Skip to contentSkip to conversation

r8169: set tc_offset only if tally counter reset isn't supported

PATCH Applied Heiner Kallweit 2 participants 2 messages Dec 1, 2020 – Dec 2, 2020

Subsystems (3)
lore
Share & tools
lore

Heiner Kallweit

author maintainer
#0 lore raw

PATCH 1/1 r8169: set tc_offset only if tally counter reset isn't supported

On chip versions supporting tally counter reset we currently update the counters after a reset although we know all counters are zero. Skip this unnecessary step.

---
 drivers/net/ethernet/realtek/r8169_main.c | 25 ++++++++---------------
 1 file changed, 9 insertions(+), 16 deletions(-)
drivers/net/ethernet/realtek/r8169_main.c +9 -16
index 32a4c8c0b..3ef1b31c9 100644
@@ -1562,16 +1562,6 @@ static void rtl8169_do_counters(struct rtl8169_private *tp, u32 counter_cmd)
 	rtl_loop_wait_low(tp, &rtl_counters_cond, 10, 1000);
 }
 
-static void rtl8169_reset_counters(struct rtl8169_private *tp)
-{
-	/*
-	 * Versions prior to RTL_GIGA_MAC_VER_19 don't support resetting the
-	 * tally counters.
-	 */
-	if (tp->mac_version >= RTL_GIGA_MAC_VER_19)
-		rtl8169_do_counters(tp, CounterReset);
-}
-
 static void rtl8169_update_counters(struct rtl8169_private *tp)
 {
 	u8 val = RTL_R8(tp, ChipCmd);
@@ -1606,13 +1596,16 @@ static void rtl8169_init_counter_offsets(struct rtl8169_private *tp)
 	if (tp->tc_offset.inited)
 		return;
 
-	rtl8169_reset_counters(tp);
-	rtl8169_update_counters(tp);
+	if (tp->mac_version >= RTL_GIGA_MAC_VER_19) {
+		rtl8169_do_counters(tp, CounterReset);
+	} else {
+		rtl8169_update_counters(tp);
+		tp->tc_offset.tx_errors = counters->tx_errors;
+		tp->tc_offset.tx_multi_collision = counters->tx_multi_collision;
+		tp->tc_offset.tx_aborted = counters->tx_aborted;
+		tp->tc_offset.rx_missed = counters->rx_missed;
+	}
 
-	tp->tc_offset.tx_errors = counters->tx_errors;
-	tp->tc_offset.tx_multi_collision = counters->tx_multi_collision;
-	tp->tc_offset.tx_aborted = counters->tx_aborted;
-	tp->tc_offset.rx_missed = counters->rx_missed;
 	tp->tc_offset.inited = true;
 }
 
Signature · 1 line
2.29.2
maintainer Applied
#1 lore raw
Quoted 5 lines · On Tue, 1 Dec 2020 09:57:29 +0100 Heiner Kallweit wrote:

On chip versions supporting tally counter reset we currently update the counters after a reset although we know all counters are zero. Skip this unnecessary step.

Applied, thanks!