SDR API libv4lconvert remove packet headers in-Kernel or userspace
Hello
Should I feed whole raw USB packet to libv4lconvert or rip headers off inside Kernel and feed only data? It is very trivial to remove headers in kernel and in a case of USB it does not even cost about nothing as you have to mem copy data out from URB in any case (if you do it on that phase).
Lets take a most complex case I have. There is not only raw data, but some meta-data to process samples. In that case those samples are bit-shifted according to control bits in order to increase nominal sample resolution from 10 to 12 bits (not sure if it is bit shift or some other algo, but shifting bits sounds reasonable and testing against RF-signal generator results looked correct as it is now implemented).
So do I feed that whole USB packet to userspace or do I have to remove headers + do bit bit shifting and forward only raw samples to userspace?
That example could be found from:drivers/staging/media/msi3101/sdr-msi3101.c
Here is what on USB packet looks like:
+=============================================================== | 00-1023 | USB packet type '384' +=============================================================== | 00- 03 | sequence number of first sample in that USB packet +--------------------------------------------------------------- | 04- 15 | garbage +--------------------------------------------------------------- | 16- 175 | samples +--------------------------------------------------------------- | 176- 179 | control bits for previous samples +--------------------------------------------------------------- | 180- 339 | samples +--------------------------------------------------------------- | 340- 343 | control bits for previous samples +--------------------------------------------------------------- | 344- 503 | samples +--------------------------------------------------------------- | 504- 507 | control bits for previous samples +--------------------------------------------------------------- | 508- 667 | samples +--------------------------------------------------------------- | 668- 671 | control bits for previous samples +--------------------------------------------------------------- | 672- 831 | samples +--------------------------------------------------------------- | 832- 835 | control bits for previous samples +--------------------------------------------------------------- | 836- 995 | samples +--------------------------------------------------------------- | 996- 999 | control bits for previous samples +--------------------------------------------------------------- | 1000-1023 | garbage +---------------------------------------------------------------
regards
Antti
Signature · 1 line
http://palosaari.fi/
Quoted 15 lines · Antti Palosaari
Hello
Should I feed whole raw USB packet to libv4lconvert or rip headers off inside Kernel and feed only data? It is very trivial to remove headers in kernel and in a case of USB it does not even cost about nothing as you have to mem copy data out from URB in any case (if you do it on that phase).Lets take a most complex case I have. There is not only raw data, but some meta-data to process samples. In that case those samples are bit-shifted according to control bits in order to increase nominal sample resolution from 10 to 12 bits (not sure if it is bit shift or some other algo, but shifting bits sounds reasonable and testing against RF-signal generator results looked correct as it is now implemented).
Quoted 3 lines
So do I feed that whole USB packet to userspace or do I have to remove headers + do bit bit shifting and forward only raw samples to userspace?
I would definitely remove headers and any garbage but pass the rest to userspace as-is. There is quite a bit of conversion code in the example you pointed to, more than I feel belongs in the kernel, so moving that out to userspace makes sense IMHO.
Regards,
Hans
Quoted 45 lines
That example could be found from:
drivers/staging/media/msi3101/sdr-msi3101.cHere is what on USB packet looks like:
+=============================================================== | 00-1023 | USB packet type '384' +=============================================================== | 00- 03 | sequence number of first sample in that USB packet +--------------------------------------------------------------- | 04- 15 | garbage +--------------------------------------------------------------- | 16- 175 | samples +--------------------------------------------------------------- | 176- 179 | control bits for previous samples +--------------------------------------------------------------- | 180- 339 | samples +--------------------------------------------------------------- | 340- 343 | control bits for previous samples +--------------------------------------------------------------- | 344- 503 | samples +--------------------------------------------------------------- | 504- 507 | control bits for previous samples +--------------------------------------------------------------- | 508- 667 | samples +--------------------------------------------------------------- | 668- 671 | control bits for previous samples +--------------------------------------------------------------- | 672- 831 | samples +--------------------------------------------------------------- | 832- 835 | control bits for previous samples +--------------------------------------------------------------- | 836- 995 | samples +--------------------------------------------------------------- | 996- 999 | control bits for previous samples +--------------------------------------------------------------- | 1000-1023 | garbage +---------------------------------------------------------------regards
Antti