Skip to contentSkip to conversation

IIO new drivers, features and cleanups for 3.13 - set 5

GIT PULL Jonathan Cameron 2 participants 2 messages Oct 27, 2013 IIO

lore
Share & tools
lore

Jonathan Cameron

author maintainer
#0 lore raw

The following changes since commit 207287595bb2e9070d45780382f115fcd42e893d:

staging: rtl8187se: checkpatch cleanups (2013-10-19 14:55:44 -0700)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-3.13e

for you to fetch changes up to e0203255415844d73b5f4bec9bc72903c8e49d8d:

iio: light: vcnl4000: Remove redundant code (2013-10-24 14:48:14 +0100)

----------------------------------------------------------------
Fifth round of IIO new drivers, cleanups and functionality for the 3.13 cycle.

New Driver
* Freescale mag3110 magnetometer driver.

New functionality
* Add LPS001WP support to the ST pressure driver.
* Allow the max1363 driver to use only smbus functions for 8 bit devices. This allows the driver to be used when more extensive i2c support is not available.

Cleanups
* Fix incorrect description of unit conversions in ak8975.
* Switch to pr_err in industrialio-core.c instead of direct printk calls.
* Some simple redundant error handling removal patches.
* Trivial warning suppression by adding brackets to a sizeof call.
* Drop redundant of_match_ptr casts in drivers that are dependent on OF supporting being present. The only purpose of the of_match_ptr wrapper was to make stubbing out of the relevant structures trivial.

Fixes
* Make MXS_LRADC depend on INPUT to avoid compile failures. This fixes an issue introduced in the previous pull in this cycle.

----------------------------------------------------------------
Denis CIOCCA (1):
iio:pressure: Adds LPS001WP support also on spi interface and Kconfig fix

Peter Meerwald (2):
iio: Correct description how to convert microtesla to gauss
iio: Add Freescale mag3110 magnetometer driver

Randy Dunlap (1):
staging/iio/adc: MXS_LRADC depends on INPUT

Sachin Kamat (12):
iio: adc: twl6030-gpadc: Remove redundant of_match_ptr
iio: adc: nau7802: Remove redundant of_match_ptr
iio: adc: ti_am335x_adc: Remove redundant of_match_ptr
iio: core: Use pr_err instead of printk
iio: core: Add misssing braces
iio: accel: kxsd9: Remove redundant variable
iio: adc: twl6030-gpadc: Remove redundant code
iio: dac: ad5421: Remove redundant code
iio: dac: ad5755: Remove redundant code
iio: dac: max517: Remove redundant variable
iio: dac: mcp4725: Remove redundant code
iio: light: vcnl4000: Remove redundant code

Vivien Didelot (1):
iio:adc:max1363 support SMBus for 8-bit devices

 drivers/iio/accel/kxsd9.c              |   7 +-
 drivers/iio/adc/max1363.c              |  76 +++++--
 drivers/iio/adc/nau7802.c              |   2 +-
 drivers/iio/adc/ti_am335x_adc.c        |   2 +-
 drivers/iio/adc/twl6030-gpadc.c        |   6 +-
 drivers/iio/dac/ad5421.c               |   8 +-
 drivers/iio/dac/ad5755.c               |   8 +-
 drivers/iio/dac/max517.c               |   9 +-
 drivers/iio/dac/mcp4725.c              |   8 +-
 drivers/iio/industrialio-core.c        |  13 +-
 drivers/iio/light/vcnl4000.c           |   6 +-
 drivers/iio/magnetometer/Kconfig       |  10 +
 drivers/iio/magnetometer/Makefile      |   1 +
 drivers/iio/magnetometer/ak8975.c      |   2 +-
 drivers/iio/magnetometer/mag3110.c     | 401 +++++++++++++++++++++++++++++++++
 drivers/iio/pressure/Kconfig           |   2 +-
 drivers/iio/pressure/st_pressure_spi.c |   1 +
 drivers/staging/iio/adc/Kconfig        |   1 +
 18 files changed, 489 insertions(+), 74 deletions(-)
 create mode 100644 drivers/iio/magnetometer/mag3110.c
#1 lore raw
Quoted 7 lines · Jonathan Cameron

The following changes since commit 207287595bb2e9070d45780382f115fcd42e893d:

staging: rtl8187se: checkpatch cleanups (2013-10-19 14:55:44 -0700)

are available in the git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-3.13e

Pulled and pushed out, thanks.

greg k-h