mqueue perf data
Hi Fengguang,
Do we need to stat out the perf data of mqueue test in kernel_selftests? It's like following.
Thanks,
Wanlong Gao
# make run_tests -C mqueue make: Entering directory `/git/linux/tools/testing/selftests/mqueue'
Initial system state:
Using queue path: /test1 RLIMIT_MSGQUEUE(soft): 819200 RLIMIT_MSGQUEUE(hard): 819200 Maximum Message Size: 8192 Maximum Queue Size: 10 Default Message Size: 8192 Default Queue Size: 10
Adjusted system state for testing:
RLIMIT_MSGQUEUE(soft): 819200 RLIMIT_MSGQUEUE(hard): 819200 Maximum Message Size: 8192 Maximum Queue Size: 10 Default Message Size: 8192 Default Queue Size: 10
Test series 1, behavior when no attr struct passed to mq_open:
Kernel supports setting defaults separately from maximums: PASS
Given sane values, mq_open without an attr struct succeeds: PASS
Kernel properly honors default setting knobs: PASS
Kernel properly limits default values to lesser of default/max: PASS
Kernel properly fails to create queue when defaults would
exceed rlimit: PASS
Test series 2, behavior when attr struct is passed to mq_open:
Queue open in excess of rlimit max when euid = 0 failed: PASS
Queue open with mq_maxmsg > limit when euid = 0 succeeded: PASS
Queue open with mq_msgsize > limit when euid = 0 succeeded: PASS
Queue open with total size > 2GB when euid = 0 failed: PASS
Queue open in excess of rlimit max when euid = 99 failed: PASS
Queue open with mq_maxmsg > limit when euid = 99 failed: PASS
Queue open with mq_msgsize > limit when euid = 99 failed: PASS
Queue open with total size > 2GB when euid = 99 failed: PASS
Initial system state:
Using queue path: /mq_perf_tests RLIMIT_MSGQUEUE(soft): 819200 RLIMIT_MSGQUEUE(hard): 819200 Maximum Message Size: 8192 Maximum Queue Size: 10 Nice value: 0
Adjusted system state for testing:
RLIMIT_MSGQUEUE(soft): (unlimited) RLIMIT_MSGQUEUE(hard): (unlimited) Maximum Message Size: 16777216 Maximum Queue Size: 65530 Nice value: -20 Continuous mode: (disabled) CPUs to pin: 3 Queue /mq_perf_tests created: mq_flags: O_NONBLOCK mq_maxmsg: 65530 mq_msgsize: 16 mq_curmsgs: 0 Started mqueue performance test thread on CPU 3 Max priorities: 32768 Clock resolution: 1 nsec Test #1: Time send/recv message, queue empty (10000000 iterations) Send msg: 4.50690280s total time 405 nsec/msg Recv msg: 4.123621560s total time 412 nsec/msg Test #2a: Time send/recv message, queue full, constant prio (100000 iterations) Filling queue...done. 0.14554407s Testing...done. Send msg: 0.40292962s total time 402 nsec/msg Recv msg: 0.40605786s total time 406 nsec/msg Draining queue...done. 0.15010003s Test #2b: Time send/recv message, queue full, increasing prio (100000 iterations) Filling queue...done. 0.25628197s Testing...done. Send msg: 0.53792862s total time 537 nsec/msg Recv msg: 0.52323416s total time 523 nsec/msg Draining queue...done. 0.17617835s Test #2c: Time send/recv message, queue full, decreasing prio (100000 iterations) Filling queue...done. 0.26939894s Testing...done. Send msg: 0.55733128s total time 557 nsec/msg Recv msg: 0.51363749s total time 513 nsec/msg Draining queue...done. 0.19254167s Test #2d: Time send/recv message, queue full, random prio (100000 iterations) Filling queue...done. 0.28530211s Testing...done. Send msg: 0.59583951s total time 595 nsec/msg Recv msg: 0.55122718s total time 551 nsec/msg Draining queue...done. 0.19537439s
make: Leaving directory `/git/linux/tools/testing/selftests/mqueue'
Quoted 5 lines · Wanlong Gao
Hi Fengguang,
Do we need to stat out the perf data of mqueue test in
kernel_selftests? It's like following.
