr = (start_addr + ssp_cmd.enc_len) -1 ; + end_addr_low =cpu_to_le32 (lower_32_bits (end_addr)); + end_addr_high =cpu_to_le32 (upper_32_bits (end_addr)); +if (end_addr_high != ssp_cmd.enc_addr_high) { +PM8001_FAIL_DBG (pm8001_ha, +pm8001_printk ("The sg list address " +"start_addr=0x%016llx data_len=0x%x " +"end_addr_high=0x%08x end_addr_low=" +"0x%08x has crossed 4G boundary\n" , + start_addr, ssp_cmd.enc_len, + end_addr_high, end_addr_low)); +pm8001_chip_make_sg (task->scatter,1 , + ccb->buf_prd); + phys_addr = ccb->ccb_dma_handle + + offsetof(struct pm8001_ccb_info , + buf_prd[0]); + ssp_cmd.enc_addr_low = +cpu_to_le32 (lower_32_bits (phys_addr)); + ssp_cmd.enc_addr_high = +cpu_to_le32 (upper_32_bits (phys_addr)); + ssp_cmd.enc_esgl =cpu_to_le32 (1 <<31 ); + } }else if (task->num_scatter ==0 ) { ssp_cmd.enc_addr_low =0 ; ssp_cmd.enc_addr_high =0 ;
@@ -3802,6 +3827,30 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,cpu_to_le32 (upper_32_bits (dma_addr)); ssp_cmd.len =cpu_to_le32 (task->total_xfer_len); ssp_cmd.esgl =0 ; +/* Check 4G Boundary */ + start_addr =cpu_to_le64 (dma_addr); + end_addr = (start_addr + ssp_cmd.len) -1 ; + end_addr_low =cpu_to_le32 (lower_32_bits (end_addr)); + end_addr_high =cpu_to_le32 (upper_32_bits (end_addr)); +if (end_addr_high != ssp_cmd.addr_high) { +PM8001_FAIL_DBG (pm8001_ha, +pm8001_printk ("The sg list address " +"start_addr=0x%016llx data_len=0x%x " +"end_addr_high=0x%08x end_addr_low=" +"0x%08x has crossed 4G boundary\n" , + start_addr, ssp_cmd.len, + end_addr_high, end_addr_low)); +pm8001_chip_make_sg (task->scatter,1 , + ccb->buf_prd); + phys_addr = ccb->ccb_dma_handle + + offsetof(struct pm8001_ccb_info , + buf_prd[0]); + ssp_cmd.addr_low = +cpu_to_le32 (lower_32_bits (phys_addr)); + ssp_cmd.addr_high = +cpu_to_le32 (upper_32_bits (phys_addr)); + ssp_cmd.esgl =cpu_to_le32 (1 <<31 ); + } }else if (task->num_scatter ==0 ) { ssp_cmd.addr_low =0 ; ssp_cmd.addr_high =0 ;
@@ -3826,7 +3875,8 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,u32 q_index;struct sata_start_req sata_cmd;u32 hdr_tag, ncg_tag =0 ; -u64 phys_addr; +u64 phys_addr, start_addr, end_addr; +u32 end_addr_high, end_addr_low;u32 ATAP =0x0 ;u32 dir;struct inbound_queue_table *circularQ;
@@ -3895,6 +3945,31 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, sata_cmd.enc_addr_high =upper_32_bits (dma_addr); sata_cmd.enc_len =cpu_to_le32 (task->total_xfer_len); sata_cmd.enc_esgl =0 ; +/* Check 4G Boundary */ + start_addr =cpu_to_le64 (dma_addr); + end_addr = (start_addr + sata_cmd.enc_len) -1 ; + end_addr_low =cpu_to_le32 (lower_32_bits (end_addr)); + end_addr_high =cpu_to_le32 (upper_32_bits (end_addr)); +if (end_addr_high != sata_cmd.enc_addr_high) { +PM8001_FAIL_DBG (pm8001_ha, +pm8001_printk ("The sg list address " +"start_addr=0x%016llx data_len=0x%x " +"end_addr_high=0x%08x end_addr_low" +"=0x%08x has crossed 4G boundary\n" , + start_addr, sata_cmd.enc_len, + end_addr_high, end_addr_low)); +pm8001_chip_make_sg (task->scatter,1 , + ccb->buf_prd); + phys_addr = ccb->ccb_dma_handle + + offsetof(struct pm8001_ccb_info , + buf_prd[0]); + sata_cmd.enc_addr_low = +lower_32_bits (phys_addr); + sata_cmd.enc_addr_high = +upper_32_bits (phys_addr); + sata_cmd.enc_esgl = +cpu_to_le32 (1 <<31 ); + } }else if (task->num_scatter ==0 ) { sata_cmd.enc_addr_low =0 ; sata_cmd.enc_addr_high =0 ;
