i2c driver for mini2440
Hello all,
I would like to add an i2c driver for the mini2440 board to barebox. Before I dive into this I wanted to know if someone else has already done this.
Also I could not find much documentation on how to do this or where to get started. Can anyone provide any pointers or suggestions?
Thank you,
G Rodriguez
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Quoted 7 lines
Hello all,
I would like to add an i2c driver for the mini2440 board to barebox. Before I dive into this I wanted to know if someone else has already done this.
Also I could not find much documentation on how to do this or where to get started. Can anyone provide any pointers or suggestions?
Naked driver does nothing.
It would be better if you would tell where it will be used.
---
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Hi Alexander,
Thank you for your reply.
A naked driver would already be useful with the i2c command, which allows to read and write i2c data from the command line (see commands/i2c.c)
The goal is to read configuration parameters from an i2c EEPROM onboard.
BR,
Guillermo Rodriguez
Quoted 5 lines · Alexander Shiyan
Quoted 5 lines
Hello all,
I would like to add an i2c driver for the mini2440 board to barebox. Before I dive into this I wanted to know if someone else has already done this.
Quoted 8 lines
Quoted 2 lines
Also I could not find much documentation on how to do this or where to get started. Can anyone provide any pointers or suggestions?
Naked driver does nothing.
It would be better if you would tell where it will be used.---
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox