Skip to contentSkip to conversation

Out of the box (ootb) multicast broken since Linux 3.5 until min. 3.12.

DISCUSSION Andreas Hartmann 1 participant 1 message Jan 8, 2014

lore
Share & tools
lore
#0 lore raw

Hello!

This patch:

commit c5c23260594c5701af66ef754916775ba6a46bbc

Author: Herbert Xu <[email protected]>
Date:   Fri Apr 13 02:37:42 2012 +0000

bridge: Add multicast_querier toggle and disable queries by default

Sending general queries was implemented as an optimisation to speed up convergence on start-up. In order to prevent interference with multicast routers a zero source address has to be used.

Unfortunately these packets appear to cause some multicast-aware switches to misbehave, e.g., by disrupting multicast packets to us.

Since the multicast snooping feature still functions without sending our own queries, this patch will change the default to not send queries.

For those that need queries in order to speed up convergence on start-up, a toggle is provided to restore the previous behaviour.

incompatibly broke ootb multicast in Linux until 3.12 or even higher (didn't test) for this use case:

http://thread.gmane.org/gmane.linux.kernel/1622550

It is necessary to manually add this switch

echo "1" > /sys/devices/virtual/net/br0/bridge/multicast_querier

to get multicast working again.

Would be nice to get the old behaviour (= working multicast ootb) back again. This would have saved a lot of time, probably not only in my case here (e.g. see https://bugzilla.redhat.com/show_bug.cgi?id=880035).

Regards,
Andreas