@@ -3936,6 +4011,30 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, sata_cmd.addr_high =upper_32_bits (dma_addr); sata_cmd.len =cpu_to_le32 (task->total_xfer_len); sata_cmd.esgl =0 ; +/* Check 4G Boundary */ + start_addr =cpu_to_le64 (dma_addr); + end_addr = (start_addr + sata_cmd.len) -1 ; + end_addr_low =cpu_to_le32 (lower_32_bits (end_addr)); + end_addr_high =cpu_to_le32 (upper_32_bits (end_addr)); +if (end_addr_high != sata_cmd.addr_high) { +PM8001_FAIL_DBG (pm8001_ha, +pm8001_printk ("The sg list address " +"start_addr=0x%016llx data_len=0x%x" +"end_addr_high=0x%08x end_addr_low=" +"0x%08x has crossed 4G boundary\n" , + start_addr, sata_cmd.len, + end_addr_high, end_addr_low)); +pm8001_chip_make_sg (task->scatter,1 , + ccb->buf_prd); + phys_addr = ccb->ccb_dma_handle + + offsetof(struct pm8001_ccb_info , + buf_prd[0]); + sata_cmd.addr_low = +lower_32_bits (phys_addr); + sata_cmd.addr_high = +upper_32_bits (phys_addr); + sata_cmd.esgl =cpu_to_le32 (1 <<31 ); + } }else if (task->num_scatter ==0 ) { sata_cmd.addr_low =0 ; sata_cmd.addr_high =0 ;
Signature · 1 line
1.7.1
Quoted 7 lines · Anand
From
4715339743d45a6ef862bc0f5d5ec404b4667f94Mon Sep 17 00:00:00 2001
From: Anand Kumar Santhanam <[email protected]>
Date: Wed, 18 Sep 2013 11:14:54 +0530
Subject: [PATCH V2 09/10] pm80xx: 4G boundary fix.Signed-off-by [email protected]
Please give more description why you do this change?
Thanks
Jack
Quoted 154 lines
--- drivers/scsi/pm8001/pm80xx_hwi.c | 103 +++++++++++++++++++++++++++++++++++++- 1 files changed, 101 insertions(+), 2 deletions(-)drivers/scsi/pm8001/pm80xx_hwi.c +101
-2@@ -3713,7 +3713,8 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,struct ssp_ini_io_start_req ssp_cmd;u32 tag = ccb->ccb_tag;int ret; -u64 phys_addr; +u64 phys_addr, start_addr, end_addr; +u32 end_addr_high, end_addr_low;struct inbound_queue_table *circularQ;u32 q_index;u32 opc =OPC_INB_SSPINIIOSTART ;@@ -3767,6 +3768,30 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,cpu_to_le32 (upper_32_bits (dma_addr)); ssp_cmd.enc_len =cpu_to_le32 (task->total_xfer_len); ssp_cmd.enc_esgl =0 ; +/* Check 4G Boundary */ + start_addr =cpu_to_le64 (dma_addr); + end_addr = (start_addr + ssp_cmd.enc_len) -1 ; + end_addr_low =cpu_to_le32 (lower_32_bits (end_addr)); + end_addr_high =cpu_to_le32 (upper_32_bits (end_addr)); +if (end_addr_high != ssp_cmd.enc_addr_high) { +PM8001_FAIL_DBG (pm8001_ha, +pm8001_printk ("The sg list address " +"start_addr=0x%016llx data_len=0x%x " +"end_addr_high=0x%08x end_addr_low=" +"0x%08x has crossed 4G boundary\n" , + start_addr, ssp_cmd.enc_len, + end_addr_high, end_addr_low)); +pm8001_chip_make_sg (task->scatter,1 , + ccb->buf_prd); + phys_addr = ccb->ccb_dma_handle + + offsetof(struct pm8001_ccb_info , + buf_prd[0]); + ssp_cmd.enc_addr_low = +cpu_to_le32 (lower_32_bits (phys_addr)); + ssp_cmd.enc_addr_high = +cpu_to_le32 (upper_32_bits (phys_addr)); + ssp_cmd.enc_esgl =cpu_to_le32 (1 <<31 ); + } }else if (task->num_scatter ==0 ) { ssp_cmd.enc_addr_low =0 ; ssp_cmd.enc_addr_high =0 ;@@ -3802,6 +3827,30 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,cpu_to_le32 (upper_32_bits (dma_addr)); ssp_cmd.len =cpu_to_le32 (task->total_xfer_len); ssp_cmd.esgl =0 ; +/* Check 4G Boundary */ + start_addr =cpu_to_le64 (dma_addr); + end_addr = (start_addr + ssp_cmd.len) -1 ; + end_addr_low =cpu_to_le32 (lower_32_bits (end_addr)); + end_addr_high =cpu_to_le32 (upper_32_bits (end_addr)); +if (end_addr_high != ssp_cmd.addr_high) { +PM8001_FAIL_DBG (pm8001_ha, +pm8001_printk ("The sg list address " +"start_addr=0x%016llx data_len=0x%x " +"end_addr_high=0x%08x end_addr_low=" +"0x%08x has crossed 4G boundary\n" , + start_addr, ssp_cmd.len, + end_addr_high, end_addr_low)); +pm8001_chip_make_sg (task->scatter,1 , + ccb->buf_prd); + phys_addr = ccb->ccb_dma_handle + + offsetof(struct pm8001_ccb_info , + buf_prd[0]); + ssp_cmd.addr_low = +cpu_to_le32 (lower_32_bits (phys_addr)); + ssp_cmd.addr_high = +cpu_to_le32 (upper_32_bits (phys_addr)); + ssp_cmd.esgl =cpu_to_le32 (1 <<31 ); + } }else if (task->num_scatter ==0 ) { ssp_cmd.addr_low =0 ; ssp_cmd.addr_high =0 ;@@ -3826,7 +3875,8 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,u32 q_index;struct sata_start_req sata_cmd;u32 hdr_tag, ncg_tag =0 ; -u64 phys_addr; +u64 phys_addr, start_addr, end_addr; +u32 end_addr_high, end_addr_low;u32 ATAP =0x0 ;u32 dir;struct inbound_queue_table *circularQ;@@ -3895,6 +3945,31 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, sata_cmd.enc_addr_high =upper_32_bits (dma_addr); sata_cmd.enc_len =cpu_to_le32 (task->total_xfer_len); sata_cmd.enc_esgl =0 ; +/* Check 4G Boundary */ + start_addr =cpu_to_le64 (dma_addr); + end_addr = (start_addr + sata_cmd.enc_len) -1 ; + end_addr_low =cpu_to_le32 (lower_32_bits (end_addr)); + end_addr_high =cpu_to_le32 (upper_32_bits (end_addr)); +if (end_addr_high != sata_cmd.enc_addr_high) { +PM8001_FAIL_DBG (pm8001_ha, +pm8001_printk ("The sg list address " +"start_addr=0x%016llx data_len=0x%x " +"end_addr_high=0x%08x end_addr_low" +"=0x%08x has crossed 4G boundary\n" , + start_addr, sata_cmd.enc_len, + end_addr_high, end_addr_low)); +pm8001_chip_make_sg (task->scatter,1 , + ccb->buf_prd); + phys_addr = ccb->ccb_dma_handle + + offsetof(struct pm8001_ccb_info , + buf_prd[0]); + sata_cmd.enc_addr_low = +lower_32_bits (phys_addr); + sata_cmd.enc_addr_high = +upper_32_bits (phys_addr); + sata_cmd.enc_esgl = +cpu_to_le32 (1 <<31 ); + } }else if (task->num_scatter ==0 ) { sata_cmd.enc_addr_low =0 ; sata_cmd.enc_addr_high =0 ;@@ -3936,6 +4011,30 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, sata_cmd.addr_high =upper_32_bits (dma_addr); sata_cmd.len =cpu_to_le32 (task->total_xfer_len); sata_cmd.esgl =0 ; +/* Check 4G Boundary */ + start_addr =cpu_to_le64 (dma_addr); + end_addr = (start_addr + sata_cmd.len) -1 ; + end_addr_low =cpu_to_le32 (lower_32_bits (end_addr)); + end_addr_high =cpu_to_le32 (upper_32_bits (end_addr)); +if (end_addr_high != sata_cmd.addr_high) { +PM8001_FAIL_DBG (pm8001_ha, +pm8001_printk ("The sg list address " +"start_addr=0x%016llx data_len=0x%x" +"end_addr_high=0x%08x end_addr_low=" +"0x%08x has crossed 4G boundary\n" , + start_addr, sata_cmd.len, + end_addr_high, end_addr_low)); +pm8001_chip_make_sg (task->scatter,1 , + ccb->buf_prd); + phys_addr = ccb->ccb_dma_handle + + offsetof(struct pm8001_ccb_info , + buf_prd[0]); + sata_cmd.addr_low = +lower_32_bits (phys_addr); + sata_cmd.addr_high = +upper_32_bits (phys_addr); + sata_cmd.esgl =cpu_to_le32 (1 <<31 ); + } }else if (task->num_scatter ==0 ) { sata_cmd.addr_low =0 ; sata_cmd.addr_high =0 ;
We will add description and resend the updated patch.
