Skip to contentSkip to conversation

New: umount from disconnected USB causes kernel oops (fwd)

Bugme-new Martin J. Bligh 1 participant 1 message Nov 25, 2003

lore
Share & tools
lore
#0 lore raw

http://bugme.osdl.org/show_bug.cgi?id=1591

Summary: umount from disconnected USB causes kernel oops
Kernel Version: 2.6.0-test7
Status: NEW
Severity: low
Owner: [email protected]
Submitter: [email protected]

Distribution: Debian unstable (current)
Hardware Environment: x86 UMP, K7
Software Environment: bash, mount, usb-storage
Problem Description: umount from disconnected USB causes kernel oops

Steps to reproduce:

Insert USB camera, let it time out (10 min of no activity) so it disconnects from bus. If it was mounted somewhere and it disconnects, umount gives a kernel oops.

smartass:/home/lsa# mount 
/dev/ide/host0/bus0/target0/lun0/part5 on / type ext2 (rw,errors=remount-ro) 
proc on /proc type proc (rw) 
devpts on /dev/pts type devpts (rw,gid=5,mode=620) 
/dev/ide/host0/bus0/target0/lun0/part1 on /boot type ext3 (rw) 
/dev/ide/host0/bus0/target0/lun0/part6 on /var type ext3 (rw) 
/dev/ide/host0/bus0/target0/lun0/part3 on /var/log type ext3 (rw) 
/dev/ide/host0/bus0/target0/lun0/part7 on /home type ext3 (rw) 
/dev/ide/host0/bus0/target0/lun0/part8 on /data type ext3 (rw) 
/dev/ide/host0/bus0/target1/lun0/part1 on /video type ext3 (rw,nosuid,nodev) 
usbfs on /proc/bus/usb type usbfs (rw) 
none on /sys type sysfs (rw) 
/dev/scsi/host3/bus0/target0/lun0/part1 on /dimagex type vfat (rw) 
smartass:/home/lsa# umount /dimagex/ 
Speicherzugriffsfehler 
smartass:/home/lsa# umount /dimagex 
umount: /dev/scsi/host3/bus0/target0/lun0/part1: Nicht gefunden 
umount: /dimagex ist nicht eingehängt 
umount: /dev/scsi/host3/bus0/target0/lun0/part1: Nicht gefunden 
umount: /dimagex ist nicht eingehängt 
smartass:/home/lsa# umount /dimagex 
umount: /dimagex ist nicht eingehängt 
smartass:/home/lsa# mount 
/dev/ide/host0/bus0/target0/lun0/part5 on / type ext2 (rw,errors=remount-ro) 
proc on /proc type proc (rw) 
devpts on /dev/pts type devpts (rw,gid=5,mode=620) 
/dev/ide/host0/bus0/target0/lun0/part1 on /boot type ext3 (rw) 
/dev/ide/host0/bus0/target0/lun0/part6 on /var type ext3 (rw) 
/dev/ide/host0/bus0/target0/lun0/part3 on /var/log type ext3 (rw) 
/dev/ide/host0/bus0/target0/lun0/part7 on /home type ext3 (rw) 
/dev/ide/host0/bus0/target0/lun0/part8 on /data type ext3 (rw) 
/dev/ide/host0/bus0/target1/lun0/part1 on /video type ext3 (rw,nosuid,nodev) 
usbfs on /proc/bus/usb type usbfs (rw) 
none on /sys type sysfs (rw) 

(sysfs not used anywhere, devfsd running)

dmesg output:

hub 3-0:1.0: new USB device on port 2, assigned address 5 scsi3 : SCSI emulation for USB Mass Storage devices
Vendor: MINOLTA Model: MINOLTA DIMAGE X Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdd: 246016 512-byte hdwr sectors (126 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 1c 00 00
sdd: cache data unavailable
sdd: assuming drive cache: write through
/dev/scsi/host3/bus0/target0/lun0: p1
Attached scsi removable disk sdd at scsi3, channel 0, id 0, lun 0
WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 5
usb 3-2: USB disconnect, address 5

Unable to handle kernel NULL pointer dereference at virtual address 00000010 
 printing eip: 
e0b2dcc9 
*pde = 00000000 
Oops: 0000 [#1] 
CPU:    0 
EIP:    0060:[<e0b2dcc9>]    Not tainted 
EFLAGS: 00010286 

EIP is at scsi_device_put+0x15/0x94 [scsi_mod]
eax: e0b47560 ebx: c0d85b40 ecx: e0b47574 edx: e0b47560
esi: 00000000 edi: 00000003 ebp: dffe108c esp: cc1fbee0
ds: 007b es: 007b ss: 0068
Process umount (pid: 24073, threadinfo=cc1fa000 task=d80486a0)

Stack: c0d85b40 00000000 e09de657 00000000 dffe1080 d813fb80 c01521de 
dffe10cc 
       00000000 dffe10cc 00000000 dffe1280 cc1fa000 e09e1900 dffe128c c01521a4 
       dffe1080 00000003 dffe12cc 00000000 d62ba800 dffe1280 e0ac06c0 cc1fa000 
Call Trace: 
 [<e09de657>] sd_release+0x3f/0x74 [sd_mod] 
 [<c01521de>] blkdev_put+0x18e/0x1b0 
 [<c01521a4>] blkdev_put+0x154/0x1b0 
 [<c0150f87>] kill_block_super+0x23/0x2c 
 [<c0150302>] deactivate_super+0x42/0x80 
 [<c016383c>] sys_umount+0x34/0x7c 
 [<c01410e6>] do_munmap+0x106/0x148 
 [<c016388f>] sys_oldumount+0xb/0x10 
 [<c010b577>] syscall_call+0x7/0xb 
 
Code: 8b 46 10 8b 40 44 8b 00 85 c0 74 1f bb 00 e0 ff ff 21 e3 ff 
 <6>hub 3-0:1.0: new USB device on port 2, assigned address 6 

scsi4 : SCSI emulation for USB Mass Storage devices
Vendor: MINOLTA Model: MINOLTA DIMAGE X Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdd: 246016 512-byte hdwr sectors (126 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 1c 00 00
sdd: cache data unavailable
sdd: assuming drive cache: write through

(last lines are for reconnecting the USB camera).

then cat /proc/scsi/scsi just hangs forever.

 2221 pts/0    S      0:00  |   \_ /bin/bash 
 2953 pts/0    S      0:00  |   |   \_ bash 
24399 pts/0    D      0:00  |   |       \_ cat /proc/scsi/scsi 
# uname -a 
Linux smartass 2.6.0-test7-1-386 #1 Sun Oct 12 10:29:56 EST 2003 i686 GNU/Linux