Question on TCQ/NCQ and write cache

Hello list,
did I understand correctly that the writes are acknowledged by the HDDs/SSDs when the data is on the write cache, and not on the platters, and this is independent from the current setting of NCQ (enabled / disabled)?
So the NCQ being enabled only allows to save the latency of the trip of the write commands on the wire up to the DRAM cache on the HDD plus the reception of an ack in the opposite direction (analogous to one round trip ping time in networking), by issuing multiple of them before receiving the first ack (analogous to the window of TCP)? So NCQ has nothing to do on write performance of the disk per-se?

I'm asking because browsing around I found this:
http://en.wikipedia.org/wiki/Native_Command_Queuing
see the image http://upload.wikimedia.org/wikipedia/commons/thumb/4/4a/NCQ.svg/300px-NCQ.svg.png

This apparently tells that the write order is strictly sequential in non-NCQ mode while it can be nonsequential with NCQ, but I'm starting to think this is wrong otherwise what would be the role of the drive's write cache?

(I am restricting the question to writes only for now)

Thank you
J.