pciehp: Don't check for adapter or latch status while disabling

It does not make much sense to refuse to disable a slot if an adapter is not present or the latch is open. If an adapter is not present, it provides an even better reason to disable the device slot.

This is specially a problem for link state hot-plug, because some ports use in band mechanism for presence detection. Thus when link goes down, presence detect also goes down. We _want_ that the removal should take place in such case.

Thus remove the checks for adapter and latch in pciehp_disable_slot()

---
v3: * created by splitting the patch v2 [2/4]
* Remove the check for latch as well
v2: (non existent)
v1: (non existent)

 drivers/pci/hotplug/pciehp_ctrl.c |   18 ------------------
 1 file changed, 18 deletions(-)

index 7ae7b02..e934618 100644
@@ -612,24 +612,6 @@ int pciehp_disable_slot(struct slot *p_slot)
 	if (!p_slot->ctrl)
 		return 1;
 
-	if (!HP_SUPR_RM(p_slot->ctrl)) {
-		ret = pciehp_get_adapter_status(p_slot, &getstatus);
-		if (ret || !getstatus) {
-			ctrl_info(ctrl, "No adapter on slot(%s)\n",
-				  slot_name(p_slot));
-			return -ENODEV;
-		}
-	}
-
-	if (MRL_SENS(p_slot->ctrl)) {
-		ret = pciehp_get_latch_status(p_slot, &getstatus);
-		if (ret || getstatus) {
-			ctrl_info(ctrl, "Latch open on slot(%s)\n",
-				  slot_name(p_slot));
-			return -ENODEV;
-		}
-	}
-
 	if (POWER_CTRL(p_slot->ctrl)) {
 		ret = pciehp_get_power_status(p_slot, &getstatus);
 		if (ret || !getstatus) {

1.7.9.5