clk: initial support for Broadcom Kona clocks

Mike, please pull the following for 3.14. It adds clock support for Broadcom SoCs having "Kona" clock control units. Thanks.

-Alex

The following changes since commit 1459c837036a44e2dcf14a9452ed330201fb23b5:

clk: si570: Add a driver for SI570 oscillators (2013-12-14 21:01:35 -0800)

are available in the git repository at:

git://git.linaro.org/landing-teams/working/broadcom/kernel.git
pull/mturquette-kona-clocks

for you to fetch changes up to 143522e704d105bd2b3cbbca6e8fb2d217866ec0:

clk: bcm281xx: add initial clock framework support (2013-12-16
07:34:52 -0600)

----------------------------------------------------------------
Alex Elder (2):
clk: bcm281xx: define kona clock binding
clk: bcm281xx: add initial clock framework support

 .../devicetree/bindings/clock/bcm-kona-clock.txt   |   93 ++
 drivers/clk/Kconfig                                |    1 +
 drivers/clk/Makefile                               |    1 +
 drivers/clk/bcm/Kconfig                            |    8 +
 drivers/clk/bcm/Makefile                           |    3 +
 drivers/clk/bcm/clk-bcm281xx.c                     |  416 ++++++++
 drivers/clk/bcm/clk-kona-setup.c                   |  769 +++++++++++++++
 drivers/clk/bcm/clk-kona.c                         | 1033
++++++++++++++++++++
 drivers/clk/bcm/clk-kona.h                         |  414 ++++++++
 include/dt-bindings/clock/bcm281xx.h               |   65 ++
 10 files changed, 2803 insertions(+)
 create mode 100644
Documentation/devicetree/bindings/clock/bcm-kona-clock.txt
 create mode 100644 drivers/clk/bcm/Kconfig
 create mode 100644 drivers/clk/bcm/Makefile
 create mode 100644 drivers/clk/bcm/clk-bcm281xx.c
 create mode 100644 drivers/clk/bcm/clk-kona-setup.c
 create mode 100644 drivers/clk/bcm/clk-kona.c
 create mode 100644 drivers/clk/bcm/clk-kona.h
 create mode 100644 include/dt-bindings/clock/bcm281xx.h

Quoting Alex Elder (2013-12-16 07:26:29)

Pulled into clk-next.

Thanks!
Mike