Skip to contentSkip to conversation

: Mcspi/qspi conflicting configs leading to build failure.

U-Boot Sourav Poddar 2 participants 2 messages Oct 3, 2013

lore
Share & tools
lore
#0 lore raw

Hi Jagan,

If you see the mcspi defconfig(CONFIG_OMAP3_SPI), it is moved to common file "include/configs/ti_armv7_common.h" . But with this, now after adding qspi the build breaks like this..

ti_qspi.o: In function `spi_cs_is_valid':
/home/a0131647/clone/u-boot/drivers/spi/ti_qspi.c:108: multiple definition of `spi_cs_is_valid' omap3_spi.o:/home/a0131647/clone/u-boot/drivers/spi/omap3_spi.c:415:
first defined here
ti_qspi.o: In function `spi_cs_activate':
/home/a0131647/clone/u-boot/drivers/spi/ti_qspi.c:114: multiple definition of `spi_cs_activate' omap3_spi.o:/home/a0131647/clone/u-boot/drivers/spi/omap3_spi.c:419:
first defined here
ti_qspi.o: In function `spi_cs_deactivate':
/home/a0131647/clone/u-boot/drivers/spi/ti_qspi.c:120: multiple definition of `spi_cs_deactivate' omap3_spi.o:/home/a0131647/clone/u-boot/drivers/spi/omap3_spi.c:423:
first defined here
ti_qspi.o: In function `spi_init':
/home/a0131647/clone/u-boot/drivers/spi/ti_qspi.c:125: multiple definition of `spi_init'

As of now, I am tackling this by doing a undef CONFIG_OMAP3_SPI in my configs.

But, we should have a way to use both(spi/qspi) of them simultaneously ?

#1 lore raw
Quoted 25 lines · Sourav Poddar

Hi Jagan,

If you see the mcspi defconfig(CONFIG_OMAP3_SPI), it is moved to common file "include/configs/ti_armv7_common.h" . But with this, now after adding qspi the build breaks like this..

ti_qspi.o: In function `spi_cs_is_valid':
/home/a0131647/clone/u-boot/drivers/spi/ti_qspi.c:108: multiple definition of `spi_cs_is_valid' omap3_spi.o:/home/a0131647/clone/u-boot/drivers/spi/omap3_spi.c:415: first defined here
ti_qspi.o: In function `spi_cs_activate':
/home/a0131647/clone/u-boot/drivers/spi/ti_qspi.c:114: multiple definition of `spi_cs_activate' omap3_spi.o:/home/a0131647/clone/u-boot/drivers/spi/omap3_spi.c:419: first defined here
ti_qspi.o: In function `spi_cs_deactivate':
/home/a0131647/clone/u-boot/drivers/spi/ti_qspi.c:120: multiple definition of `spi_cs_deactivate' omap3_spi.o:/home/a0131647/clone/u-boot/drivers/spi/omap3_spi.c:423: first defined here
ti_qspi.o: In function `spi_init':
/home/a0131647/clone/u-boot/drivers/spi/ti_qspi.c:125: multiple definition of `spi_init'

Quoted 4 lines

As of now, I am tackling this by doing a undef CONFIG_OMAP3_SPI in my configs.

But, we should have a way to use both(spi/qspi) of them simultaneously ?

As of now there is no way to use both, will do it.. I will add it on TODO.

Signature · 8 lines
Thanks,
Jagan.
--------
Jagannadha Sutradharudu Teki,
E: jagannadh.teki at gmail.com, P: +91-9676773388
Engineer - System Software Hacker
U-boot - SPI Custodian and Zynq APSOC
Ln: http://www.linkedin.com/in/jaganteki