serial_sh: add support for SH7753
Shimoda
PATCH v2 3/3 serial_sh: add support for SH7753
Signed-off-by Yoshihiro Shimoda <[email protected]>
---
about v2:
- The patch doesn't remove the CONFIG_CPU_SH7752.
drivers/serial/serial_sh.h | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-)
drivers/serial/serial_sh.h +3 -1
@@ -143,7 +143,9 @@ struct uart_port {#elif defined(CONFIG_H8S2678 )# define SCSCR_INIT (port) 0x30/* TIE=0,RIE=0,TE=1,RE=1 */ # define H8300_SCI_DR (ch) (*(volatile char *)(P1DR + h8300_sci_pins[ch].port)) -#elif defined(CONFIG_CPU_SH7757 ) || defined(CONFIG_CPU_SH7752 ) +#elif defined(CONFIG_CPU_SH7757 ) || \ + defined(CONFIG_CPU_SH7752 ) || \ + defined(CONFIG_CPU_SH7753 )# define SCSPTR0 0xfe4b0020# define SCSPTR1 0xfe4b0020# define SCSPTR2 0xfe4b0020
Signature · 1 line
1.7.1
Nobuhiro Iwamatsu
AppliedPATCH v2 3/3 serial_sh: add support for SH7753
Hi,
Applied, thanks.
Nobuhiro
2013/12/18 Shimoda, Yoshihiro <[email protected]>:
Quoted 25 lines
Signed-off-by Yoshihiro Shimoda <[email protected]>---
about v2:
- The patch doesn't remove theCONFIG_CPU_SH7752.drivers/serial/serial_sh.h | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-)drivers/serial/serial_sh.h +3
-2@@ -143,7 +143,9 @@ struct uart_port {#elif defined(CONFIG_H8S2678 )# define SCSCR_INIT (port) 0x30/* TIE=0,RIE=0,TE=1,RE=1 */ # define H8300_SCI_DR (ch) (*(volatile char *)(P1DR + h8300_sci_pins[ch].port)) -#elif defined(CONFIG_CPU_SH7757 ) || defined(CONFIG_CPU_SH7752 ) +#elif defined(CONFIG_CPU_SH7757 ) || \ + defined(CONFIG_CPU_SH7752 ) || \ + defined(CONFIG_CPU_SH7753 )# define SCSPTR0 0xfe4b0020# define SCSPTR1 0xfe4b0020# define SCSPTR2 0xfe4b0020 --1.7.1
Signature · 3 lines
Nobuhiro Iwamatsu
iwamatsu at {nigauri.org / debian.org}
GPG ID: 40AD1FA6