They look like performance data, except that the test time is so short that I'm not sure they are reliable enough. If so, such lines with "speed" numbers are most interesting:
405 nsec/msg
Thanks,
Fengguang
Quoted 115 lines
# make run_tests -C mqueue make: Entering directory `/git/linux/tools/testing/selftests/mqueue'Initial system state:
Using queue path: /test1 RLIMIT_MSGQUEUE(soft): 819200 RLIMIT_MSGQUEUE(hard): 819200 Maximum Message Size: 8192 Maximum Queue Size: 10 Default Message Size: 8192 Default Queue Size: 10Adjusted system state for testing:
RLIMIT_MSGQUEUE(soft): 819200 RLIMIT_MSGQUEUE(hard): 819200 Maximum Message Size: 8192 Maximum Queue Size: 10 Default Message Size: 8192 Default Queue Size: 10Test series 1, behavior when no attr struct passed to
mq_open:
Kernel supports setting defaults separately from maximums: PASS
Given sane values,mq_openwithout an attr struct succeeds: PASS
Kernel properly honors default setting knobs: PASS
Kernel properly limits default values to lesser of default/max: PASS
Kernel properly fails to create queue when defaults would
exceed rlimit: PASSTest series 2, behavior when attr struct is passed to
mq_open:
Queue open in excess of rlimit max when euid = 0 failed: PASS
Queue open withmq_maxmsg> limit when euid = 0 succeeded: PASS
Queue open withmq_msgsize> limit when euid = 0 succeeded: PASS
Queue open with total size > 2GB when euid = 0 failed: PASS
Queue open in excess of rlimit max when euid = 99 failed: PASS
Queue open withmq_maxmsg> limit when euid = 99 failed: PASS
Queue open withmq_msgsize> limit when euid = 99 failed: PASS
Queue open with total size > 2GB when euid = 99 failed: PASSInitial system state:
Using queue path: /mq_perf_tests RLIMIT_MSGQUEUE(soft): 819200 RLIMIT_MSGQUEUE(hard): 819200 Maximum Message Size: 8192 Maximum Queue Size: 10 Nice value: 0Adjusted system state for testing:
RLIMIT_MSGQUEUE(soft): (unlimited) RLIMIT_MSGQUEUE(hard): (unlimited) Maximum Message Size: 16777216 Maximum Queue Size: 65530 Nice value: -20 Continuous mode: (disabled) CPUs to pin: 3 Queue /mq_perf_tests created: mq_flags: O_NONBLOCK mq_maxmsg: 65530 mq_msgsize: 16 mq_curmsgs: 0 Started mqueue performance test thread on CPU 3 Max priorities: 32768 Clock resolution: 1 nsec Test #1: Time send/recv message, queue empty (10000000 iterations) Send msg: 4.50690280s total time 405 nsec/msg Recv msg: 4.123621560s total time 412 nsec/msg Test #2a: Time send/recv message, queue full, constant prio (100000 iterations) Filling queue...done. 0.14554407s Testing...done. Send msg: 0.40292962s total time 402 nsec/msg Recv msg: 0.40605786s total time 406 nsec/msg Draining queue...done. 0.15010003s Test #2b: Time send/recv message, queue full, increasing prio (100000 iterations) Filling queue...done. 0.25628197s Testing...done. Send msg: 0.53792862s total time 537 nsec/msg Recv msg: 0.52323416s total time 523 nsec/msg Draining queue...done. 0.17617835s Test #2c: Time send/recv message, queue full, decreasing prio (100000 iterations) Filling queue...done. 0.26939894s Testing...done. Send msg: 0.55733128s total time 557 nsec/msg Recv msg: 0.51363749s total time 513 nsec/msg Draining queue...done. 0.19254167s Test #2d: Time send/recv message, queue full, random prio (100000 iterations) Filling queue...done. 0.28530211s Testing...done. Send msg: 0.59583951s total time 595 nsec/msg Recv msg: 0.55122718s total time 551 nsec/msg Draining queue...done. 0.19537439smake: Leaving directory `/git/linux/tools/testing/selftests/mqueue'