perf events: how to implement TLB misses as SW event ?
Today in the perfevents subsystem it looks like DTLB/ITLB misses are implemented as HW counter only.
On some processors, like PowerPC 8xx, there is no counter for that. However DTLB/ITLB misses are handled as exceptions via software, so we have an opportunity to implement a SW counter for that. What's the easiest/best way to implement it ?
Christophe
Quoted 6 lines · christophe leroy
Today in the perfevents subsystem it looks like DTLB/ITLB misses are implemented as HW counter only.
On some processors, like PowerPC 8xx, there is no counter for that. However DTLB/ITLB misses are handled as exceptions via software, so we have an opportunity to implement a SW counter for that.
What's the easiest/best way to implement it ?
The very easiest way would be to place a trace_event in your tlb miss handler.
_HOWEVER_ I suspect you're quite limited in what you can do from an actual tlb miss handler -- seeing as generating another miss from a miss-handler might be a bad thing.
So I suspect that'll not actually work.
You'll need to educate me a bit on what you can (and can not) do from a tlb miss handler on your platforms.
I'm assuming you have a limited fixed memory map to work from while in the tlb fault handler -- you need something like that for such a handler to run.
So one possible option would be to keep a free-running counter in whatever fixed mapped memory region you have, and read from that. This would allow you to implement a non-sampling software pmu for these events.
If you have means of raising an interrupt; or other means of causing some routine to run in a 'normal' context. You could implement a more complete counter.
For example, you could decrement your fixed map counter on each tlb miss, and when it hits 0, write some state -- eg. the instruction pointer of the instruction that caused the tlb miss -- into a related field in the fixed map and raise the interrupt.
You can then use this mechanism from either your hardware pmu driver or a separate pmu implementation as a 'regular' fixed purpose counter.
Since its all software, you can even implement whatever filters your hardware counters have to match its capabilities.