-----Original Message-----
From: Jack Wang [mailto:[email protected]]
Sent: Thursday, September 26, 2013 12:40 PM
To: Anand Kumar Santhanam
Cc: [email protected]; Sangeetha Gnanasekaran; Nikith Ganigarakoppal; Viswas G
Subject: Re: [PATCH V2 09/10] pm80xx: 4G boundary fix
Quoted 7 lines · Anand
From
4715339743d45a6ef862bc0f5d5ec404b4667f94Mon Sep 17 00:00:00 2001
From: Anand Kumar Santhanam <[email protected]>
Date: Wed, 18 Sep 2013 11:14:54 +0530
Subject: [PATCH V2 09/10] pm80xx: 4G boundary fix.Signed-off-by [email protected]
Please give more description why you do this change?
Thanks
Jack
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct
Quoted 11 lines
--- drivers/scsi/pm8001/pm80xx_hwi.c | 103 +++++++++++++++++++++++++++++++++++++- 1 files changed, 101 insertions(+), 2 deletions(-)drivers/scsi/pm8001/pm80xx_hwi.c +0
-0@@ -3713,7 +3713,8 @@ static int pm80xx_chip_ssp_io_req(struct
pm8001_hba_info *pm8001_ha,
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct
Quoted 10 lines
drivers/scsi/pm8001/pm80xx_hwi.c +2
-1struct ssp_ini_io_start_req ssp_cmd;u32 tag = ccb->ccb_tag;int ret; -u64 phys_addr; +u64 phys_addr, start_addr, end_addr; +u32 end_addr_high, end_addr_low;struct inbound_queue_table *circularQ;u32 q_index;u32 opc =OPC_INB_SSPINIIOSTART ;@@ -3767,6 +3768,30 @@ static int pm80xx_chip_ssp_io_req(struct
pm8001_hba_info *pm8001_ha,
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct · line 3769
Quoted 2 lines
drivers/scsi/pm8001/pm80xx_hwi.c +0
-0cpu_to_le32 (upper_32_bits (dma_addr)); ssp_cmd.enc_len =
cpu_to_le32(task->total_xfer_len);
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
Quoted 5 lines
drivers/scsi/pm8001/pm80xx_hwi.c +4
-0ssp_cmd.enc_esgl =0 ; +/* Check 4G Boundary */ + start_addr =cpu_to_le64 (dma_addr); + end_addr = (start_addr + ssp_cmd.enc_len) -1 ; + end_addr_low =
cpu_to_le32(lower_32_bits(end_addr));
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct · line 3775
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ end_addr_high =
cpu_to_le32(upper_32_bits(end_addr));
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
Quoted 3 lines
drivers/scsi/pm8001/pm80xx_hwi.c +3
-0+if (end_addr_high != ssp_cmd.enc_addr_high) { + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("The sg list
address "
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct · line 3779
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ "start_addr=0x%016llx
data_len=0x%x "
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct · line 3780
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ "end_addr_high=0x%08x
end_addr_low="
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct · line 3781
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ "0x%08x has crossed 4G
boundary\n",
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct · line 3782
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ start_addr,
ssp_cmd.enc_len,
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct · line 3783
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ end_addr_high,
end_addr_low));
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
Quoted 7 lines
drivers/scsi/pm8001/pm80xx_hwi.c +7
-0+pm8001_chip_make_sg (task->scatter,1 , + ccb->buf_prd); + phys_addr = ccb->ccb_dma_handle + + offsetof(struct pm8001_ccb_info , + buf_prd[0]); + ssp_cmd.enc_addr_low = +
cpu_to_le32(lower_32_bits(phys_addr));
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct · line 3792
Quoted 2 lines
drivers/scsi/pm8001/pm80xx_hwi.c +2
-0+ ssp_cmd.enc_addr_high = +
cpu_to_le32(upper_32_bits(phys_addr));
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct
Quoted 6 lines
drivers/scsi/pm8001/pm80xx_hwi.c +2
