: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400
Robert, is there a patch for this case?
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1152484/comments/12
3.10.2 - 3.13.0-0.rc7:
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
microcode: CPU0: new patch_level=0x010000c8
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
[Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #1
kvm: enabling virtualization on CPU1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000c8
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.13.0-0.rc7.git2.2.fc21.x86_64 #1
[Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #2
kvm: enabling virtualization on CPU2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000c8
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
[Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
perf: IBS APIC setup failed on cpu #3
kvm: enabling virtualization on CPU3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000c8
CPU3 is up
ACPI: Waking up from system sleep state S3
poma
Quoted 3 lines · poma
Robert, is there a patch for this case?
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1152484/comments/12
I just sent a patch to lkml that fixes this:
https://lkml.kernel.org/r/[email protected]
-Robert
Quoted 37 lines
3.10.2 - 3.13.0-0.rc7:
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
microcode: CPU0: new patch_level=0x010000c8
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC0x1
[Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector0x400, but the register is already in use for vector0xf9on another cpu
perf: IBS APIC setup failed on cpu #1
kvm: enabling virtualization on CPU1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000c8
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC0x2CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.13.0-0.rc7.git2.2.fc21.x86_64 #1[Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector
0x400, but the register is already in use for vector0xf9on another cpu
perf: IBS APIC setup failed on cpu #2
kvm: enabling virtualization on CPU2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000c8
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC0x3
[Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector0x400, but the register is already in use for vector0xf9on another cpu
perf: IBS APIC setup failed on cpu #3
kvm: enabling virtualization on CPU3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000c8
CPU3 is up
ACPI: Waking up from system sleep state S3poma
Quoted 11 lines · Robert Richter
Quoted 3 lines · poma
Robert, is there a patch for this case?
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1152484/comments/12I just sent a patch to lkml that fixes this:
https://lkml.kernel.org/r/[email protected]
-Robert
All right!
…
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
microcode: CPU0: new patch_level=0x010000c8 Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
kvm: enabling virtualization on CPU1
process: Switch to broadcast mode on CPU1
microcode: CPU1: new patch_level=0x010000c8 CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
kvm: enabling virtualization on CPU2
process: Switch to broadcast mode on CPU2
microcode: CPU2: new patch_level=0x010000c8 CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
kvm: enabling virtualization on CPU3
process: Switch to broadcast mode on CPU3
microcode: CPU3: new patch_level=0x010000c8 CPU3 is up
ACPI: Waking up from system sleep state S3 …
Lookin good!
Thanks!
poma