-0+ ssp_cmd.enc_esgl =cpu_to_le32 (1 <<31 ); + } }else if (task->num_scatter ==0 ) { ssp_cmd.enc_addr_low =0 ; ssp_cmd.enc_addr_high =0 ;@@ -3802,6 +3827,30 @@ static int pm80xx_chip_ssp_io_req(struct
pm8001_hba_info *pm8001_ha,
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
Quoted 7 lines
drivers/scsi/pm8001/pm80xx_hwi.c +4
-0cpu_to_le32 (upper_32_bits (dma_addr)); ssp_cmd.len =cpu_to_le32 (task->total_xfer_len); ssp_cmd.esgl =0 ; +/* Check 4G Boundary */ + start_addr =cpu_to_le64 (dma_addr); + end_addr = (start_addr + ssp_cmd.len) -1 ; + end_addr_low =
cpu_to_le32(lower_32_bits(end_addr));
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct · line 3834
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ end_addr_high =
cpu_to_le32(upper_32_bits(end_addr));
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
Quoted 3 lines
drivers/scsi/pm8001/pm80xx_hwi.c +3
-0+if (end_addr_high != ssp_cmd.addr_high) { + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("The sg list
address "
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct · line 3838
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ "start_addr=0x%016llx
data_len=0x%x "
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct · line 3839
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ "end_addr_high=0x%08x
end_addr_low="
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct · line 3840
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ "0x%08x has crossed 4G
boundary\n",
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct · line 3841
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ start_addr,
ssp_cmd.len,
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct · line 3842
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ end_addr_high,
end_addr_low));
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
Quoted 7 lines
drivers/scsi/pm8001/pm80xx_hwi.c +7
-0+pm8001_chip_make_sg (task->scatter,1 , + ccb->buf_prd); + phys_addr = ccb->ccb_dma_handle + + offsetof(struct pm8001_ccb_info , + buf_prd[0]); + ssp_cmd.addr_low = +
cpu_to_le32(lower_32_bits(phys_addr));
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct · line 3851
Quoted 2 lines
drivers/scsi/pm8001/pm80xx_hwi.c +2
-0+ ssp_cmd.addr_high = +
cpu_to_le32(upper_32_bits(phys_addr));
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_sata_req(struct
Quoted 6 lines
drivers/scsi/pm8001/pm80xx_hwi.c +2
-0+ ssp_cmd.esgl =cpu_to_le32 (1 <<31 ); + } }else if (task->num_scatter ==0 ) { ssp_cmd.addr_low =0 ; ssp_cmd.addr_high =0 ;@@ -3826,7 +3875,8 @@ static int pm80xx_chip_sata_req(struct
pm8001_hba_info *pm8001_ha,
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
Quoted 9 lines
drivers/scsi/pm8001/pm80xx_hwi.c +2
-1u32 q_index;struct sata_start_req sata_cmd;u32 hdr_tag, ncg_tag =0 ; -u64 phys_addr; +u64 phys_addr, start_addr, end_addr; +u32 end_addr_high, end_addr_low;u32 ATAP =0x0 ;u32 dir; struct inbound_queue_table *circularQ; @@ -3895,6 +3945,31 @@
static
Quoted 2 lines
int pm80xx_chip_sata_req(struct
pm8001_hba_info*pm8001_ha,
sata_cmd.enc_addr_high =
upper_32_bits(dma_addr);
Quoted 1 line
sata_cmd.enc_len =
cpu_to_le32(task->total_xfer_len);
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
Quoted 5 lines
drivers/scsi/pm8001/pm80xx_hwi.c +4
-0sata_cmd.enc_esgl =0 ; +/* Check 4G Boundary */ + start_addr =cpu_to_le64 (dma_addr); + end_addr = (start_addr + sata_cmd.enc_len) -1 ; + end_addr_low =
cpu_to_le32(lower_32_bits(end_addr));
drivers/scsi/pm8001/pm80xx_hwi.c
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ end_addr_high =
cpu_to_le32(upper_32_bits(end_addr));
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
Quoted 3 lines
drivers/scsi/pm8001/pm80xx_hwi.c +3
-0+if (end_addr_high != sata_cmd.enc_addr_high) { + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("The sg list
address "
drivers/scsi/pm8001/pm80xx_hwi.c
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ "start_addr=0x%016llx
data_len=0x%x "
drivers/scsi/pm8001/pm80xx_hwi.c
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ "end_addr_high=0x%08x
end_addr_low"
drivers/scsi/pm8001/pm80xx_hwi.c
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ "=0x%08x has crossed 4G
boundary\n",
drivers/scsi/pm8001/pm80xx_hwi.c
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ start_addr,
sata_cmd.enc_len,
drivers/scsi/pm8001/pm80xx_hwi.c
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ end_addr_high,
end_addr_low));
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
Quoted 4 lines
drivers/scsi/pm8001/pm80xx_hwi.c +4
-0+pm8001_chip_make_sg (task->scatter,1 , + ccb->buf_prd); + phys_addr = ccb->ccb_dma_handle + + offsetof(struct
pm8001_ccb_info,
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_sata_req(struct
Quoted 12 lines
drivers/scsi/pm8001/pm80xx_hwi.c +8
-0+ buf_prd[0]); + sata_cmd.enc_addr_low = +lower_32_bits (phys_addr); + sata_cmd.enc_addr_high = +upper_32_bits (phys_addr); + sata_cmd.enc_esgl = +cpu_to_le32 (1 <<31 ); + } }else if (task->num_scatter ==0 ) { sata_cmd.enc_addr_low =0 ; sata_cmd.enc_addr_high =0 ;@@ -3936,6 +4011,30 @@ static int pm80xx_chip_sata_req(struct
pm8001_hba_info *pm8001_ha,
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_sata_req(struct · line 4012
Quoted 2 lines
drivers/scsi/pm8001/pm80xx_hwi.c +0
-0sata_cmd.addr_high =upper_32_bits (dma_addr); sata_cmd.len =
cpu_to_le32(task->total_xfer_len);
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
Quoted 5 lines
drivers/scsi/pm8001/pm80xx_hwi.c +4
-0sata_cmd.esgl =0 ; +/* Check 4G Boundary */ + start_addr =cpu_to_le64 (dma_addr); + end_addr = (start_addr + sata_cmd.len) -1 ; + end_addr_low =
cpu_to_le32(lower_32_bits(end_addr));
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_sata_req(struct · line 4018
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ end_addr_high =
cpu_to_le32(upper_32_bits(end_addr));
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
Quoted 3 lines
drivers/scsi/pm8001/pm80xx_hwi.c +3
-0+if (end_addr_high != sata_cmd.addr_high) { + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("The sg list
address "
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_sata_req(struct · line 4022
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ "start_addr=0x%016llx
data_len=0x%x"
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_sata_req(struct · line 4023
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ "end_addr_high=0x%08x
end_addr_low="
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_sata_req(struct · line 4024
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ "0x%08x has crossed 4G
boundary\n",
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_sata_req(struct · line 4025
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ start_addr,
sata_cmd.len,
drivers/scsi/pm8001/pm80xx_hwi.c static int pm80xx_chip_sata_req(struct · line 4026
Quoted 1 line
drivers/scsi/pm8001/pm80xx_hwi.c +1
-0+ end_addr_high,
end_addr_low));
Quoted 15 lines
drivers/scsi/pm8001/pm80xx_hwi.c +11
-0+pm8001_chip_make_sg (task->scatter,1 , + ccb->buf_prd); + phys_addr = ccb->ccb_dma_handle + + offsetof(struct pm8001_ccb_info , + buf_prd[0]); + sata_cmd.addr_low = +lower_32_bits (phys_addr); + sata_cmd.addr_high = +upper_32_bits (phys_addr); + sata_cmd.esgl =cpu_to_le32 (1 <<31 ); + } }else if (task->num_scatter ==0 ) { sata_cmd.addr_low =0 ; sata_cmd.addr_high =0 ;